1. Produktet er slutview
The hykolity HB-Q10-50 4FT 42W Linkable LED Shop Light is designed for efficient and bright illumination in various utility spaces. This fixture provides 4400 lumens of 5000K Daylight White light, consuming only 42 watts of power. It is ETL certified, ensuring safety and reliability, and offers a lifespan of up to 50,000 hours. The linkable design allows multiple units to be connected for broader coverage.
Image 1: hykolity 4FT 42W Linkable LED Shop Lights (2-pack).
2. Sikkerhedsoplysninger
Læs og forstå venligst alle instruktioner før installation og brug. Gem denne manual til senere brug.
- Elektrisk sikkerhed: Sørg for, at strømmen er afbrudt ved afbryderen før installation eller vedligeholdelse.
- Installation: Install in accordance with national and local electrical codes. If unsure, consult a qualified electrician.
- Miljø: This fixture is designed for indoor use. Do not expose to water or damp forhold.
- Håndtering: Handle with care. The fixture is lightweight but can be damaged if dropped.
- Linker: Do not exceed the maximum number of linkable units (up to 6 units).
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes.
- LED Shop Light Fixture (2 units)
- 59-inch Power Cord with On/Off Switch (2 units)
- Hanging Chains (2 sets)
- J-Hooks (4 units)
- Monteringsskruer (4 enheder)
- Plastic Anchors (4 units)
- Monteringsbeslag (4 enheder)
Image 2: Included accessories and product dimensions.
4. Specifikationer
| Modelnummer | HB-Q10-50 |
| Wattage | 42W |
| Lumen output | 4400 lm |
| Farvetemperatur | 5000K dagslys hvid |
| Levetid | Op til 50,000 timer |
| Dimensioner (L x B x H) | 46.5 cm x 3.5 cm x 3.5 cm |
| Materiale | Plastic, Polycarbonate (PC) |
| Voltage | 100-277 volt |
| Certificering | ETL opført |
| Installationstype | Hængende / Overflademontering |
| Speciel funktion | Linkable (up to 6 units) |
5. Installationsvejledning
Before starting, ensure the power supply is turned off at the circuit breaker.
5.1 Hanging Mount
- Determine the desired hanging location. Mark two points on the ceiling or beam where the J-hooks will be installed. Ensure the distance between the points matches the length of the fixture.
- Drill pilot holes at the marked locations. If installing into drywall, use plastic anchors.
- Screw the J-hooks into the pilot holes until secure.
- Attach the hanging chains to the fixture's end caps.
- Hang the fixture by attaching the chains to the installed J-hooks. Adjust chain length as needed to achieve the desired height.
Image 3: Hanging and Surface Mount Installation Methods.
5.2 Surface Mount
- Determine the desired mounting location on the ceiling or wall. Mark two points for the mounting brackets, ensuring they align with the fixture's length.
- Drill pilot holes at the marked locations. If installing into drywall, use plastic anchors.
- Secure the mounting brackets to the surface using the provided screws.
- Align the fixture with the installed brackets and snap it into place. Ensure it is securely fastened.
Billede 4: Detaljeret view of installation hardware and methods.
6. Betjeningsvejledning
6.1 Tænd/sluk
Once the fixture is securely installed, plug the 59-inch power cord into a standard electrical outlet. Use the integrated on/off switch on the power cord to control the light.
Image 5: Power cord with on/off switch.
6.2 Linkable Feature
The hykolity LED Shop Light features a linkable design, allowing you to connect up to 6 units together using the provided linking cables. This enables a single power source to operate multiple fixtures, ideal for larger spaces.
- Ensure all fixtures are unplugged from the power source before linking.
- Connect the linking cable from the output port of one fixture to the input port of the next fixture.
- Repeat for additional fixtures, up to a maximum of 6 units.
- Plug the first fixture's power cord into an outlet. All linked fixtures will operate simultaneously.
Image 6: Linkable design for connecting multiple units.
Image 7: Visual representation of linking multiple shop lights.
7. Vedligeholdelse
The hykolity LED Shop Light is designed for long-lasting, maintenance-free operation. No bulb replacement is required.
- Rensning: Afbryd strømmen før rengøring. Tør armaturet af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Periodically check the power cord and hanging/mounting hardware for any signs of wear or damage.
- Varmeafledning: Ensure adequate airflow around the fixture for optimal heat dissipation. The fixture includes heat dissipation holes for this purpose.
Image 8: Heat dissipation holes on the fixture's end cap.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning; løs forbindelse; defekt afbryder. | Check if the power cord is securely plugged in. Verify the wall outlet has power. Ensure the on/off switch is in the "on" position. Check circuit breaker. |
| Lyse flimrer. | Unstable power supply; loose wiring. | Ensure stable power. Check all connections for tightness. If flickering persists, consult an electrician. |
| Forbundne lys virker ikke. | Incorrect linking; exceeding maximum units. | Verify linking cables are securely connected. Ensure no more than 6 units are linked. Check the power supply to the first fixture. |
9. Garanti og support
hykolity provides a 5-year warranty for this LED Shop Light. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact hykolity customer service through their official website or the retailer where the product was purchased. Please have your model number (HB-Q10-50) and proof of purchase available.
For mere information, besøg den officielle hykolity Store.
10. Produktanvendelse Eks.amples
The hykolity HB-Q10-50 LED Shop Light is versatile and suitable for various environments requiring bright, efficient lighting.
Billede 9: Eks.amples of product application in various settings.
Image 10: Guide for determining the number of LED shop lights needed for a garage.
11. Officiel produktvideo
Watch this video for a visual guide on the features and installation of the hykolity 4FT Linkable LED Shop Light.
Video 1: Officielt produkt slutview and installation guide for the hykolity 4FT Linkable LED Shop Light.
