Scheppach bånd- og skivesliber BTS900 brugermanual

1. Sikkerhedsinstruktioner

Always observe basic safety precautions when operating this power tool to reduce the risk of fire, electric shock, and personal injury. Retain these instructions for future reference.

Generel sikkerhed

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Stik på elværktøj skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Undgå kropskontakt med jordforbundne overflader såsom rør, radiatorer, komfurer og køleskabe.
• Personlig sikkerhed: Always wear eye protection. Use dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.

Slibemaskinespecifik sikkerhed

• Fastgør emnet. Brug clamps or a vise to hold the workpiece. This is safer than using your hand and frees both hands to operate the tool.
• Always use the correct type and size of sanding belt or disc for the material being sanded.
• Ensure the sanding belt or disc is properly installed and tensioned before operation.
• Connect a dust extraction system to minimize dust exposure, especially when sanding wood or other materials that produce fine particles.
• Slib aldrig materialer, der indeholder asbest.
• Do not wear gloves when operating the sander, as they can get caught in moving parts.

2. Pakkens indhold

Verify that all items are present and undamaged upon unpacking. If any parts are missing or damaged, contact your retailer immediately.

• Scheppach BTS900 Belt and Disc Sander unit
• Sanding table with miter gauge
• 6 x Sanding belts
• 6 x Sanding discs (Ø150mm)
• Brugermanual

Image 2.1: The Scheppach BTS900 Belt and Disc Sander, shown with the included sanding belts and discs.

3. Opsætning

3.1 Udpakning og placering

1. Fjern forsigtigt alle komponenter fra emballagen.
2. Place the sander on a stable, level workbench. The cast iron housing provides stability, but ensure the surface can support its weight.
3. Ensure adequate clearance around the machine for safe operation and dust extraction.

3.2 Attaching the Sanding Table

1. Attach the sanding table to the disc sander side using the provided fasteners.
2. Ensure the table is securely fastened and can be tilted smoothly.

Billede 3.1: Nærbillede view of the disc sander area, showing the sanding table and its attachment point.

3.3 Installing Sanding Discs

The sanding discs attach easily thanks to the hook and loop coating.

1. Ensure the disc pad is clean and free of debris.
2. Align the new sanding disc with the disc pad and press firmly to secure it.

3.4 Installing Sanding Belts

1. Release the belt tension lever (refer to the diagram on the machine for location).
2. Slide the new sanding belt onto the rollers, ensuring the arrow on the belt matches the direction of rotation indicated on the machine.
3. Re-engage the belt tension lever.
4. Adjust the belt tracking if necessary by turning the tracking knob until the belt runs centrally on the rollers.

Billede 3.2: Bagside view illustrating the belt mechanism and the dust extraction port.

3.5 Tilslutning til støvudsugning

Connect a suitable dust extraction system to the dust port located at the rear of the machine. This helps maintain a clean work environment and prolongs abrasive life.

4. Betjeningsvejledning

4.1 Tænd/sluk

The machine is equipped with a power switch (green for ON, red for OFF) located on the front panel.

Billede 4.1: Side view highlighting the power switch and Scheppach branding.

4.2 Brug af båndsliberen

The sanding belt arm can be positioned from 0-90° (vertical to horizontal) to accommodate various workpieces and sanding tasks.

1. Loosen the locking knob for the belt arm adjustment.
2. Adjust the belt arm to the desired angle.
3. Spænd låseknappen godt fast.
4. Turn on the sander.
5. Apply the workpiece gently to the moving belt, using even pressure.

Image 4.2: The sanding belt arm shown in multiple adjustable positions, from horizontal to vertical.

Image 4.3: A user sanding a wooden workpiece using the belt sander in its vertical orientation.

4.3 Brug af skivesliberen

The sanding table for the disc sander can be tilted from 0-45° and is equipped with a scale for precise angle adjustments.

1. Adjust the sanding table to the desired angle using the tilt mechanism and scale. Secure it firmly.
2. Turn on the sander.
3. Present the workpiece to the rotating disc, moving it across the disc surface to ensure even wear of the abrasive.

Image 4.4: A user sanding a small wooden block on the disc sander, demonstrating typical use.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din slibemaskines levetid og optimale ydeevne.

5.1 Rengøring

• Afbryd altid strømstikket før rengøring.
• Use a brush or compressed air to remove dust and debris from the motor vents and sanding areas.
• Tør udvendige overflader af med adamp klæde. Brug ikke skrappe kemikalier eller opløsningsmidler.

5.2 Abrasive Replacement

• Replace sanding belts and discs when they become worn or clogged to maintain sanding efficiency and prevent damage to the workpiece.
• Follow the installation steps outlined in Section 3.3 and 3.4.

5.3 Justering af bæltesporing

If the sanding belt drifts to one side during operation, adjust the belt tracking knob until the belt runs centrally on the rollers. This prevents premature wear of the belt and machine components.

6. Fejlfinding

7. Specifikationer

• Mærke: Scheppach
• Model: BTS900
• Varenummer: 5903306901
• Strømkilde: Elektrisk med ledning
• Voltage: 230 volt (DC)
• Motoreffekt: 370W (implied from product title, not explicitly in specs but common for this model)
• Maksimal rotationshastighed: 2850 RPM
• Sanding Plate Diameter: Ø150 mm
• Grit Type (Included): Medium
• Grit Number (Included): 240
• Varens vægt: 41.3 pund

8. Garanti og support

Scheppach-produkter er fremstillet efter høje kvalitetsstandarder. For garantioplysninger henvises til garantikortet, der følger med dit produkt, eller besøg den officielle Scheppach-side. website. For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or the Scheppach customer service department.

Please have your model number (BTS900) and serial number (if applicable) ready when contacting support.