WEN JN8504 8.5-Amp Plade- og kikseforbinder og JN100B #0 birketræskiks instruktionsmanual

Indledning

This manual provides essential instructions for the safe operation, maintenance, and care of your WEN JN8504 8.5-Amp Plate and Biscuit Joiner and WEN JN100B #0 Birch Wood Biscuits. Please read this manual thoroughly before using the product to ensure proper function and to prevent injury. Keep this manual accessible for future reference.

Generelle sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elværktøj, for at reducere risikoen for brand, elektrisk stød og personskade.

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
• Personlig sikkerhed: Brug altid øjenbeskyttelse. Brug høreværn, når du bruger støjende værktøj. Klæd dig korrekt på; undgå løstsiddende tøj eller smykker. Fastgør langt hår.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Opretholdelse: Vedligehold elværktøj. Kontroller for forskydning eller binding af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke elværktøjets funktion.

Produktkomponenter

The WEN JN8504 Plate and Biscuit Joiner kit includes the following components:

• WEN JN8504 Plate and Biscuit Joiner
• Detachable Dust Bag
• 4-inch Carbide-Tipped Blade (pre-installed)
• 24 #20 Wood Biscuits
• 16 #10 Wood Biscuits
• 10 #0 Wood Biscuits (WEN JN100B)
• Blow Mold Carrying Case
• Wrench for blade changes

Image 1: WEN JN8504 Plate and Biscuit Joiner, including the carrying case, various sized biscuits, and a wrench.

Billede 2: Detaljeret view of the WEN JN8504 Plate Joiner's adjustable fence and depth settings.

Image 3: A pile of WEN #0 Birch Wood Biscuits, designed for strong wood joints.

Opsætning

1. Udpakning: Carefully remove all components from the carrying case. Inspect for any damage that may have occurred during shipping.
2. Støvposetilbehør: Attach the detachable dust bag to the dust port on the joiner. Ensure it is securely fastened to collect sawdust during operation.
3. Bladinspektion: Verify that the 4-inch carbide-tipped blade is securely installed and free from damage. If replacement is needed, refer to the Maintenance section.
4. Strømtilslutning: Connect the joiner to a suitable power outlet. Ensure the power switch is in the "OFF" position before plugging in.

Betjeningsvejledning

The WEN JN8504 Plate and Biscuit Joiner is designed for creating strong, precise joints in various woodworking projects.

Adjusting the Fence and Depth

1. Vinkeljustering: The fence can be set between 0 to 90 degrees. Loosen the angle adjustment knob, set the desired angle using the scale, and tighten the knob securely.
2. Højdejustering: Adjust the fence height to accommodate different material thicknesses. Loosen the height adjustment knob, position the fence, and tighten.
3. Dybdejustering: The joiner features pre-set stops for standard #0, #10, and #20 biscuits. Select the appropriate stop for your biscuit size. For unique sizes, the depth can be manually adjusted.

Image 4: The WEN JN8504 Plate Joiner demonstrating its adjustable fence for angled cuts.

Making a Joint

1. Mærkning: Mark the desired locations for biscuit slots on both workpieces.
2. Placering: Place the workpiece firmly on a stable surface. Align the joiner's fence with your marks.
3. Skæring: Hold the joiner firmly with both hands. Turn on the tool and allow the blade to reach full speed. Plunge the blade into the workpiece to cut the slot. Withdraw the tool once the cut is complete.
4. Gentage: Make corresponding cuts on the mating workpiece.
5. Forsamling: Apply wood glue to the biscuit slots and insert the appropriate size biscuits (e.g., #0, #10, #20). Join the two workpieces together and clamp until the glue dries.

This joiner is suitable for various joint types, including:

• Edge miter joints
• Hjørnesamlinger
• T joints
• Offset joints
• Frame joints
• Edge-to-edge joints

Using WEN JN100B #0 Birch Wood Biscuits

The WEN JN100B #0 Birch Wood Biscuits are designed to expand upon contact with water-based glues, providing maximum reinforcement for your woodworking joints.

• Størrelse: These #0 biscuits measure 47 by 15 by 4 mm.
• Materiale: Comprised of FSC-certified compressed birch wood with diagonal-running wood grain for optimal strength.
• Anvendelse: Ideal for joining sheet goods, squaring edges, and enhancing overall joint strength in lumber, plywood, and composite board.

Billede 5: Et nærbillede view of a single WEN #0 Birch Wood Biscuit, highlighting its construction.

Opretholdelse

• Rensning: After each use, disconnect the tool from power. Clean the tool with a soft, dry cloth. Remove any sawdust or debris from the dust port and around the blade area.
• Udskiftning af knive: If the blade becomes dull or damaged, replace it with a new 4-inch carbide-tipped blade. Use the provided wrench to loosen the blade retaining nut, replace the blade, and tighten securely. Ensure the blade is installed with the teeth facing the correct direction.
• Opbevaring: Store the joiner and biscuits in their carrying case in a dry, secure location, out of reach of children.

Fejlfinding

Specifikationer

Garanti og kundesupport

WEN products are backed by a commitment to customer satisfaction. For warranty information, technical assistance, or to inquire about replacement parts, please contact WEN customer support.

Refer to your product's packaging or the official WEN webwebstedet for de seneste kontaktoplysninger og garantioplysninger.