Weego N70 12V Portable Jump Starter User Manual

1. Introduktion

The Weego N70 is a portable 12V jump starter designed to provide a reliable power source for starting vehicles with dead batteries. It features 2500 peak amps and 700 cranking amps, suitable for all gas engines and diesel engines up to 5 liters. This device also functions as a portable power bank for USB and 12V devices and includes a 400-lumen flashlight.

Image: The Weego N70 portable jump starter unit in red, shown with its attached Smarty Clamps.

2. Hvad er der i æsken

Upon opening your Weego N70 package, verify that all the following components are included:

• Pre-charged Power Pack (Weego N70 Jump Starter)
• Smarty Clamps
• Vægoplader
• Bil oplader
• USB Type-C opladningskabel
• Hook and Lanyard
• Hurtig startvejledning
• Registreringskort
• Weather Resistant Bag

Billede: En overview of the Weego N70 package contents, including the jump starter, Smarty Clamps, various charging cables, and accessories.

3. Opsætning og første opladning

Before first use, it is recommended to fully charge your Weego N70.

1. Connect the USB Type-C charging cord to the USB-C IN port on the Weego N70.
2. Connect the other end of the USB Type-C charging cord to either the provided wall charger or car charger.
3. Plug the charger into a power outlet (wall or vehicle 12V accessory port).
4. The battery indicator lights on the Weego N70 will illuminate, indicating charging status. All lights will be solid when fully charged.
5. A full charge typically takes a few hours. Ensure the unit is fully charged for optimal performance.

It is advisable to recharge the Weego N70 every 3-6 months, even if not used, to maintain battery health.

Image: A detailed diagram highlighting the various ports and buttons on the Weego N70 unit, including the USB-C IN port.

4. Operating Instructions: Jump Starting Your Vehicle

Follow these steps carefully to safely jump start your vehicle:

1. Ensure Vehicle is Off: Sluk for tændingen på dit køretøj og alt tilbehør.
2. Connect Smarty Clamps: Plug the Smarty Clamps into the Weego N70's Smarty Clamps socket. Ensure a secure connection.
3. Vedhæft Clamps til batteri:
   • Vedhæft rød (+) clamp to your vehicle's positive (+) battery terminal.
   • Vedhæft sort (-) clamp to a secure, unpainted metal part of your vehicle's chassis (ground point), away from the battery and fuel lines. Alternatively, you can attach it to the negative (-) battery terminal if accessible and safe.
4. Kontroller indikatorlamper: The Smarty Clamps have indicator lights and sounds. Wait for a fast grønt lys, indicating a safe and ready connection. If you see a red light or hear an alarm, refer to the troubleshooting section.
5. Start køretøj: Once the green light is solid, start your vehicle's engine.
6. Afbryd Clamps: As soon as the engine starts, immediately disconnect the black (-) clamp først, derefter den røde (+) clamp from the battery. Disconnect the Smarty Clamps from the Weego N70.

Vigtig: Do not leave the Weego N70 connected to the vehicle battery for extended periods after the engine has started.

Image: A visual guide demonstrating the three steps to jump start a vehicle using the Weego N70: attach clamps, wait for green light, and start engine.

5. Sikkerhedsfunktioner

The Weego N70 is equipped with patented Smarty Clamps that incorporate multiple safety protections to ensure safe operation:

• Anti-gnist: Prevents sparks when connecting the clamps.
• Omvendt polaritetsbeskyttelse: Advarsler hvis clamps are connected incorrectly (red to negative, black to positive).
• Strømstødsbeskyttelse: Safeguards against sudden voltage pigge.
• Overtemperaturbeskyttelse: Shuts down if the unit gets too hot.
• Voltage Detektion: Skærme batteri voltage for sikker drift.
• Indikator for omvendt forbindelse: Visual and audible alerts for incorrect connections.

Image: An illustration highlighting the built-in safety features of the Weego N70, including anti-spark, voltage detection, over-temperature protection, and reverse connection indication.

Image: Close-up of the Smart Box on the Smarty Clamps, showing the bypass button and indicator lights.

6. Yderligere funktioner

6.1. Bærbar powerbank

The Weego N70 can charge various electronic devices via its USB-A port and power 12V accessories.

• USB-A-output: Connect your USB charging cable to the USB-A port to charge smartphones, tablets, and other USB-powered devices.
• 12V Accessory Port: Use this port to power 12V accessories such as portable air pumps or tire inflators (accessories not included).

Image: The Weego N70 unit shown on a picnic table, charging a smartphone and tablet, alongside a lantern.

6.2. 400 Lumen Flashlight

The built-in 400-lumen LED flashlight provides illumination in low-light conditions. It features multiple modes:

• Solid Beam: Til generel belysning.
• Strobe: Til signalering eller tiltrækning af opmærksomhed.
• SOS: Til nødsignalering.

Press the flashlight button to cycle through the modes.

Image: The Weego N70's flashlight illuminating the words "SOLID", "STROBE", and "SOS", demonstrating its various light modes.

7. Vedligeholdelse

• Genoplad regelmæssigt: Recharge the Weego N70 every 3-6 months to maintain optimal battery life, even if not in use.
• Opbevaring: Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Rensning: Wipe the unit with a dry cloth. Do not use harsh chemicals or immerse in water.
• Inspicer Clamps: Periodically check the Smarty Clamps for any signs of damage or corrosion.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

Weego offers lifetime support for its products. If you have questions or encounter any issues, please contact the USA-based Weego support team.

For assistance, refer to the contact information provided in your Quick Start Guide or on the official Weego webwebsted.