1. Introduktion
Thank you for choosing VIBE Audio Pulse 4" 10cm 2-Way Coaxial Car Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new speakers. Please read it thoroughly before installation and retain it for future reference.
2. Sikkerhedsoplysninger
- Frakobl altid køretøjets batteri, før du påbegynder nogen form for elektrisk installation.
- Sørg for, at alle ledninger er korrekt isoleret for at forhindre kortslutninger.
- Kontakt en professionel installatør af bilstereo, hvis du er usikker på nogen del af installationsprocessen.
- Undgå at installere højttalere på steder, der blokerer køretøjets betjening eller sikkerhedsfunktioner.
- Udsæt ikke højttalerne for overdreven fugtighed eller ekstreme temperaturer.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 2 x VIBE Audio Pulse 4" Coaxial Speakers
- 1 x Brugsanvisning (dette dokument)
- Mounting hardware (screws, clips) - (Note: Specific hardware details may vary, refer to packaging)
- Højttalergitre
Figur 3.1: Retail packaging for VIBE Audio Pulse 4" coaxial speakers, showing a pair of speakers with grilles.
4. Produktfunktioner
- 4" (100mm) 2-way high efficiency coaxial speaker design.
- Peak Power Output: 120 Watts per speaker (240W total for pair).
- RMS Power Output: 40 Watts per speaker.
- Frekvensrespons: 100Hz – 20kHz.
- Sensitivity: 83dB.
- Impedans: 4 Ohm.
- Mounting Diameter: 3.7" (95mm).
- Mounting Depth: 1.7" (44mm).
- Integrated grilles for protection.
Figur 4.1: Front view of the VIBE Audio Pulse speaker, showcasing the protective grille and VIBE branding.
Figur 4.2: Front view of the VIBE Audio Pulse speaker without the grille, showing the cone and tweeter assembly.
5. Opsætning og installation
Proper installation is crucial for optimal performance and longevity of your speakers. Follow these general steps:
- Forberedelse: Disconnect the vehicle's negative battery terminal. Identify suitable mounting locations in your vehicle that match the speaker's 4" size and 1.7" (44mm) mounting depth.
- Montering: If replacing existing speakers, carefully remove them. If creating new openings, use a template to mark and cut the mounting holes, ensuring the 3.7" (95mm) mounting diameter is accommodated. Secure the speakers using the provided mounting hardware.
- Ledningsføring: Connect the speaker wires from your head unit or amplifier to the speaker terminals. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Incorrect polarity can lead to poor sound quality.
- Test: Before reassembling interior panels, reconnect the battery and test the speakers at a low volume to ensure they are functioning correctly.
- Afsluttende samling: Once tested, secure any grilles and reassemble vehicle interior panels.
Figur 5.1: Bag view of the VIBE Audio Pulse speaker, highlighting the wiring terminals for connection.
Figur 5.2: Vinklet bagside view of the VIBE Audio Pulse speaker, showing the magnet structure and product label with model number and impedance.
6. Betjening
Once installed, your VIBE Audio Pulse speakers will operate as part of your vehicle's audio system. Control playback, volume, and audio settings through your car's head unit or amplifier. These speakers are designed for a balanced audio experience within their specified power handling capabilities.
- Lydstyrkekontrol: Adjust the volume gradually. Avoid prolonged listening at excessively high volumes to prevent speaker damage and hearing loss.
- Lydindstillinger: Utilize your head unit's equalizer and balance/fader controls to fine-tune the sound to your preference.
7. Vedligeholdelse
Your VIBE Audio Pulse speakers require minimal maintenance:
- Rensning: Tør forsigtigt højttalergitrene og -rammerne af med en blød, tør klud for at fjerne støv. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Inspektion: Kontroller jævnligt ledningsforbindelserne for at sikre, at de forbliver fastgjorte.
- Miljøbeskyttelse: While designed for automotive use, avoid direct exposure to water or extreme heat/cold, which can degrade speaker components over time.
8. Fejlfinding
Hvis du støder på problemer med dine højttalere, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra højttalerne | Loose wiring connection; incorrect polarity; head unit/amplifier issue; speaker damage. | Check all wiring connections for security and correct polarity. Verify head unit/amplifier is powered on and functioning. If problem persists, consult a professional. |
| Forvrænget lyd | Volume too high; incorrect audio settings (e.g., bass boost); damaged speaker; insufficient power from head unit/amplivligere. | Reduce volume. Adjust equalizer settings on head unit. Ensure amplifier gain is set correctly. If distortion occurs at moderate volumes, speaker may be damaged or underpowered. |
| En højttaler virker ikke | Loose connection to that specific speaker; fader/balance settings incorrect; damaged speaker. | Check wiring for the non-working speaker. Adjust fader/balance settings on your head unit. |
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | PULSE4-V0 |
| Højttaler type | 2-vejs koaksial |
| Højttaler størrelse | 4 tommer (100 mm) |
| Spidseffekt | 120 watt (pr. højttaler) |
| RMS udgangseffekt | 40 watt (pr. højttaler) |
| Frekvensrespons | 100Hz - 20kHz |
| Følsomhed | 83 dB |
| Impedans | 4 Ohm |
| Monteringsdiameter | 3.7 tommer (95 mm) |
| Monteringsdybde | 1.7 tommer (44 mm) |
| Produktmål (D x B x H) | 9.5D x 9.5B x 4.4H Centimeter |
| Varens vægt | 400 gram |
| Inkluderede komponenter | Speakers, Manual, Grilles |
| Anbefalet brug | Bilstereo |
10. Garanti og support
VIBE Audio products are manufactured to high standards. For warranty information and technical support, please refer to the official VIBE Audio webwebstedet eller kontakt din autoriserede forhandler. Gem din købsbevis i tilfælde af garantikrav.
For yderligere hjælp, besøg: www.vibeaudio.co.uk
