1. Introduktion
Tak for købetasing the CASIO TQ-720J-3JF Analog Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
2. Produktet er slutview
The CASIO TQ-720J-3JF is an analog alarm clock featuring radio reception for accurate timekeeping, a loud twin-bell alarm, snooze function, and an integrated light. Its classic design is complemented by modern functionality.
Figur 2.1: Forside View af vækkeuret
This image displays the front of the Casio TQ-720J-3JF alarm clock. It features a green casing, an analog dial with clear black numbers from 1 to 12, and two prominent silver bells on top, characteristic of a traditional twin-bell alarm clock.
Nøglefunktioner:
- Radio reception function (automatic/manual) for precise time synchronization.
- Radio wave reception ON/OFF function.
- Loud bell alarm with snooze capability.
- Integrated light with afterglow function for visibility in low light.
- Second hand stop function during alarm setting.
- Step second hand movement.
Figur 2.2: Bagside View og kontroller
This image shows the back of the alarm clock, highlighting the battery compartment, the time adjustment knob, the alarm setting knob, and the switch for enabling or disabling radio wave reception.
3. Opsætning
3.1 Batteriinstallation
- Åbn batteridækslet på bagsiden af uret (se figur 2.2).
- Isæt to (2) AA alkaliske batterier, og sørg for at polerne vender korrekt (+/-).
- Luk batterirummets dæksel forsvarligt.
3.2 Initial Time Setting and Radio Reception
This clock is equipped with a radio reception function to automatically synchronize the time. For optimal reception, place the clock near a window or in an area with good signal strength.
Figure 3.1: Radio Wave Reception Feature
This diagram visually represents the 'Wave Ceptor' technology, indicating the clock's ability to receive radio signals for accurate time synchronization. It also shows the ON/OFF control for this feature.
- Automatisk modtagelse: After battery installation, the clock will attempt to receive radio signals and set the time automatically. This process may take several minutes.
- Manuel modtagelse: If automatic reception fails or you wish to initiate it manually, press and hold the 'RECEIVE' button (if present, or refer to specific button on back, typically labeled with a signal icon) until the hands start moving.
- Radio Wave Reception ON/OFF: Use the dedicated switch on the back of the clock to enable or disable the radio reception function. Disabling it will prevent automatic time synchronization, and you will need to set the time manually.
- Manual Time Adjustment (if radio reception is off or unavailable): Rotate the time setting knob (refer to Figure 2.2) to adjust the hour and minute hands to the correct time.
4. Betjeningsvejledning
4.1 Indstilling af alarmen
- Find alarmindstillingsknappen på bagsiden af uret (se figur 2.2).
- Rotate the alarm setting knob to move the small alarm hand to your desired alarm time.
- Ensure the alarm ON/OFF switch (usually a small lever on the side or back) is in the 'ON' position.
- The twin-bell alarm will sound at the set time.
4.2 Snooze -funktion
When the alarm sounds, press the large button located on the top of the clock (often integrated with the light button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, depending on the model).
4.3 Using the Light
Press the light button (usually the same as the snooze button on top) to illuminate the clock face. The light features an afterglow function, meaning it will remain lit for a short period after the button is released, allowing you to read the time in the dark.
4.4 Second Hand Stop Function
When setting the alarm, the second hand will automatically stop moving. This feature helps in precisely setting the alarm time without distraction and conserves battery power during the alarm setting process.
5. Vedligeholdelse
- Rensning: Tør uret af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen.
- Udskiftning af batteri: Replace batteries promptly when the clock's functions (e.g., alarm, light) become weak or stop working. Always replace both batteries at the same time with new AA alkaline batteries.
- Opbevaring: If storing the clock for an extended period, remove the batteries to prevent leakage and potential damage.
6. Fejlfinding
- Clock not keeping accurate time:
- Check if the radio reception function is enabled.
- Ensure the clock is in an area with good radio signal reception.
- Udskift batterierne, hvis de er lave.
- If radio reception is consistently poor, manually set the time.
- Alarmen lyder ikke:
- Verify that the alarm ON/OFF switch is in the 'ON' position.
- Kontroller batteriniveauet og udskift det om nødvendigt.
- Ensure the alarm hand is correctly set to the desired time.
- Lyset virker ikke:
- Udskift batterierne.
7. Specifikationer
- Model: TQ-720J-3JF
- Dimensioner (H x B x D): Cirka 14.9 cm x 11.3 cm x 7.7 cm (5.8 x 4.5 x 3.0 tommer)
- Vægt: Cirka 385 gram (13.5 oz)
- Materiale: Harpiks, metal
- Strømforsyning: 2 x AA alkaline batterier
- Skærmtype: Analog
- Særlige funktioner: Radio reception, Bell alarm, Snooze, Light (with afterglow), Second hand stop function
Figur 7.1: Produktmål og vægt
This image provides a visual representation of the alarm clock's physical dimensions, indicating its height, width, and depth, along with its approximate weight.
8. Garanti og support
For warranty information, please refer to the warranty card included with your product or contact your local Casio distributor or retailer. For technical support or further assistance, please visit the official Casio webwebsted eller kontakt deres kundeserviceafdeling.
