JAXPETY Modern Wood Nightstand with Drawer (Set of 2)

Indledning

Thank you for choosing the JAXPETY Modern Wood Nightstand with Drawer. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new furniture. Please read this manual thoroughly before beginning assembly and retain it for future reference.

Image: Two JAXPETY Modern Wood Nightstands, one with an open drawer, in a modern living room setting.

Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før montering.
• Hold alle små dele og emballagematerialer væk fra børn og kæledyr.
• Saml på en blød, ren overflade for at forhindre ridser.
• Sørg for, at alle forbindelser er forsvarligt fastspændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
• Do not exceed the maximum weight capacity of 110 pounds (50 kg) for the tabletop.
• Stå ikke på eller klatr ikke på natbordet.
• Use anti-tip hardware if provided, especially if placing heavy items on top or if children are present.

Pakkens indhold

Kontroller, at alle nedenstående komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Nightstand Top Panel (x2)
• Sidepaneler (x4)
• Bottom Panel (x2)
• Bagpanel (x2)
• Skuffefront (x2)
• Drawer Side Panels (x4)
• Drawer Back Panel (x2)
• Drawer Bottom Panel (x2)
• Massive træben (x8)
• Leg Mounting Plates (x8)
• Felt Pads (x8)
• Hardware Pack (screws, cam locks, dowels, drawer slides, handle)
• Assembly Tool (Allen wrench, if applicable)

Opsætnings- og monteringsvejledning

Assembly typically requires a hammer and screwdriver (not included). Follow these steps carefully for each nightstand.

1. Forbered komponenter: Unpack all parts and lay them out on a clean, soft surface. Identify each component using the provided parts list.
2. Attach Leg Mounting Plates: Secure the metal leg mounting plates to the bottom panel of the nightstand using the provided screws. Ensure they are aligned correctly with the pre-drilled holes.
   

   Image: Detail of leg attachment mechanism with a wooden leg and metal plate.
3. Fastgør ben: Screw the solid wood legs into the attached mounting plates. Hand-tighten until secure.
   

   Image: Close-up of the leg with a felt pad and the drawer mechanism.

4. Assemble Nightstand Frame: Connect the side panels, bottom panel, and top panel using the provided hardware (dowels, cam locks, screws). Follow the diagrams in your physical manual for specific orientation.
5. Installer skuffeskinner: Attach the drawer slides to the inner side panels of the nightstand frame and to the drawer side panels according to the instructions. Ensure they are level and aligned for smooth operation.
6. Saml skuffen: Connect the drawer side panels, back panel, and front panel. Slide the drawer bottom panel into the grooves. Attach the handle to the drawer front.
7. Indsæt skuffe: Carefully slide the assembled drawer into the nightstand frame, aligning the drawer slides.
8. Fastgør bagpanelet: Secure the back panel to the rear of the nightstand frame using small nails or screws.
9. Apply Felt Pads: Attach the felt pads to the bottom of each leg to protect your floors.
10. Endelig kontrol: Ensure all screws and connections are tight. Place the nightstand in its desired location.

Betjeningsvejledning

• Skuffebrug: The nightstand features a smoothly pull-out drawer for storage. To open, gently pull the handle. To close, push until it is fully seated. Avoid forcing the drawer.
• Vægt kapacitet: The tabletop is designed to hold up to 110 pounds (50 kg). Distribute weight evenly. Avoid placing excessively heavy items on the open shelf or inside the drawer to prevent damage or instability.
• Placering: Position the nightstand on a flat, stable surface to ensure stability and prevent wobbling.

Opretholdelse

• Rensning: The surface is waterproof and wear-resistant, making it easy to clean. Wipe with a soft, damp cloth using only water. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Støvning: Støv regelmæssigt af med en tør, blød klud.
• Spild: Wipe up spills immediately to prevent staining, especially on the white surface.
• Hardwarekontrol: Periodically check all screws and connections to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• Undgå direkte sollys: Langvarig udsættelse for direkte sollys kan forårsage falmning eller misfarvning.

Fejlfinding

Specifikationer

Image: Dimensional diagram and maximum weight capacity of the nightstand.

• Mærke: JAXPETY
• Modelnavn: Moderne
• Produktmål (D x B x H): 15.75 cm x 11.75 cm x 23.5 cm
• Maksimal vægtanbefaling: 110 pund (50 kg)
• Farve: Hvid
• Materiale Type: P2 + Pinewood
• Rammematerialetype: Fyrretræ
• Top materialetype: P2 + Pinewood
• Grundmateriale: Fyrretræ
• Håndtag Materiale: Træ
• Antal skuffer: 1 pr enhed
• Antal varer: 2 (sæt)
• Varens vægt: 38 pund (for sættet)
• Værktøjer anbefalet til montering: Hammer, Screw Driver
• Indendørs/udendørs brug: Indendørs
• Benstil: Konisk ben

Garanti og support

For specific warranty information regarding your JAXPETY Modern Wood Nightstand, please refer to the documentation included with your purchase or contact JAXPETY customer service directly. Protection plans may be available for extended coverage.

For technical support, missing parts, or any questions regarding this product, please visit the official JAXPETY website or contact their customer support team. Contact details are typically found on the product packaging or the brand's official online presence.

JAXPETY Official Store: Visit JAXPETY Store on Amazon