1. Introduktion og overview
This manual provides essential information for the safe and efficient operation of your INGCO FCLI2001A 20V Fast Intelligent Charger. Please read these instructions carefully before use and retain them for future reference.
The INGCO FCLI2001A is a 20V fast intelligent charger designed exclusively for INGCO 2.0Ah and 4.0Ah series batteries. It features advanced technology to ensure quick and safe charging, protecting your batteries from common issues.
En detaljeret view of the INGCO FCLI2001A 20V Fast Intelligent Charger, showcasing its compact design and LED indicator panel.
2. Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.
- Kun indendørs brug: Denne oplader er designet til indendørs brug under tørre forhold. Udsæt den ikke for regn eller våde forhold.
- Korrekt bindtage: Sørg for, at strømforsyningen voltage matcher den klassificering, der er angivet på opladeren.
- Undgå skader: Do not operate the charger if the cord or plug is damaged. If the charger has been dropped or damaged, have it inspected by a qualified service person.
- Ventilation: Sørg for tilstrækkelig ventilation omkring opladeren under drift. Opladeren må ikke tildækkes.
- Batterikompatibilitet: Only charge INGCO 20V Li-ion batteries with this charger. Attempting to charge other types of batteries may cause personal injury and damage.
- Hold dig væk fra børn: Store the charger and batteries out of reach of children.
- Afbryd strømmen: Always disconnect the charger from the power outlet before cleaning or when not in use.
- Ingen demontering: Forsøg ikke at skille opladeren ad. Overlad al service til kvalificeret servicepersonale.
3. Produktfunktioner
The INGCO FCLI2001A charger incorporates several features designed for optimal battery charging and protection:
- Hurtig opladning: Capable of charging 2.0Ah batteries in 1 hour and 4.0Ah batteries in 2 hours.
- Intelligent opladning: Monitors battery status for efficient and safe charging.
- Ingen hukommelseseffekt: Allows batteries to be charged before they are fully discharged without affecting battery life.
- Comprehensive Battery Protection: Protects the battery from damages due to over-discharge, high temperature, or overload.
- Trickle Charging Technology: Enables reactivation of INGCO lithium-ion batteries from an over-discharged state.
- LED-indikator: Provides clear visual feedback on charging status and potential issues.
Graphic highlighting the four key protection features of the INGCO charger: over-voltage, over-current, over-temperature, and general charge protection, ensuring battery safety.
4. Opsætning
- Pakker ud: Tag forsigtigt opladeren ud af emballagen. Undersøg den for tegn på skader.
- Placering: Place the charger on a stable, flat, and dry surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation.
- Tilslut til strøm: Plug the charger's power cord into a standard electrical outlet (110V-240V~50/60Hz). The LED indicator may briefly illuminate.
5. Betjeningsvejledning
Opladning af et batteri
- Indsæt batteri: Slide the INGCO 20V Li-ion battery pack firmly into the charger's slot until it clicks into place.
- Monitor LED-indikator: The charger's LED indicator will show the charging status.
- Opladning fuldført: Once the battery is fully charged, the LED indicator will change to a solid green light.
- Fjern batteri: Press the battery release button (if applicable) and slide the battery out of the charger.
- Frakobl opladeren: Tag opladeren ud af stikkontakten, når den ikke er i brug.
Omtrentlig opladningstider
- 20V 2.0Ah Battery: Approximately 1 hour
- 20V 4.0Ah Battery: Approximately 2 hours
Visual representation of the INGCO charger's performance, indicating that a 20V 2.0Ah battery charges in 1 hour and a 20V 4.0Ah battery charges in 2 hours.
Diagram illustrating the INGCO charger connected to a 20V 4.0Ah Li-ion battery, with a power indicator showing the charging progress and indicating a 2-hour charge completion time.
6. Vedligeholdelse
- Rensning: Disconnect the charger from the power supply. Use a soft, dry cloth to wipe the exterior of the charger. Do not use abrasive cleaners or solvents.
- Opbevaring: Store the charger in a dry, cool place, away from direct sunlight and moisture.
- Ledningspleje: Regularly inspect the power cord for any damage. Do not wrap the cord tightly around the charger.
7. Fejlfinding
Refer to the LED indicator for diagnostic information:
| LED-indikator | Status | Handling |
|---|---|---|
| Blinkende grønt | Opladning | Normal operation. Wait for charging to complete. |
| Solid grøn | Fuldt opladet | Battery is ready for use. Remove from charger. |
| Rød Blinker | Temperaturen er for høj | Allow the battery and/or charger to cool down in a well-ventilated area. Charging will resume automatically once the temperature is within the safe range. |
| Ensfarvet rød | Battery Pack Failure | The battery pack may be faulty or severely over-discharged. Try another battery. If the issue persists, contact customer support. |
Nærbillede view of the INGCO charger's LED indicators, explaining different light patterns for charging status and errors.
8. Specifikationer
| Parameter | Værdi |
|---|---|
| Modelnummer | FCLI2001A |
| Mærke | Ingco |
| Vurderet input Voltage | 110V-240V~50/60Hz |
| Udgang Voltage | 20 volt |
| Ladestrøm | 2A |
| Nominel indgangseffekt | 50W |
| Produktdimensioner | 5.75 x 4.02 x 3.62 tommer (14.6 x 10.2 x 9.2 cm) |
| Varens vægt | 14.9 ounce (422.4 gram) |
| Specifikation Met | FCC |
Image displaying the technical specifications of the INGCO FCLI2001A charger.
9. Garanti og support
For warranty information, technical support, or service inquiries, please refer to the official INGCO website or contact your local INGCO dealer. Keep your purchase receipt as proof of purchase for any warranty claims.
