Brio CLBL720SCBLK Moderna Selvrensende Vandkøler med Bundbelastning Brugermanual

Indledning

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Brio Moderna Self-Cleaning Bottom Load Water Cooler. Please read this manual thoroughly before use and retain it for future reference.

Vigtige sikkerhedsoplysninger

• Tag altid stikket ud af dispenseren, inden du rengør eller udfører vedligeholdelse.
• Do not operate the dispenser without water in the bottle.
• Ensure the dispenser is placed on a level surface.
• Hold dispenseren væk fra direkte sollys og varmekilder.
• Varmtvandsdispenseren har en børnesikring. Aktiver altid denne lås, når den ikke er i brug, især i husstande med børn.
• Allow the unit to stand upright for at least 24 hours before plugging it in to allow compressor oils to settle.

Opsætningsinstruktioner

1. Udpakning og placering

• Carefully remove the water cooler from its packaging.
• Place the dispenser on a firm, level surface in a cool, dry location away from direct sunlight and heat. Ensure there is adequate ventilation around the unit.
• Allow the unit to stand upright for a minimum of 24 hours before plugging it into an electrical outlet. This allows the compressor oil to settle, preventing potential damage.

2. Installing the Water Bottle

This bottom-loading dispenser accommodates standard 3- or 5-gallon water bottles.

1. Åbn dispenserens nederste kabinetdør.
2. Remove the cap from a new water bottle.
3. Insert the probe assembly into the bottle opening. Ensure the probe is fully inserted and the tube extends to the bottom of the bottle.
4. Slide the water bottle into the cabinet. Ensure the probe tube is not kinked or obstructed.
5. Luk skabslågen forsvarligt.

Figure 1: Loading a 5-gallon water bottle into the bottom compartment.

Figure 2: Detail of the bottom-load mechanism with the water bottle in place.

3. Første opstart

• After 24 hours of standing, plug the dispenser into a grounded electrical outlet.
• Allow approximately 15-30 minutes for the hot and cold water to reach their optimal temperatures.
• Dispense a few cups of water from each tap to flush the system and ensure proper water flow.

Betjeningsvejledning

1. Vandudlevering

The Brio Moderna dispenser offers three temperature options: Hot, Cold, and Room Temperature.

• Koldt vand: Press the blue snowflake icon button.
• Rumtemperatur vand: Press the wavy line icon button.
• Varmt vand: This dispenser features a child safety lock for hot water. To dispense hot water, simultaneously press and hold the safety lock button (padlock icon) and then press the red steam icon button. Release both buttons once dispensing begins.

Figure 3: Advanced LED Interface with touch-sensitive controls and indicator lights.

2. Adjustable Temperature Settings

You can customize the hot and cold water dispensing temperatures.

• Use the arrow buttons on the LED interface to adjust the desired temperature for hot and cold water. Refer to the display for current settings.
• The hot water can be set up to approximately 191°F, and cold water down to approximately 39°F.

Figure 4: Customizable hot and cold temperature settings.

3. Indicator Lights and Digital Clock

• The LED display includes a digital clock for convenience.
• Indicator lights will illuminate to show when heating (red) or chilling (blue) is active.
• An "empty bottle" indicator light will notify you when the water bottle needs replacement.
• A night light feature ensures visibility for dispensing in low-light conditions.

Figure 5: Night light feature for low-light dispensing.

Opretholdelse

1. Self-Cleaning Ozone Function

The dispenser features an internal self-cleaning system using ozone to reduce biofilm buildup and impurities in the reservoirs and tubing.

1. Ensure a full water bottle is installed.
2. Press the dedicated self-cleaning button (often indicated by an O3 icon) on the control panel.
3. The self-cleaning process will run for approximately 90 minutes. An indicator light will show when cleaning is underway.
4. Ozone dissipates naturally, leaving no chemical taste or residue.

Figure 6: Illustration of the self-cleaning ozone system.

2. Regelmæssig rengøring

• Ydre: Tør de udvendige overflader af med en blød, damp klæde. Undgå slibende rengøringsmidler.
• Drypbakke: Drypbakken bør tømmes og rengøres regelmæssigt for at forhindre overløb og bakterievækst. Fjern bakken, vask den med mild sæbe og vand, skyl grundigt, og sæt den tilbage på plads.
• Dispensing Nozzles: Periodically wipe the dispensing nozzles with a clean cloth.

Fejlfinding

Inden du kontakter kundeservice, bedes du venligst vedrview følgende almindelige problemer og løsninger.

Specifikationer

Figure 7: Product dimensions and certifications.

Garanti og support

Garantioplysninger

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the Brio official webhjemmeside for detaljerede garantivilkår.

Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Brio customer support. Contact details can typically be found on the manufacturer's website or in the included care guide.

Inkluderede komponenter: Bottom Loading Water Cooler Dispenser, User Manual, Care Guide.