1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOLFSTORM Headlights. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your headlights.
Image 1.1: A pair of WOLFSTORM headlights, showcasing their design and clear lens.
2. Kompatibilitet
These WOLFSTORM Headlights are designed for direct OEM fitment on the following Dodge Ram models:
- 1994-2001 Dodge Ram 1500
- 1994-2002 Dodge Ram 2500
- 1994-2002 Dodge Ram 3500
- 1995-2002 Dodge Ram 4000
These headlights are compatible with models uden the Sport Package.
Image 2.1: Visual guide indicating compatible Dodge Ram models and years for the headlights.
3. Produktfunktioner
- Direct OEM Fitment: Engineered to replace original factory headlights without modifications.
- Vandtæt design (IP67): The sealed chrome housing provides protection against dust, water, and moisture, enhancing durability.
- DOT & SAE Compliance: Manufactured to meet USA Department of Transportation (DOT) and Society of Automotive Engineers (SAE) standards.
- Klar linse: Provides optimal light output and visibility.
Image 3.1: Illustration of the headlight's IP67 waterproof rating, showing resistance to water exposure.
Billede 3.2: Nærbillede view of the headlight lens showing DOT and SAE compliance markings.
4. Opsætning og installation
The WOLFSTORM Headlights are designed for plug-and-play installation, requiring no additional wiring or modifications. The kit includes direct plugs and connectors.
4.1 Required Bulb Type
The headlights utilize 9004 bulbs for both high and low beam functions. Bulbs are not included with the headlight assembly and must be purchased separately.
Image 4.1: Diagram indicating the bulb type (9004) required for the high/low beam light, noting that bulbs are not included.
4.2 Installationstrin (generel vejledning)
- Forberedelse: Sørg for, at dit køretøj er slukket, og at batteriet er frakoblet af sikkerhedsmæssige årsager.
- Fjern gamle forlygter: Carefully unbolt and disconnect the wiring from your existing headlights.
- Installer pærer: Insert the appropriate 9004 bulbs into the new WOLFSTORM headlight assemblies. It is often easier to install bulbs before mounting the assembly to the vehicle.
- Monter nye forlygter: Position the new headlight assemblies into the vehicle's headlight housing. Secure them with the original mounting hardware.
- Tilslut ledninger: Attach the headlight's electrical connectors to the vehicle's wiring harness.
- Test funktionalitet: Reconnect the battery and test all light functions (low beam, high beam, turn signal) before final adjustment.
Billede 4.2: View of the rear of the headlight assembly, showing the light position and bulb socket for installation.
5. Betjening
Your WOLFSTORM Headlights function identically to your vehicle's original equipment, providing both low beam and high beam illumination. Activate these functions using your vehicle's standard headlight switch and stalk controls.
Image 5.1: Comparison of low beam and high beam light patterns on a road, demonstrating the difference in illumination range.
6. Vedligeholdelse
The WOLFSTORM Headlights are designed for minimal maintenance due to their sealed, waterproof construction. Regular cleaning with a soft cloth and mild soap solution is recommended to maintain lens clarity. Avoid abrasive cleaners.
6.1 Moisture Management
Each headlight assembly includes a one-way vent designed to release any accumulated moisture from inside the housing, preventing condensation and maintaining light performance.
Billede 6.1: Detaljeret view of the headlight's rear, highlighting the one-way vent for moisture release and the high/low beam adjuster.
7. Fejlfinding
7.1 Justering af strålevinkel
If the headlight beam appears too high or too low after installation, the beam angle can be adjusted. Locate the high/low beam adjuster screw on the back of the headlight assembly (refer to Image 6.1). Use an appropriate tool to turn the screw, adjusting the beam vertically until the desired alignment is achieved. It may be necessary to remove the headlight assembly to access the adjustment screw on some vehicle models.
7.2 Condensation Inside Lens
Minor condensation inside the headlight lens can occur due to temperature fluctuations. The integrated one-way vent is designed to manage this. If excessive or persistent condensation occurs, ensure the vent is clear and unobstructed. Verify that all seals and bulb covers are properly seated and intact.
8. Specifikationer
| Mærke | ULVESTORM |
| Modelnummer | WSA10-0292 |
| Farve | Chrome Housing, Clear Lens |
| Specifikke anvendelser | Forlygter |
| Type køretøjstjeneste | Lastbil |
| Speciel funktion | Vandtæt (IP67) |
| Auto del position | Front |
| Linse materiale | Plast |
| Varedimensioner (L x B x H) | 13.2 x 8.7 x 12.04 tommer |
| Varens vægt | 7.88 pund |
| OEM Part Number (Right) | 55076748AO; 55076748AD; 55076748AI |
| OEM Part Number (Left) | 55076749AO; 55076749AD; 55076749AI |
9. Garanti og support
WOLFSTORM offers a 30-dages tilbagebetalingspolitik og en 12 måneders begrænset garanti on these headlights. For any questions regarding purchase, installation, or after-sales support, please contact WOLFSTORM customer service. Technical support is available 24/7.
For assistance, please refer to the contact information provided with your purchase or visit the official WOLFSTORM webwebsted.
