Indledning
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PAL Lighting PAL Mini 12V Cool White LED Light with a 66-foot cord. Please read this manual thoroughly before installation and keep it for future reference.
Sikkerhedsoplysninger
ADVARSEL: Always disconnect power before installing or servicing this product. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
- Ensure the power supply matches the product's voltage requirements (12VAC/12VDC).
- Modificer ikke produktet eller dets komponenter.
- Hold børn og kæledyr væk fra installationsområdet.
- Inspect the cord for any damage before installation. Do not use if damaged.
Pakkens indhold
- 1 x PAL Mini 12V Cool White LED Light (Model: 41-PCL20W20)
- 1 x 66-foot 2-wire cord (integrated)
- Brugervejledning (dette dokument)
Image: The PAL Mini 12V Cool White LED Light, featuring its compact LED head and a long, coiled 66-foot black two-wire cord. The cord is neatly bundled, secured with a white tie, and shows the exposed wire ends for connection.
Opsætning og installation
This section outlines the general steps for installing your PAL Mini LED Light. Specific installation methods may vary based on your application (e.g., pool, spa, landscape). Consult a professional if unsure.
- Strømafbrydelse: Ensure all power to the installation area is turned off at the circuit breaker before beginning any work.
- Monteringssted: Choose a suitable location for the light fixture. Ensure the 66-foot cord is sufficient to reach the power source without tension.
- Ledningsføring: Connect the two-wire cord from the PAL Mini light to a compatible 12VAC or 12VDC power supply. Ensure correct polarity if using DC power. Use appropriate waterproof connectors for outdoor or wet environments.
- Sikker armatur: Secure the light fixture in its intended position according to the specific mounting instructions for your application.
- Kabelstyring: Route the 66-foot cord safely, avoiding sharp edges, pinch points, or areas where it could be damaged. Secure it as needed.
- Strømtilslutning: Once all connections are secure and the light is properly mounted, restore power to the circuit.
- Prøve: Verify the light functions correctly.
Betjeningsvejledning
The PAL Mini LED Light operates by receiving power from a 12VAC or 12VDC source. It is a simple on/off light.
- Tænder: Apply 12VAC or 12VDC power to the connected wires. The light will illuminate.
- Slukker: Disconnect the 12VAC or 12VDC power supply. The light will turn off.
- Kontrollere: This light is typically controlled by an external switch, timer, or automation system connected to its power source.
Opretholdelse
The PAL Mini LED Light is designed for low maintenance. Regular inspection is recommended.
- Rensning: Periodically clean the lens of the light with a soft cloth and mild, non-abrasive cleaner to ensure optimal light output. Do not use harsh chemicals.
- Ledningsinspektion: Regularly inspect the entire length of the 66-foot cord for any signs of wear, cuts, or damage. If damage is found, disconnect power immediately and replace the unit.
- Forbindelser: Sørg for, at alle elektriske forbindelser forbliver sikre og fri for korrosion.
- Vinterisering (hvis relevant): If used in a pool or spa, follow standard winterization procedures for your specific application, which may include removing the light or ensuring it is submerged.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning; Forkert ledningsføring; Beskadiget enhed. | Check power source and circuit breaker; Verify wiring connections; Inspect for damage and replace if necessary. |
| Lyse flimrer. | Loose connection; Insufficient power. | Check and secure all wiring connections; Ensure power supply meets specifications. |
| Lysudgangen er svag. | Dirty lens; Voltage drop over long cable run; Faulty LED. | Clean the lens; Verify voltage at the light fixture; Contact support if LED is faulty. |
If troubleshooting steps do not resolve the issue, contact PAL Lighting customer support.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 41-PCL20W20 |
| Lyskildetype | LED |
| Lys farve | Cool White |
| Voltage | 12 VAC / 12VDC |
| Ledningslængde | 66 fod |
| Trådtype | 2-wire |
| Materiale | Copper (internal wiring/components) |
| Varens vægt | 2.3 pund |
| Produktdimensioner | 7.4 x 7.3 x 2.6 tommer (emballage/samlet) |
| Fabrikant | PAL PRODUCTS, INC. |
Garanti og support
For warranty information and technical support, please contact PAL Lighting directly. Keep your proof of purchase for warranty claims.
Fabrikant: PAL PRODUCTS, INC.
Refer to the official PAL Lighting website or your purchase documentation for the most current contact information and warranty details.
