Indledning
Thank you for choosing the Scheppach BTS900 Belt and Disc Sander. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
Sikkerhedsinstruktioner
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and a dust mask. Ensure the tool is disconnected from the power source before making any adjustments or changing accessories.
- Læs alle instruktioner, før du bruger værktøjet.
- Hold børn og omkringstående væk, mens du betjener et elværktøj.
- Gå ikke for langt. Hold hele tiden ordentligt fodfæste og balance.
- Fastgør emnet. Brug klampeller en skruestik til at holde emnet.
- Undgå utilsigtet start. Sørg for, at kontakten er i slukket position, før du tilslutter den.
- Vedligehold værktøj med omhu. Hold skæreværktøj skarpt og rent.
- Brug det rigtige værktøj til din applikation.
Opsætning og montering
Before operating the sander, ensure it is properly assembled and secured. The Scheppach BTS900 is designed for stability with its cast iron housing.
1. Udpakning og inspektion
Carefully remove all components from the packaging. Inspect for any damage that may have occurred during transit. Report any damage to your supplier immediately.
2. Securing the Sander
Place the sander on a stable, level workbench. The cast iron housing provides inherent stability, but for prolonged or heavy use, it is recommended to bolt the unit to the workbench using appropriate fasteners (not included).
Figur 1: The Scheppach BTS900 Belt and Disc Sander with included abrasives. This image shows the overall unit, highlighting its compact design and the separate belt and disc sanding areas.
3. Attaching the Work Table
Attach the work table to the disc sander side. Ensure it is securely fastened. The table can be tilted from 0-45° and is equipped with a scale for precise angle adjustments.
Figur 2: Et nærbillede view of the disc sanding area, showing the adjustable work table and the disc abrasive. The table allows for precise angle adjustments for various sanding tasks.
4. Installing Abrasives
Disc Abrasives: The discs are designed for easy attachment thanks to their hook and loop coating. Simply align the new disc with the sanding plate and press firmly.
Belt Abrasives: To install or replace the sanding belt, release the tensioning lever (refer to the diagram on the machine for location). Slide the old belt off and slide the new belt on, ensuring the directional arrow on the belt matches the arrow on the machine. Re-engage the tensioning lever.
Figur 3: This image provides a closer look at the power switch (green for ON, red for OFF) and the disc sanding area, emphasizing the robust construction and user-friendly controls.
Betjeningsvejledning
The Scheppach BTS900 features a powerful, quiet, and efficient induction motor for consistent performance.
1. Strømtilslutning
Connect the sander to a standard 230-volt power outlet. Ensure the power switch is in the OFF position before plugging in.
2. Adjusting the Belt Sander Arm
The arm supporting the sanding belt can be positioned at an angle from 0-90°, allowing for both vertical and horizontal sanding operations. Loosen the locking knob, adjust the arm to the desired angle, and then securely tighten the knob.
Figur 4: This image demonstrates the versatility of the belt sander arm, showing it adjusted to various angles from horizontal to vertical, allowing for flexible sanding applications.
3. Adjusting the Disc Sander Work Table
The sanding table for the disc can be tilted from 0-45°. Use the angle scale for precise adjustments. Loosen the locking mechanism, set the desired angle, and re-tighten.
Figur 5: The disc sander's work table is shown tilted, illustrating its capability for angled sanding tasks. This feature enhances precision for various woodworking projects.
4. Slibeoperation
Turn on the sander using the green power button. Allow the belt and disc to reach full speed before applying the workpiece.
Båndslibning: Gently apply the workpiece to the moving belt. Use even pressure and move the workpiece consistently across the belt for uniform results.
Skiveslibning: For disc sanding, apply the workpiece to the side of the disc that is moving downwards towards the table. This helps to prevent the workpiece from being thrown upwards.
Always ensure the workpiece is stable and held firmly. Do not apply excessive pressure, as this can overload the motor and reduce sanding efficiency.
Figur 6: A user is shown operating the disc sander, carefully sanding a small wooden piece. This illustrates proper technique for disc sanding, emphasizing control and precision.
Figur 7: This image depicts a user utilizing the belt sander in its vertical orientation, sanding a longer piece of wood. It highlights the flexibility of the adjustable belt arm for different workpiece sizes and shapes.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your Scheppach BTS900 sander.
1. Rensning
After each use, disconnect the power and clean the machine. Remove dust and debris from the sanding areas, motor vents, and work tables. A vacuum cleaner or compressed air can be used. Ensure all dust collection ports are clear.
2. Abrasive Replacement
Replace sanding belts and discs when they become worn or lose their abrasive quality. Refer to the "Setup and Assembly" section for instructions on changing abrasives.
3. Generelt eftersyn
Periodically check all fasteners for tightness. Inspect the power cord for any signs of damage. If any part is damaged, have it repaired by a qualified service technician before further use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sander starter ikke | No power supply; Faulty power switch; Motor overload protection activated. | Check power connection and outlet; Ensure switch is ON; Allow motor to cool down, then restart. |
| Dårlig slibeydelse | Worn abrasive belt/disc; Incorrect abrasive grit; Excessive pressure applied. | Replace abrasive; Use appropriate grit for material; Reduce pressure. |
| Overdreven vibration/støj | Loose components; Unbalanced abrasive; Unit not securely mounted. | Check and tighten all fasteners; Replace abrasive; Securely mount the sander to a workbench. |
| Problemer med sporing af bælte | Belt not centered; Tension incorrect. | Adjust belt tracking mechanism (refer to machine diagram); Ensure belt tension is correct. |
Tekniske specifikationer
- Mærke: Scheppach
- Model: BTS900
- Varenummer: 5903306901
- Strømkilde: Elektrisk med ledning
- Voltage: 230 volt
- Motoreffekt: 370W
- Maksimal rotationshastighed: 2850 RPM
- Disc Sanding Plate Diameter: Ø150 mm
- Produktdimensioner: 12.6"H
- Varens vægt: 41.3 pund
- Korntype: Medium
- Belt Arm Adjustment: 0-90° vertical to horizontal
- Sanding Table Tilt: 0-45°
Garantioplysninger
Specific warranty terms and conditions for the Scheppach BTS900 Belt and Disc Sander are typically provided with the product packaging or can be found on the official Scheppach website. Please retain your proof of purchase for any warranty claims. For detailed information, refer to the warranty card included with your product or contact Scheppach customer service.
Kundesupport
For technical assistance, spare parts, or service inquiries regarding your Scheppach BTS900 Belt and Disc Sander, please contact Scheppach customer support. Contact details can usually be found on the official Scheppach webwebstedet eller i den dokumentation, der følger med dit produkt.
Webwebsted: www.scheppach.com (Tjek venligst din regionale webwebsted)
