Roborock Q7+ Selvtømmende Robotstøvsuger Brugsanvisning

1. Produktet er slutview

The roborock Q7+ is a self-emptying robot vacuum designed for efficient and hands-free floor cleaning. It combines powerful suction with advanced navigation and smart features to maintain a clean home environment.

Image: The roborock Q7+ robot vacuum docked with its Auto-Empty Dock Pure, alongside a smartphone displaying the mapping interface.

2. Nøglefunktioner

• Auto-Empty Dock Pure Support: Automatically empties the robot's dustbin, storing up to seven weeks of debris for hands-free convenience.
• 2700Pa sugekraft: HyperForce suction effectively lifts dirt from various floor types, including hard floors and carpets.
• PreciSense Precision LiDAR: Utilizes LiDAR navigation for accurate home mapping and efficient cleaning route tracking.
• Vacuum and Mop Simultaneously: Performs both vacuuming and mopping in a single pass to remove fine dust.
• 3D kortlægning: Creates detailed 3D maps of your home, allowing for virtual furniture placement and floor material customization.
• Smart kontrol: Supports custom routines, multi-level mapping (up to 4 levels), No-Go Zones, Invisible Walls, and voice control integration (Alexa, Google Home).
• 180 mins Runtime: A high-capacity battery provides up to three hours of continuous cleaning.
• Upgraded Brush System: Features four planes of movement to maintain close contact with the floor for effective cleaning on uneven surfaces.

3. Hvad er der i æsken

Sørg for, at alle komponenter er til stede ved udpakning:

• Q7 Robotstøvsuger
• Auto-tøm Dock Pure
• Opladningsdock
• Vandtank
• Water Tank Filter Pack
• Moppeklud
• Strømkabel
• Skruetrækker
• Brugermanual

4. Opsætningsvejledning

4.1 Første placering og opladning

1. Place the Auto-Empty Dock Pure against a wall on a hard, level surface. Ensure there is adequate space around the dock (at least 0.5m on both sides and 1.5m in front).
2. Tilslut strømkablet til docken, og sæt det i en stikkontakt.
3. Place the Q7 robot vacuum onto the charging contacts of the dock. Allow it to fully charge before its first use.

4.2 Appforbindelse og -tilknytning

1. Download the roborock app from your smartphone's app store.
2. Follow the in-app instructions to connect your Q7+ to your home Wi-Fi network.
3. Initiate a "Quick Map" or full cleaning cycle through the app. The robot will use its PreciSense LiDAR to create an accurate map of your home.
4. Once the map is generated, use the 3D Mapping feature in the app to customize rooms, add furniture, and define No-Go Zones or Invisible Walls as needed.

Image: A smartphone screen displaying the roborock app with a detailed 3D map of a home, highlighting various rooms and customization options.

5. Betjeningsvejledning

5.1 Rengøringstilstande

The Q7+ offers various cleaning modes accessible via the roborock app:

• Kun støvsuger: Til fjernelse af tørt snavs.
• Kun moppe: For wet cleaning (ensure water tank is filled).
• Støvsuger og mopper: Samtidig tør- og vådrengøring.
• Skik: Adjust suction power and water flow for specific rooms or zones.

5.2 Planlægning og rutiner

Set up cleaning schedules and routines in the app to automate cleaning tasks. You can specify times, days, and areas to be cleaned.

5.3 Stemmekontrol

Integrate your Q7+ with Amazon Alexa or Google Home for convenient voice commands. Refer to the app for specific voice command phrases.

5.4 3D Mapping and Zone Management

Utilize the 3D map in the app to define specific cleaning zones, set No-Go Zones (areas the robot should avoid), and Invisible Walls (virtual barriers).

Image: A smartphone screen displaying various advanced app control options for the roborock Q7+, including routines, scheduling, no-go zones, and multi-level mapping.

6. Vedligeholdelse

6.1 Auto-Empty Dock Pure

The 2.5L self-sealing dust bag in the Auto-Empty Dock Pure holds up to 7 weeks of debris. Replace the bag when the indicator light on the dock signals it is full.

Image: A hand removing a full, self-sealing dust bag from the roborock Auto-Empty Dock Pure.

6.2 Robotstøvbeholder og filter

Periodically remove and clean the robot's internal dustbin and washable filter. This ensures optimal suction performance.

6.3 Hovedbørste og sidebørste

Regularly check the main brush and side brush for tangled hair or debris. Use the provided cleaning tool to remove any obstructions.

6.4 moppeklud

Remove and wash the mop cloth after each mopping session to prevent odors and maintain cleaning effectiveness.

7. Fejlfinding

7.1 Robot sidder fast

If the robot frequently gets stuck, ensure the cleaning area is free of loose cables, small objects, or thick rugs that might impede its movement. Utilize No-Go Zones in the app for persistent problem areas.

7.2 Poor Suction Performance

Check the robot's dustbin and filter for fullness or blockages. Clean or replace the filter as necessary. Inspect the main brush for tangled hair or debris.

7.3 Mopping Issues

Ensure the water tank is filled and correctly installed. Clean the mop cloth if it appears dirty or clogged. Verify that the water flow setting in the app is appropriate for your floor type.

7.4 Problemer med app-forbindelse

Confirm your home Wi-Fi is stable and the robot is within range. Restart your router, the robot, and the app if connectivity issues persist.

8. Specifikationer

9. Garanti og support

The roborock Q7+ typically comes with a 12-month manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official roborock webhjemmeside eller kontakt deres kundeservice direkte.

10. Officielle produktvideoer