ORTUR Laser Master 2 Pro S2-lu2-2 Brugsanvisning

1. Introduktion

Welcome to the instruction manual for your ORTUR Laser Master 2 Pro S2-lu2-2 Laser Engraver. This device is designed for precise engraving and cutting of various materials, offering advanced features and enhanced safety. Please read this manual thoroughly before operation to ensure safe and efficient use of your machine.

Vigtige sikkerhedsoplysninger

This product contains a Class 4 laser. Direct exposure to the laser beam can cause severe eye damage and skin burns. Always wear the provided safety goggles during operation. Never look directly into the laser beam. Ensure proper ventilation and fire safety measures are in place. Keep children and pets away from the operating area.

Figure 1: The ORTUR Laser Master 2 Pro S2-lu2-2 laser engraver, showcasing dens design og en example of a detailed engraving on wood.

2. Nøglefunktioner

The ORTUR Laser Master 2 Pro S2-lu2-2 is equipped with several advanced features to enhance your engraving and cutting experience:

• New Upgrade Pro Model 1600mW: Enhanced reliability, smoother engraving, faster speed, and higher accuracy for refined products.
• Overall Optimization: Optimized mechanical structure for longer service life and stable long-term operation.
• Avanceret bundkort: Features the latest OLM-PRO-V10 motherboard for smoother, more delicate engraving and higher precision.
• Upgraded Circuit System: 24V voltage system for lower current and increased safety.
• Ortur Laser 1.8 Firmware: The most advanced laser engraving machine firmware, optimizing motion algorithms and increasing maximum stepper motor speed from 4000mm/min to 10000mm/min.
• Second-Generation FAC Laser Module (LU2-2): Features a smaller focal point of only 0.07*0.06mm, allowing for finer details and the ability to cut through 3mm plywood and 6mm pine board in a single pass.
• Stort graveringsområde: 400 x 400 mm working area.
• Robust konstruktion: Aluminium profile frame and structured cabling ensure a solid structure and smooth operation.
• Synchronizing Shaft Mechanical Structure: Prevents out-of-sync issues on Y rails during high-speed engraving.
• Nyt øjenbeskyttelsesdesign: Laser protective cover filters out 98% UV light, reducing the need for additional goggles.

Enhanced Safety Protection System

• Flame Detector & Buzzer Alarm: Automatically stops and beeps if flame is detected.
• Nødstop: Dedicated switch for immediate shutdown in emergencies.
• Aktiv positionsbeskyttelse: Laser beam stops if unauthorized movement is detected via a G-sensor.
• Laser Beam Safety Guard: Laser beam stops if computer system halts or USB cable disconnects.
• Detektion og begrænsning af eksponeringsvarighed: Laser beam automatically stops after a period of inactivity to prevent fire.
• Strømstyringssystem: Cuts power to the laser module if disconnected from power.

Figur 2: Overview of the six integrated safety protection features.

Figure 3: A detailed breakdown of the safety mechanisms, illustrating how the machine responds to various unsafe conditions.

3. Opsætning og montering

The ORTUR Laser Master 2 Pro S2-lu2-2 comes with pre-assembled parts, significantly simplifying the setup process. Most users can complete the assembly within 10-20 minutes.

Samlingstrin (generelt overview):

1. Pak alle komponenter ud, og kontroller dem med pakkelisten.
2. Assemble the main frame components according to the included quick start guide.
3. Monter lasermodulet på gantryen.
4. Connect all necessary cables (power, USB, motor cables).
5. Ensure the machine is placed on a stable, level surface in a well-ventilated area.

For detailed, step-by-step assembly instructions, please refer to the official assembly guide provided with your product or visit the Ortur support website. It is crucial to follow these instructions precisely to ensure proper functionality and safety.

4. Betjeningsvejledning

The ORTUR Laser Master 2 Pro S2-lu2-2 is compatible with popular laser control software such as LaserGRBL and LightBurn, supporting Windows 7/8/XP/10/11 and Mac operating systems.

Figure 4: The engraver's compatibility with various operating systems and software.

Basic Operation Workflow:

1. Software installation: Install your preferred laser control software (LaserGRBL or LightBurn) on your computer.
2. Tilslut enhed: Connect the laser engraver to your computer via USB.
3. Materiale placering: Place the material to be engraved or cut onto the working area. Ensure it is flat and secured.
4. Fokusjustering: Adjust the laser focus according to the material thickness. The LU2-2 module has a small focal spot for precision.
5. Designforberedelse: Importer eller opret dit design i softwaren.
6. Parameterindstillinger: Set appropriate power, speed, and pass settings based on the material type and desired outcome.
7. Start gravering/skæring: Start processen fra softwaren. Overvåg nøje driften.

The machine supports PWM mode for precise laser control. For optimal results, experiment with settings on scrap materials before working on your final piece.

Demonstration Video: Engraving on Wood

Video 1: This video demonstrates the ORTUR Laser Master 2 Pro S2-lu2-2 in action, engraving a design onto a piece of wood. It showcases the laser module's movement and the precision of the engraving process.

Figur 5: Eksamples of materials suitable for engraving and cutting with the device.

5. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your ORTUR Laser Master 2 Pro S2-lu2-2. Always disconnect power before performing any maintenance.

• Rensning: Regularly clean the machine's frame, rails, and laser lens to prevent dust and debris buildup. Use a soft, lint-free cloth.
• Laserlinse: Carefully clean the laser lens with a specialized lens cleaning solution and cloth to maintain engraving quality.
• Smøring: Periodically lubricate the moving parts, such as the guide rails, with appropriate lubricant to ensure smooth operation.
• Kabelinspektion: Check all cables for wear or damage and replace if necessary.

Proper maintenance helps prevent issues and ensures consistent, high-quality results from your engraver.

6. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på, og giver løsninger.

7. Tekniske specifikationer

8. Garanti og support

Ortur is committed to providing excellent customer service and support for your Laser Master 2 Pro S2-lu2-2.

Kundesupport:

For any questions, technical assistance, or warranty inquiries, please contact Ortur customer support. They offer round-the-clock support through various channels:

• 

  E-mail
• 

  Live Chat

• 

  Facebook

You can also visit the official Ortur store for more information and resources: Ortur Official Store