MARATHON Round Atomic Alarm Clock (Graphite Gray) User Manual

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your MARATHON Round Atomic Alarm Clock. This device automatically synchronizes with the NIST radio signal for accurate timekeeping and features a digital display for time, date, day, and indoor temperature.

Figur 1: MARATHON Round Atomic Alarm Clock, Graphite Gray.

Pakkens indhold

• MARATHON Round Atomic Alarm Clock (Graphite Gray)
• 2 x AAA batterier
• Instruktionsmanual (dette dokument)

Produkt overview

The MARATHON Round Atomic Alarm Clock is designed for ease of use and precise timekeeping. It features a clear digital display and intuitive controls.

Figur 2: Bag view of the clock with controls.

Nøglefunktioner:

• Atomic Time Synchronization: Automatically sets and adjusts time via NIST radio signal (North America only).
• Digital skærm: Shows time (12/24-hour), date, day of the week, and indoor temperature.
• Push-Button Backlight: Provides a 5-second illumination for viewi svagt lys.
• Alarm with Snooze: Features an 8-minute snooze function.
• Eight Time Zones: Selectable time zones for North America (Pacific, Mountain, Central, Eastern, Atlantic, Newfoundland, Alaska, Hawaii).
• Temperaturvisning: Switchable between Celsius (°C) and Fahrenheit (°F).

Opsætning

1. Batteriinstallation

1. Locate the battery compartment on the back of the clock (refer to Figure 2).
2. Åbn batterirummets dæksel.
3. Isæt de to AAA-batterier, og sørg for at polerne vender korrekt (+ og -).
4. Luk batterirummets dæksel forsvarligt.

Upon battery installation, the clock will automatically begin searching for the atomic time signal.

2. Atomic Time Synchronization

• Placer uret i nærheden af et vindue for optimal signalmodtagelse.
• The clock will attempt to synchronize with the NIST radio signal. This process may take several minutes to a few hours, depending on your location and environmental conditions.
• A signal strength indicator (often a tower icon) on the display will show the reception status. A solid icon indicates successful synchronization.
• If the clock does not synchronize after several hours, try relocating it to a different position or window.

3. Indstilling af tidszone

Once synchronized, the clock will display the default time zone. To adjust:

1. Locate the "TIME ZONE" button on the back of the clock (refer to Figure 2).
2. Press the "TIME ZONE" button repeatedly to cycle through the available North American time zones: Pacific (P), Mountain (M), Central (C), Eastern (E), Atlantic (A), Newfoundland (N), Alaska (L), and Hawaii (H).
3. Stop pressing when your desired time zone is displayed. The clock will automatically adjust the time.

4. Setting 12/24-Hour Format and Temperature Unit

These settings are typically adjusted using dedicated buttons or a combination of buttons on the back of the clock.

• Tidsformat: Look for a button labeled "12/24H" or similar. Press it to toggle between 12-hour (with AM/PM indicator) and 24-hour formats.
• Temperaturenhed: Look for a button labeled "°C/°F" or similar. Press it to switch the indoor temperature display between Celsius and Fahrenheit.

Betjeningsvejledning

1. Using the Backlight

• The clock features a push-button backlight for temporary illumination.
• Press the large button located on the top of the clock (often labeled "SNOOZE/LIGHT").
• The display will illuminate for approximately 5 seconds.

2. Indstilling og brug af alarmen

Sådan indstilles alarmtidspunktet:

1. Locate the "ALARM SET" button on the back of the clock. Press and hold it until the alarm time begins to flash.
2. Use the "+" and "-" buttons (or similar adjustment buttons) to set the desired alarm hour.
3. Press "ALARM SET" again to confirm the hour and move to setting the minutes.
4. Use the "+" and "-" buttons to set the desired alarm minutes.
5. Press "ALARM SET" one last time to confirm and exit alarm setting mode.

For at aktivere/deaktivere alarmen:

• Locate the "ALARM ON/OFF" switch or button, typically on the side or back of the clock (refer to Figure 2).
• Slide the switch to "ON" or press the button to activate the alarm. An alarm icon will appear on the display.
• Slide the switch to "OFF" or press the button again to deactivate the alarm. The alarm icon will disappear.

3. Snooze-funktion

• When the alarm sounds, press the large "SNOOZE/LIGHT" button on the top of the clock.
• Alarmen stopper midlertidigt og lyder igen efter cirka 8 minutter.
• To turn off the alarm completely, slide the "ALARM ON/OFF" switch to "OFF" or press any other button (consult specific model instructions if this varies).

Opretholdelse

Udskiftning af batteri

• When the display dims or functions become erratic, it is time to replace the batteries.
• Åbn batterirummet på bagsiden af ​​uret.
• Remove the old AAA batteries and dispose of them properly according to local regulations.
• Isæt to nye AAA-batterier, og sørg for at polariteten vender korrekt.
• Close the battery compartment. The clock will restart the atomic synchronization process.

Rensning

• Tør uret af med en blød, tør klud.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the casing eller display.

Fejlfinding

Specifikationer

Figur 3: Produktdimensioner.

Garanti og support

MARATHON products are manufactured with quality and precision. For specific warranty information, please refer to the documentation included with your purchase or visit the official MARATHON website. For technical support or inquiries, please contact MARATHON customer service through their official channels.

Du kan finde mere information og support på MARATHON Brand Store.