Valeton Tone City Mickey Distortion Pedal Brugermanual

1. Introduktion

The Valeton Tone City Mickey Distortion is a compact guitar effect pedal designed to deliver classic "rodent" style distortion tones. This manual provides essential information for the proper setup, operation, and maintenance of your pedal.

Please read this manual thoroughly before using the pedal to ensure optimal performance and longevity.

2. Nøglefunktioner

• Compact, mini pedal format.
• Classic "rodent" style distortion.
• Three essential controls: Volume, Tone, and Gain.
• Mod switch for enhanced overdrive and saturation.
• True bypass switching for signal integrity.
• Holdbart metal casing.

3. Opsætning

3.1 Strømforsyning

The Mickey Distortion pedal requires a 9V DC strømadapter med en negative center polarity. The pedal does not support 9V battery operation. Using an incorrect power supply may damage the unit and void the warranty.

Vigtig: Power supply is not included. Ensure your power adapter meets the specified requirements.

3.2 Tilslutning af pedalen

1. Tilslut din guitar til IN stikket på højre side af pedalen ved hjælp af et standard 6,5 mm instrumentkabel.
2. Tilslut UD stikket på venstre side af pedalen til din ampliferens indgang ved hjælp af et andet standard 6,5 mm instrumentkabel.
3. Connect the 9V DC power adapter to the 9V power input jack located at the top of the pedal.
4. Sørg for, at alle forbindelser er sikre, før du tænder for din amplivligere.

Billede 1: Top-down view of the Mickey Distortion pedal, illustrating the input (IN), output (OUT), power jack (9V), and control knobs (VOL, TONE, GAIN) along with the MOD switch and footswitch.

4. Betjening

4.1 kontroller overview

Billede 2: Detaljeret view of the pedal's controls, including the VOL, TONE, and GAIN knobs, and the MOD toggle switch.

• VOL (lydstyrke): Justerer pedalens samlede udgangsniveau.
• TONE: Controls the tonal character, ranging from smooth and dark to bright and cutting. Lower settings provide a smoother lead tone, while higher settings offer more presence.
• GEVINST: Determines the amount of distortion. Turn clockwise for more saturation and sustain.
• MOD Switch: A toggle switch that pushes the pedal further into overdrive, providing a bigger, fatter, and more saturated tone, ideal for lead parts.
• Fodkontakt: Engages or bypasses the effect. When engaged, the LED indicator will illuminate.

4.2 Grundlæggende brug

1. Ensure the pedal is properly connected and powered on.
2. Press the footswitch to engage the effect. The LED will light up.
3. Start with the VOL, TONE, and GAIN knobs at their mid-point positions.
4. Adjust the GAIN knob to achieve your desired level of distortion, from a subtle crunch to high-gain saturation.
5. Use the TONE knob to fine-tune the brightness and character of the distorted sound.
6. Adjust the VOL knob to balance the effect's output with your amplifier's clean signal.
7. Experiment with the MOD switch to explore additional tonal variations, especially for lead playing.

5. Vedligeholdelse

• Hold pedalen ren ved at tørre den af ​​med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
• Opbevar pedalen et tørt sted, væk fra ekstreme temperaturer og direkte sollys.
• Afbryd strømforsyningen, når pedalen ikke er i brug i længere perioder.
• Regularly check all cable connections for wear and tear.

6. Fejlfinding

7. Specifikationer

8. Garantioplysninger

Valeton products are designed and manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Valeton webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

9. Support

If you encounter any issues not covered in this manual or require further assistance, please contact Valeton customer support through their official webwebstedet eller den forhandler, hvorfra du købte produktet.

For mere information og produktopdateringer, besøg: www.valeton.net