Indledning
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Sikkerhedsinstruktioner
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Udsæt ikke enheden for regn eller fugt for at forhindre brand eller elektrisk stød.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Forsøg ikke selv at udføre service på enheden. Overlad al service til kvalificeret servicepersonale.
- Opbevares utilgængeligt for børn.
Pakkens indhold
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Strømkabler
- RCA kabler
- Modvægte
- Slipmats
- Brugermanual
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Opsætning
1. Udpakning og placering
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Billede: En vinklet view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Connecting Audio Cables
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Strømtilslutning
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Betjeningsvejledning
1. Tænd og sluk
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Billede: Overhead view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Afspilning af en plade
- Læg en plade på fadet.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Tryk på START/STOP knappen for at starte tallerkenrotation.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The BAGSIDE button allows for reverse playback of the record.
Opretholdelse
1. Rengøring af drejeskiven
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Pleje af pennen
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Strømkabel ikke tilsluttet; stikkontakt defekt | Kontroller strømkablets forbindelse; prøv en anden stikkontakt |
| Ingen lyd | RCA-kabler ikke tilsluttet; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Brummende støj | Ground wire not connected; Interference | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Forkert afspilningshastighed | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Specifikationer
- Mærke: Reloop
- Model: RP-7000 MK2
- Forbindelse teknologi: Kablet
- Særlige funktioner: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- Materiale: Plast
- Varens vægt: 4.5 Kilograms (per turntable)
- Farve: Deep black or classic silver metallic
- Kompatible enheder: Højttaler, hovedtelefon
Garanti og support
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis til garantikrav.
For yderligere hjælp, besøg Reloop Store on Amazon.
