Pro-Ject Debut III Phono SB BT Turntable User Manual

Indledning

Thank you for choosing the Pro-Ject Debut III Phono SB BT Turntable. This manual provides essential information for setting up, operating, and maintaining your new turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Sikkerhedsinstruktioner

• Frakobl altid pladespilleren fra strømforsyningen, inden du rengør den eller udfører nogen form for vedligeholdelse.
• Udsæt ikke pladespilleren for regn eller fugt.
• Avoid placing the turntable in direct sunlight or near heat sources.
• Sørg for korrekt ventilation omkring enheden.
• Do not place heavy objects on the turntable.
• Brug kun den strømforsyning, der følger med enheden.
• Opbevares utilgængeligt for børn.

Hvad er der i æsken

Carefully unpack all items from the packaging. Please ensure all components listed below are present:

• Pro-Ject Debut III Phono SB BT Turntable Unit
• Støvdæksel
• Connection Cable (RCA)
• Instruktionsmanual
• Strømforsyning

Opsætning

Følg disse trin for at konfigurere din pladespiller:

1. Placering: Place the turntable on a stable, level surface away from vibrations and direct sunlight.
2. Installation af tallerken: Carefully place the main platter onto the spindle. Ensure it sits securely.
3. Montering af bælte: Locate the drive belt and carefully stretch it around the motor pulley and the sub-platter.
4. Tonearm Setup:
   

   Billede: Detaljeret view of the tonearm, showing the counterweight and anti-skate wire.

   The Ortofon OM5e cartridge is typically pre-mounted. Adjust the counterweight by rotating it until the tonearm floats horizontally. Then, set the tracking force according to the cartridge manufacturer's recommendation (typically 1.75g for OM5e). Attach the anti-skate weight to the anti-skate wire and loop it over the appropriate groove on the anti-skate stub.
5. Tilslutning til lydsystem:
   

   Billede: Side profile of the turntable, highlighting its sturdy plinth and isolation feet.

   Connect the RCA output cables from the turntable to an available input on your amplifier or powered speakers. Since this model has a built-in phono preamp, you can connect it to a standard line-level input (e.g., AUX, CD, LINE). If your amplifier has a dedicated phono input, you may choose to bypass the internal preamp if desired (refer to the turntable's specific instructions for preamp bypass).
6. Bluetooth-forbindelse: To connect wirelessly, ensure your Bluetooth speaker or receiver is in pairing mode. Press and hold the Bluetooth pairing button on the turntable (if available, refer to specific model instructions for location) until the indicator light flashes. Select 'Pro-Ject Turntable' or similar from your device's Bluetooth list.
7. Strømtilslutning: Connect the power supply to the turntable's power input and then plug it into a wall outlet.

Drift

Operating your turntable is straightforward:

1. Tænd/sluk:
   

   Image: The power switch, typically located on the underside or side of the plinth.

   Use the power switch to turn the turntable on or off.
2. Hastighedsvalg: The turntable supports 33, 45, and 78 RPM speeds. Use the electronic speed switch to select the appropriate speed for your record. For 78 RPM records, a special stylus (not included) is required.
3. Afspilning af en plade:
   

   Billede: Overhead view of the turntable, showing the platter, record mat, and tonearm.

   Place a record on the platter. Carefully lift the tonearm using the cueing lever. Position the stylus over the desired groove on the record. Gently lower the cueing lever to allow the stylus to descend onto the record.
4. Stop af afspilning: At the end of a record, the tonearm will not automatically lift. Use the cueing lever to raise the tonearm and return it to its rest.

Opretholdelse

Regular maintenance ensures the longevity and performance of your turntable:

• Rengøring af drejeskiven: Brug en blød, tør og fnugfri klud til at rengøre soklen og støvdækslet. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Styluspleje:
  

  Billede: Detaljeret view of the Ortofon OM5e cartridge and stylus, positioned over a record.

  Gently clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Do not touch the stylus with your fingers. Replace the stylus periodically (e.g., every 500-1000 hours of playback) or if you notice a degradation in sound quality.
• Rengøring af plader: Hold dine plader rene for at forhindre støvophobning på pennen og forbedre lydkvaliteten.

Fejlfinding

Hvis du støder på problemer med din pladespiller, kan du se følgende almindelige problemer og løsninger:

If the problem persists, please contact Pro-Ject customer support.

Specifikationer

Key specifications for the Pro-Ject Debut III Phono SB BT Turntable:

• Produktdimensioner: 16.34 x 12.6 x 4.53 tommer
• Varens vægt: 13.2 pund (6 kilo)
• Tonearm: 8.6 inch one-piece low-resonance aluminium tonearm
• Patron: Ortofon OM5e (pre-installed)
• Forbindelse: Auxiliary (RCA), Bluetooth
• Maksimal rotationshastighed: 78 o/min (understøtter 33, 45, 78 o/min)
• Særlige funktioner: Adjustable Speed, Built-in Phono Preamp
• Chassis materiale: High-quality MDF chassis in high-gloss black
• Strømforbrug (tændt): 4 watt

Garanti og support

This Pro-Ject turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, service, or warranty claims, please contact Pro-Ject Audio Systems customer service through their official webwebstedet eller de kontaktoplysninger, der følger med din købsdokumentation.