NOTIFIER N-ANN-80-W Fjernbetjening LCD-indikator Brugsanvisning

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the NOTIFIER N-ANN-80-W Remote LCD Annunciator. The N-ANN-80-W is designed to provide remote annunciation of system status and events from a compatible Fire Alarm Control Panel (FACP). It features an 80-character liquid crystal display (LCD) for clear and concise information display.

Læs venligst denne manual grundigt, inden du forsøger at installere eller betjene enheden, for at sikre korrekt funktionalitet og sikkerhed.

2. Sikkerhedsoplysninger

Always observe the following safety precautions during installation, operation, and maintenance:

• Installationen skal udføres af kvalificeret personale i overensstemmelse med alle lokale og nationale elektriske forskrifter og standarder.
• Disconnect all power sources before servicing the annunciator or any connected equipment.
• Sørg for korrekt jording for at forhindre elektrisk stød.
• Udsæt ikke enheden for fugt eller ekstreme temperaturer.
• Brug kun godkendte reservedele og tilbehør.
• Refer to the Fire Alarm Control Panel (FACP) manual for specific wiring and compatibility requirements.

3. Produktet er slutview

The NOTIFIER N-ANN-80-W Remote LCD Annunciator provides a clear, real-time display of fire alarm system events and status. Its compact design and intuitive interface make it suitable for various applications where remote monitoring is required.

Figur 1: Front view of the NOTIFIER N-ANN-80-W Remote LCD Annunciator, showing the 80-character LCD display, navigation buttons, status indicators, and control buttons.

Nøglekomponenter:

• 80-Character LCD Display: Shows system status, event messages, and menu options.
• Navigationsknapper: Used to scroll through messages and menu options (Up, Down, Left, Right, Select).
• Kontrolknapper:
  • Alarm: Indikerer en alarmtilstand.
  • Besvær: Angiver en systemfejltilstand.
  • Tilsyn: Indicates a supervisory condition.
  • Stilhed: Dæmper hørbare alarmer.
  • Nulstil: Resets the fire alarm control panel.
  • Anerkende: Acknowledges new events.
  • AC strøm: Indikerer AC-strømstatus.
• Statusindikatorer: LEDs for various system states (e.g., Alarm, Trouble, Supervisory, AC Power).

4. Opsætning og installation

Before beginning installation, ensure that all power to the Fire Alarm Control Panel (FACP) is disconnected. Refer to the FACP installation manual for specific wiring diagrams and compatibility information.

4.1 Mounting the Annunciator

1. Select a suitable mounting location that is clean, dry, and within the specified operating temperature range.
2. Secure the annunciator enclosure to a wall or suitable surface using appropriate fasteners. Ensure the mounting is stable and secure.

4.2 Ledningsforbindelser

The N-ANN-80-W connects to the FACP via a communication bus. Specific wiring details will depend on the FACP model. Always follow the FACP manufacturer's instructions for wiring remote annunciators.

• Connect the communication wires from the FACP to the designated terminals on the N-ANN-80-W. Observe polarity.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede.
• If external power is required (e.g., for battery backup), connect the power source to the appropriate terminals, observing voltage og aktuelle vurderinger.

4.3 Opstart og indledende test

1. Once all wiring is complete and verified, restore power to the FACP and the N-ANN-80-W.
2. The annunciator should power on and display its initial startup sequence.
3. Verify communication with the FACP by checking for normal system status messages on the LCD.
4. Perform a functional test by initiating an alarm or trouble condition at the FACP to confirm proper annunciation on the N-ANN-80-W.

5. Betjeningsvejledning

The N-ANN-80-W provides a user-friendly interface for monitoring and controlling the fire alarm system remotely.

5.1 Forstå skærmen

The 80-character LCD displays system events, status messages, and menu options. Messages typically include event type (e.g., ALARM, TROUBLE), zone/device location, and time/date.

5.2 Navigationsknapper

• Pil op/ned: Scroll through multiple event messages or menu options.
• Venstre/højre pile: May be used for navigating within a message or selecting sub-menus, depending on FACP programming.
• Vælg knap: Bekræfter et valg eller går ind i en menu.

5.3 Betjeningsknapper

• ACKNOWLEDGE: Press to acknowledge new events. This silences the annunciator's internal sounder and changes the event status from "new" to "acknowledged" on the display.
• STILHED: Press to silence the system's audible alarms (e.g., horns, strobes). This action typically requires FACP programming to be enabled from the annunciator.
• NULSTIL: Press to reset the fire alarm control panel after an alarm or trouble condition has been resolved. This action typically requires FACP programming to be enabled from the annunciator.

Note: The exact functionality of the SILENCE and RESET buttons from the N-ANN-80-W depends on the programming of the connected Fire Alarm Control Panel. Consult your FACP manual for details.

6. Vedligeholdelse

The N-ANN-80-W requires minimal maintenance to ensure continued reliable operation.

• Rensning: Periodically clean the exterior of the annunciator with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Visuel inspektion: Regularly inspect the annunciator for any signs of damage, loose connections, or environmental issues.
• Funktionstest: As part of routine fire alarm system testing, verify the annunciator's display and control functions. Refer to NFPA 72 and local codes for testing frequency.
• Batteriudskiftning (hvis relevant): If the annunciator utilizes a backup battery, ensure it is replaced according to the manufacturer's recommendations or when indicated by a trouble condition.

7. Fejlfinding

This section provides solutions to common issues encountered with the N-ANN-80-W. For more complex problems, contact qualified service personnel.

8. Specifikationer

9. Garanti og support

For specific warranty information, please refer to the documentation provided with your purchase or contact Notifier directly. Technical support is available through authorized Notifier distributors and service providers.

For assistance, please contact your local Notifier representative or visit the official Notifier webwebsted for supportressourcer.