DBPOWER Bilstarter Brugermanual

1. Sikkerhedsoplysninger

Læs venligst alle sikkerhedsadvarsler og instruktioner, før du bruger dette produkt. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Do not short-circuit the jump starter.
• Udsæt ikke produktet for høje temperaturer eller direkte sollys i længere perioder.
• Hold produktet væk fra børn og kæledyr.
• Ensure proper polarity connection (red to positive, black to negative) when jump starting.
• The intelligent jumper clamps are designed with multiple protection technologies including overcurrent, short circuit, overload, over-voltage, and over-charge protection.

2. Pakkens indhold

Kontroller at alle varer er til stede i pakken:

• • DBPOWER DJS90 Car Battery Jump Starter
• • Heavy-duty Smart Jumper Clamps
• • USB to Type-C Charging Cable
• • Hard Storage Case
• • Brugermanual

Image: All items included in the DBPOWER DJS90 package.

3. Produktet er slutview

Nøglefunktioner

• Kraftig jumpstarter: 1600A peak current, capable of jump starting most 12V vehicles (up to 7.5L Gas & 6.0L diesel engines) up to 20 times on a single charge.
• Alsidig strømforsyning: 18000mAh battery capacity with 5V/2.1A USB output, smart USB port, and a 5V/3A Type-C in/out port for charging smartphones, tablets, and other USB devices.
• Intelligent Clamps: LCD intelligent spray gold clamps with comprehensive protection technologies.
• LCD-skærm: Intuitive screen to monitor product status and remaining power.
• Integreret belysning: LED flashlight with 3 modes (Flashlight, Strobe, SOS), integrated compass, and red emergency light.

Image: DBPOWER DJS90 Car Jump Starter and accessories.

Porte og kontroller

Image: Detailed diagram of the jump starter's features and ports.

• 12V/800A Jumping Port: For connecting intelligent jumper clamps.
• 5V/2.1A udgang: Standard USB output port.
• 5V Smart USB Output: Smart USB port for optimized charging.
• 5V/3A Type-C In(Out) Port: Bidirectional Type-C port for charging the unit or external devices.
• ON/OFF knap: Strømstyring til enheden.
• Funktionstast: Controls LED flashlight modes and red emergency light.
• Strømindikatorlys: Shows remaining battery power.
• Kompas: Integrated for navigation.

4. Opsætning

Indledende opladning

Before first use, fully charge the jump starter. It is recommended to fully charge the unit every 3-6 months to maintain battery health, even if not in use.

1. Connect the USB to Type-C charging cable to the jump starter's Type-C In(Out) port.
2. Connect the other end of the cable to a compatible USB wall charger (included) or car charger.
3. The LCD display will show the charging progress. The unit is fully charged when the display shows 100%.

Image: Charging the jump starter using a wall charger.

5. Betjeningsvejledning

Hopstart af et køretøj

Ensure the jump starter has sufficient charge (preferably above 50%) before attempting to jump start a vehicle.

1. Insert the blue plug of the intelligent jumper clamps into the 12V/800A Jumping Port on the jump starter.
2. Tilslut den røde clamp til den positive (+) pol på køretøjets batteri.
3. Tilslut den sorte clamp til den negative (-) pol på køretøjets batteri.
4. Sørg for at clamps are securely attached. The intelligent clamp indicator light will turn green when ready.
5. Start din bils motor.
6. Fjern straks kølemidlet, når motoren starter.ampfra bilens batteri, og afbryd derefter clamps fra jumpstarteren.

Image: Steps for jump starting a car battery.

Bruges som powerbank

The DJS90 can charge various electronic devices.

• Connect your device's USB charging cable to either the 5V/2.1A USB output, the 5V Smart USB output, or the 5V/3A Type-C In(Out) port.
• Jumpstarteren vil automatisk begynde at oplade din enhed.

Image: The jump starter functioning as a portable power bank.

LED-lysfunktioner

The integrated LED light offers multiple modes for different situations.

• Lommelygte: Long press the Function Key to turn on the flashlight.
• Strobe: Short press the Function Key once from flashlight mode.
• SOS: Short press the Function Key twice from flashlight mode.
• Red Emergency Light: Double press the Function Key to activate the red emergency light. This is useful for roadside emergencies to alert other drivers.

Image: LED flashlight modes demonstration.

6. Vedligeholdelse

• Store the jump starter in its protective storage case when not in use.
• Keep the unit charged. It is recommended to recharge the unit every 3-6 months to prolong battery life and ensure it's ready for use.
• Rengør enheden med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.

7. Fejlfinding

If the jump starter is not functioning as expected, consider the following:

• Enheden tænder ikke: Ensure the ON/OFF switch is in the 'ON' position. Check battery level on the LCD display.
• Køretøjet starter ikke: Sørg for, at clamps are properly connected to the battery terminals (red to positive, black to negative). Check that the intelligent clamp indicator light is green. The vehicle battery might be severely discharged; allow the jump starter to connect for a few minutes before attempting to start.
• Opladningsproblemer: Verify the charging cable and adapter are securely connected. Try a different USB port or wall outlet.
• Protection activated: If the unit shuts off or shows an error, one of the built-in protection features (e.g., overcurrent, short circuit) may have been triggered. Disconnect and re-evaluate the situation before attempting again.

8. Specifikationer

9. Garanti og support

DBPOWER provides 24 months of hassle-free service and lifetime technical support for this product.

For any questions or assistance, please contact DBPOWER customer support:

• Webwebsted: Visit the official DBPOWER webwebsted for supportressourcer.
• E-mail: Se din produktemballage eller den officielle webwebsted for kontakt-e-mail.