Moen MotionSense Wave berøringsfri køkkenarmatur med nedtræk, brugsanvisning

1. Produktet er slutview

The Moen MotionSense Wave Touchless Pulldown Kitchen Faucet combines modern design with advanced functionality for a convenient kitchen experience. This faucet features hands-free activation, a pull-down spray wand with Power Clean technology, and a Spot Resist Stainless finish.

Nøglefunktioner:

• MotionSense Wave Touchless Activation: Allows for hands-free operation by simply waving your hand.
• Pulldown Spray Wand: Provides flexibility and extended reach for various tasks.
• Power Clean Spray-teknologi: Delivers a more concentrated spray for faster cleaning.
• Reflessystem: Ensures smooth operation and secure docking of the spray wand.
• Pletbestandig rustfri finish: Resists fingerprints and water spots, simplifying cleaning.
• Single Handle Design: For easy temperature and flow control.
• Single Hole Mounting: Designet til ligetil installation.

Image 1.1: Moen MotionSense Wave Touchless Pulldown Kitchen Faucet with deck plate and soap dispenser.

2. Sikkerhedsoplysninger

Please read all instructions carefully before installation and use. Failure to follow these instructions could result in property damage or personal injury.

• Sluk altid for hovedvandforsyningen, inden du påbegynder installation eller vedligeholdelse.
• Sørg for, at alle forbindelser er sikre for at forhindre lækager.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• The faucet requires batteries for touchless operation. Ensure batteries are installed correctly and replaced when necessary to maintain functionality.
• Keep the sensor area clear of obstructions to prevent unintended activation.

3. Opsætning og installation

This faucet is designed for single-hole deck mount installation. It can be installed with or without the included deck plate.

Nødvendige værktøjer (ikke inkluderet):

• Justerbar skruenøgle
• Stjerneskruetrækker
• VVS-kit eller silikoneforsegling
• Lommelygte
• Spand
• Håndklæder

Installationstrin:

1. Klargør vasken: Turn off the water supply at the main shut-off valves. Clear the area under the sink. Remove any existing faucet.
2. Installer dækplade (valgfrit): If using the deck plate, apply plumber's putty or silicone sealant around the underside edge of the deck plate and place it over the sink holes.
3. Monter vandhanen: Insert the faucet body through the center hole in the sink (and deck plate, if used). From underneath the sink, secure the faucet with the provided mounting hardware (washer and mounting nut). Tighten securely.
4. Tilslut vandforsyningsledninger: Connect the hot and cold water supply lines from the faucet to your home's hot and cold water valves. Ensure connections are tight but do not overtighten.
5. Installer sæbedispenser: Insert the soap dispenser through its designated hole. Secure from underneath with the provided nut. Fill with liquid soap.
6. Installer batteripakke: The touchless feature requires power. Install the specified batteries into the battery pack. Secure the battery pack in an accessible location under the sink, away from direct water exposure.
7. Connect Sensor Cable: Connect the sensor cable from the faucet to the control box/battery pack.
8. Test for lækager: Slowly turn on the main water supply. Check all connections for leaks. Run the faucet (both manual and touchless) to ensure proper operation and flush out any debris.

Image 3.1: Faucet with pull-down spray wand extended, illustrating hose flexibility.

4. Betjeningsvejledning

The Moen MotionSense Wave faucet offers both touchless and manual operation.

4.1 Touchless Activation (MotionSense Wave)

• To activate water flow, wave your hand approximately 1-2 inches in front of the sensor located on the side of the faucet base.
• Wave your hand again to turn off the water.
• The water temperature for touchless activation is set by the position of the manual handle. Adjust the handle to your desired temperature before using the touchless feature.
• The touchless feature will automatically shut off after a period of inactivity to conserve water and battery life.

4.2 Manuel betjening

• To operate manually, use the single handle on the side of the faucet.
• Lift the handle to turn on the water and control flow rate.
• Flyt håndtaget til venstre for varmt vand og til højre for koldt vand.
• Push the handle down to turn off the water.

4.3 Pulldown Spray Wand

• Gently pull down the spray wand from the faucet spout.
• Press the button on the spray wand to switch between stream and Power Clean spray modes.
• When finished, guide the spray wand back into the spout. The Reflex system ensures it docks securely.

Image 4.1: Demonstrating manual operation and water flow from the faucet.

5. Vedligeholdelse

Regular maintenance will ensure the longevity and optimal performance of your faucet.

5.1 Rengøring af vandhanen

• Spot Resist Stainless-finishen er designet til at modstå fingeraftryk og vandpletter.
• Rengør vandhanen regelmæssigt med en blød, tør klud.amp klud og mild sæbe.
• Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• For stubborn water spots, a solution of equal parts white vinegar and water can be used, followed by rinsing and drying.

5.2 Udskiftning af batteri

• The touchless feature is powered by batteries located in a battery pack under the sink.
• When batteries are low, the faucet may exhibit reduced sensor responsiveness or a chirping sound.
• To replace batteries, locate the battery pack, open it, and replace all old batteries with new ones of the specified type (typically AA or D batteries, refer to the battery pack for exact type).
• Sørg for korrekt polaritet, når du isætter nye batterier.
• After replacing batteries, the system may need a moment to reset.

6. Fejlfinding

Hvis du støder på problemer med din vandhane, kan du se følgende almindelige problemer og løsninger:

• No Water Flow (Touchless):
  • Check if the manual handle is in the OFF position.
  • Ensure the water supply valves are fully open.
  • Verify that the battery pack has fresh batteries and is properly connected.
  • Clean the sensor area to ensure no obstructions.
• No Water Flow (Manual):
  • Check if the main water supply is on.
  • Ensure the hot and cold water supply lines are not kinked or blocked.
• Svagt vandtryk:
  • Check if the aerator is clogged. Unscrew the aerator from the spray wand and clean any debris.
  • Ensure water supply valves are fully open.
• Flickering or Unintended Activation:
  • Ensure the sensor area is clean and free from reflective surfaces or objects.
  • Avoid placing objects too close to the sensor.
• Kvidrende lyd:
  • This typically indicates low batteries. Replace the batteries in the battery pack.
• Spray Wand Does Not Retract Fully:
  • Check for obstructions under the sink that might be interfering with the hose and weight.
  • Ensure the weight on the hose is positioned correctly.

If problems persist after troubleshooting, contact Moen customer support.

7. Specifikationer

8. Garanti og support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Moen webwebsted. Gem din købsbevis til garantikrav.

Kontaktoplysninger:

• Producent: Moen
• For specific support, visit www.moen.com eller kontakt deres kundeservicelinje.