SCULPFUN S30 5.5W lasergravør og -skærer brugermanual

1. Vigtige sikkerhedsoplysninger

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• Lasersikkerhed: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• Øjenbeskyttelse: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• Ventilation: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• Materialesikkerhed: Only engrave or cut materials specified as safe for laser processing. Avoid highly reflective, flammable, or unknown materials.
• Brandfare: The laser can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Børn og kæledyr: Keep children and pets away from the operating area. This device is not a toy.
• Nødstop: Gør dig bekendt med placeringen og betjeningen af ​​nødstopknappen.

2. Pakkens indhold

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• Strømadapter og kabel
• USB kabel
• Laser sikkerhedsbriller
• Tool Kit (wrenches, hex keys)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• Brugervejledning (dette dokument)

3. Opsætningsvejledning

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. Udpak komponenter: Fjern forsigtigt alle dele fra emballagen, og kontroller dem med pakkens indholdsliste.
2. Saml ramme: Tilslut aluminiumsproffenfiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Monter lasermodul: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. Tilslut ledninger: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. Strømtilslutning: Tilslut strømadapteren til gravøren og derefter til en passende stikkontakt.
7. Software installation: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. Betjeningsvejledning

Dette afsnit giver en generel overview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

Image: Various examples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. Forbered arbejdsområde: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. Tilslut til computer: Connect the engraver to your computer via the USB cable.
3. Tænd: Turn on the power switch on the engraver.
4. Start software: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. Belastningsdesign: Import your desired image or design file ind i softwaren.
6. Juster indstillinger: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. Fokuslaser: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. Positionsmateriale: Use the software to jog the laser head and confirm the engraving area on your material.
9. Start drift: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. Sluk: Once complete, power off the engraver and disconnect it from the computer.

5. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• Ren linse: Rengør laserlinsen med jævne mellemrum med en blød, fnugfri klud og linserengøringsmiddel for at bevare laserens kraft og præcision.
• Clean Rails and Wheels: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• Smør bevægelige dele: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• Tjek remme: Inspect the timing belts for tension and wear. Adjust or replace if necessary.
• Lasermodulets levetid: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. Fejlfinding

If you encounter issues with your SCULPFUN S30, refer to the following common problems and solutions:

• Ingen laseroutput:
  • Check if the laser module is properly connected and powered.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Verify laser power settings in the software.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Maskinen opretter ikke forbindelse til computeren:
  • Bekræft USB-kabelforbindelsen.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• Unøjagtig gravering/udskæring:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. Specifikationer

8. Garanti og support

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN webwebsted.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN webwebsted: www.sculpfun.com