Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- 1x Wall Mount Bluetooth Amplivligere
- 1x vekselstrømsadapter
- 2 x skruer
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Opsætning
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. Amplivligere installation
Indervæggen amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Forbered væggen: Use the provided template (if applicable) to mark and cut an opening in the wall for the amplivligere.
- Tilslut strømkabel: Connect the 12V DC power cable to the designated two-pin connector on the back of the amplifier modul.
- Tilslut lydkabel: Connect the audio cable to the three-pin connector on the back of the amplifier modul.
- Sikker Amplivligere: Indsæt amplifier module into the wall opening and secure it using the provided screws.
- Fastgør frontplade: Place the decorative faceplate over the installed amplifier and secure it.
2. Installation af højttalere
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Markeringsklip: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Skær åbning: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Fjern gitter: Gently remove the magnetic grille from the front of each speaker.
- Tilslut højttalerledninger: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Indsæt højttaler: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Stram Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Ledningsdiagram
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Strømtilslutning
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Betjeningsvejledning
Learn how to use your Herdio ceiling speaker system.
1. Tænd/sluk og lydstyrkekontrol
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Bluetooth-parring
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Valg af input
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB-funktionalitet
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Mikrofonindgang
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Opretholdelse
To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampLifier, følg disse vedligeholdelsesretningslinjer:
- Rensning: Brug en blød, tør klud til at rengøre amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Fjernelse af støv: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Miljøforhold: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Ledningsinspektion: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
Fejlfinding
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Ingen strøm:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
- Ingen lyd fra højttalerne:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the amplifier er skruet op.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Problemer med Bluetooth-forbindelse:
- Sørg for amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Genstart begge amplifier og din Bluetooth-enhed.
- Forvrænget lyd:
- Skru ned for lydstyrken på begge amplifier og din lydkildeenhed.
- Check speaker wire connections for any loose strands or short circuits.
- Ensure the audio source is not overdriven or producing distorted signals.
Specifikationer
| Mærke | Herdio |
| Modelnavn | HCS 818 |
| Højttaler type | Bashøjttaler, diskanthøjttaler |
| Højttaler størrelse | 6.5 tommer |
| Højttaler Maksimal udgangseffekt | 320 watt |
| Impedans | 8 Ohm |
| Frekvensrespons | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Forbindelsesteknologi | Auxiliary, Bluetooth, USB |
| Trådløs kommunikationsteknologi | Bluetooth |
| Bluetooth rækkevidde | 30 fod |
| Input bindtage | 120 volt |
| Strømkilde | Elektrisk med ledning |
| Monteringstype | Flush Mount, Ceiling Mount |
| Produktdimensioner (Amplivligere) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the amplivligere. Amplifier is typically smaller, as shown in images.) |
| Materiale | Acrylonitril Butadien Styren (ABS) |
| Er vandtæt | FALSK (Ikke vandafvisende) |
| Varens vægt | 9.08 pund (samlet pakkevægt) |
Garantioplysninger
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier leveres med en Begrænset garanti. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Støtte
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webwebsted.
