Aquasure AS-PR75A Premier Reverse Osmosis Water Filtration System

Indledning

The Aquasure Premier Series Reverse Osmosis Drinking Water System (Model AS-PR75A) is engineered to provide high-quality drinking water by effectively reducing a wide range of contaminants. This manual provides essential information for the proper installation, operation, and maintenance of your system to ensure optimal performance and longevity.

Læs venligst denne manual grundigt inden installation, og gem den til senere brug.

Figure 1: Aquasure AS-PR75A Premier Reverse Osmosis Water Filtration System components.

Sikkerhedsoplysninger

Observe the following safety precautions to prevent injury and damage to the system:

• Sluk altid for vandtilførslen, før du udfører vedligeholdelse eller filterskift.
• Sørg for, at alle forbindelser er sikre for at forhindre lækager.
• Udsæt ikke systemet for frostgrader.
• Use only genuine Aquasure replacement filters and parts.
• Hold systemet væk fra direkte sollys og varmekilder.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Aquasure Premier RO System Head with Filters (Pre-Sediment, Carbon Block, RO Membrane, Post-Carbon)
• Pressurized Reverse Osmosis Water Storage Tank (4 Gallon)
• Designer Faucet (Chrome)
• Feed Water Adapter (1/4" Feed-Water 3/8" and 1/2" Dual Angle Stop Adapter)
• Afløbssadel
• Hydrofit Tank Ball Valve
• Color-Coded Polyethylene Tubing (Feed Water, Product Water, Drain Water)
• Quick Connect Fittings and Locking Clips
• Shok-Blok Pressure Protection Valve
• Flow-Lock Leak Detection System
• Ice Maker Water Line Kit (Optional, if included in bundle)

Figur 2: Detaljeret view of system components and fittings.

Figure 3: Components of the optional Ice Maker Water Line Kit.

Opsætning og installation

This section outlines the steps for installing your Aquasure Premier RO system. Refer to the system diagram for component identification.

Figure 4: Installation diagram for the Aquasure Premier RO System.

1. Kontrol før installation:
   • Ensure you have adequate space under your sink for the system and tank.
   • Confirm water pressure is within recommended limits (40-80 PSI).
   • Gather necessary tools (drill, wrench, utility knife, etc.).
2. Installer vandhanen:
   • Drill a 1/2 inch hole in your sink or countertop at the desired faucet location.
   • Mount the faucet, ensuring a secure and watertight seal.
3. Connect the Feed Water Adapter:
   • Turn off the cold water supply to your sink.
   • Disconnect the cold water line from the angle stop valve.
   • Install the feed water adapter onto the angle stop valve, then reconnect the cold water line.
4. Installer afløbssadlen:
   • Locate a suitable drain pipe section above the P-trap.
   • Drill a 1/4 inch hole in the drain pipe.
   • Attach the drain saddle securely over the drilled hole.
5. Position the RO System and Tank:
   • Place the RO system unit and the storage tank in their desired locations under the sink.
6. Tilslut rør:
   • Connect the red tubing from the feed water adapter to the inlet of the RO system.
   • Connect the black tubing from the drain saddle to the drain port on the RO system.
   • Connect the yellow tubing from the RO system to the storage tank via the tank ball valve.
   • Connect the blue tubing from the RO system to the RO faucet.
   • Ensure all quick-connect fittings are fully inserted and secured with locking clips.
7. Initial System Flush:
   • Tænd langsomt for koldtvandstilførslen.
   • Open the RO faucet and allow water to flow for at least 24 hours to flush the system and new filters. This is crucial for optimal taste and performance.
   • Close the RO faucet and allow the storage tank to fill completely (this may take 2-4 hours).
   • Drain the tank completely by opening the RO faucet again. Repeat this fill/drain cycle 2-3 times.

Betjeningsvejledning

Once installed and flushed, your Aquasure Premier RO system operates automatically. Water flows through the system, is purified, and stored in the tank, ready for dispensing through the dedicated faucet.

Figure 5: Dispensing purified water from the RO faucet.

Understanding the Filtration Process:

Figure 6: Engineering performance and filter stages.

• Stage 1 (AF-PR1 - Pre-Sediment Filter): Removes sediment, rust, sand, and other large particles, protecting subsequent filters.
• Stage 2 (AF-PR2 - Carbon Block Filter): Reduces chlorine, taste, odor, and other chemicals.
• Stage 3 (AF-MEM75 - RO Membrane): The core of the system, rejecting up to 99% of dissolved solids, heavy metals, and other contaminants.
• Stage 4 (AF-PR4 - Post-Carbon Filter): Provides final polishing for taste and odor, ensuring crisp, clean water.

The system features a Built-in Check Valve to prevent backflow and a 90° Quick Twist Lock for easy filter installation and removal.

Opretholdelse

Regular maintenance, primarily filter replacement, is crucial for the continued performance and water quality of your RO system.

Filterudskiftning:

The Aquasure Premier system features a quick-twist cartridge design for simplified filter changes.

Figure 7: Effortless filter replacement with quick-twist design.

1. Sluk for vandforsyningen: Close the feed water adapter valve and the tank ball valve. Open the RO faucet to relieve pressure.
2. Fjern gamle filtre: For each filter, twist counter-clockwise to unlock and pull down to remove.
3. Installer nye filtre: Insert the new filter cartridge into the corresponding housing and twist clockwise to lock it into place. Ensure the correct filter type is used for each stage (refer to filter labels).
4. Genopret vandforsyningen: Slowly open the tank ball valve and then the feed water adapter valve.
5. Flush New Filters: Open the RO faucet and allow water to run for 10-15 minutes to flush out any carbon fines from the new filters.

Recommended Filter Change Schedule:

• Pre-Sediment (AF-PR1) & Carbon Block (AF-PR2): Every 6-12 months, depending on water quality and usage.
• RO Membrane (AF-MEM75): Every 2-3 years, depending on water quality and usage.
• Post-Carbon (AF-PR4): Hver 12. måned.

Note: Actual filter life may vary based on incoming water quality and daily water consumption.

Fejlfinding

This section provides solutions to common issues you might encounter with your Aquasure Premier RO system.

If you experience issues not covered here, please contact Aquasure customer support.

Specifikationer

Garanti og support

Specific warranty details for the Aquasure AS-PR75A Premier Reverse Osmosis Water Filtration System are not provided within this manual. For warranty information, technical support, or to purchase replacement parts, please visit the official Aquasure webhjemmeside eller kontakt deres kundeserviceafdeling direkte.

Fabrikant: Aquasure

Webwebsted: www.aquasureusa.com (Eksample link, please refer to product packaging or official documentation for exact contact details)