Vigtige sikkerhedsoplysninger
Please read and understand all instructions before installing and using this product. Failure to follow these warnings and instructions could result in property damage, serious injury, or death.
- Always supervise children around the hot tub.
- Do not use the hot tub if the water temperature exceeds 104°F (40°C).
- Consult a doctor before use if you have health conditions, are pregnant, or are elderly.
- Do not operate the hot tub in temperatures below 43°F (6°C) to prevent damage to the unit.
- Sørg for, at spabadet er placeret på en flad, stabil overflade, der kan bære dets fulde vægt, når det er fyldt.
- Hold alle elektriske komponenter tørre og væk fra vand.
Pakkens indhold
Bekræft, at alle komponenterne nedenfor er inkluderet i din pakke:
Billede: Overview of all items included in the hot tub package, such as filter cartridges, shelf, inflation hose, repair kit, zip cover, ground sheet, inflatable spa tub, and instruction manual.
- 1 x Inflatable Spa Tub
- 2 x filterpatron
- 1 x Zip Cover
- 1 x 1-Way Valve
- 2 x Air Valve Cap
- 2 x reparationssæt
- 1 x oppustningsslange
- 1 x Drainage Bung
- 2 x Child Safety Key
- 2 x Filter Cover
- 1 x Water Inlet / Outlet Spanner
- 1 x Ground Sheet
- 1 x brugsanvisning
- 1 x Spa Side Table
Opsætningsinstruktioner
1. Valg af sted
Choose a flat, level surface for your hot tub. Ensure the area is clear of sharp objects and can support the weight of the filled hot tub (approximately 145 gallons of water plus occupants). Place the included ground sheet before positioning the hot tub.
2. Inflation
The Edostory hot tub features a built-in air pump for convenient inflation. Connect the inflation hose to the air inlet valve on the hot tub and the pump. Press the "Bubble" button on the digital control panel to begin inflation. The hot tub will inflate within minutes. Ensure the hot tub is firm but not over-inflated. Once inflated, secure the air valve caps.
Image: Illustration of the built-in inflation system, highlighting the air inlet and outlet ports for easy setup.
3. Påfyldning med vand
Fill the hot tub with water using a garden hose. Fill to the indicated maximum water level line inside the tub. Do not overfill.
4. Initial Filter Installation
Install the two filter cartridges into their designated filter covers inside the hot tub. Ensure they are securely in place to allow for proper water filtration.
Image: A hand demonstrating the installation of a filter cartridge into the hot tub's filtration system.
Betjeningsvejledning
The Edostory hot tub is equipped with a user-friendly digital control panel to manage its functions.
Billede: Detaljeret view of the digital control panel, showing buttons for temperature adjustment, filter, bubble jets, and heater.
1. Tænd/sluk
Press the power button on the control panel to turn the hot tub system on or off.
2. Temperaturjustering
Use the temperature increase (up arrow) and decrease (down arrow) buttons to set your desired water temperature. The hot tub can heat water up to 104°F (40°C). The system will automatically maintain the set temperature once reached.
3. Bubble Massage System
Activate the 360-degree high-powered air jet system by pressing the "Bubble" button. This will fill the spa with thousands of bubbles for a relaxing massage. Press the button again to turn off the bubble function.
4. Filtreringssystem
The digital panel also controls the filtration system. Ensure the filter function is active to keep the water clean and clear. The system automatically circulates water through the filters.
Opretholdelse
1. Water Quality and Chemical Balance
Regularly test the water chemistry using appropriate test strips. Adjust pH, alkalinity, and sanitizer levels as needed to ensure safe and clean water. Follow guidelines for hot tub chemical usage.
2. Rengøring og udskiftning af filterpatron
The filter cartridges should be cleaned regularly (e.g., daily or every other day depending on usage) by rinsing them with a garden hose. Replace filter cartridges every few weeks or when they appear worn or dirty to maintain optimal filtration performance.
Image: A clean filter cartridge, ready for installation or after cleaning.
3. Draining and Cleaning
Drain the hot tub periodically (e.g., monthly or as needed) for thorough cleaning. Use the drainage bung to empty the water. Clean the interior surfaces of the hot tub with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
4. Pleje af betræk
Always use the provided zip cover when the hot tub is not in use. This helps retain heat, keeps debris out, and reduces energy consumption. Clean the cover regularly and ensure it is securely fastened with the child safety keys.
Image: The Edostory hot tub with its black zip cover installed, demonstrating proper coverage for heat retention and protection.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Hot tub not heating or heating slowly. | Low ambient temperature; insufficient power supply; heater malfunction; dirty filter. | Ensure ambient temperature is above 43°F (6°C). Check power connection. Clean or replace filter cartridges. If problem persists, contact customer support. |
| Bubbles not working or weak. | Air pump malfunction; clogged air jets. | Ensure the "Bubble" button is activated. Check for any obstructions in the air jets. If problem persists, contact customer support. |
| Water leaking from the hot tub. | Loose drain bung; puncture in the liner; valve not sealed properly. | Tighten the drainage bung. Inspect the hot tub for visible punctures and use the repair kit if necessary. Ensure all valves are securely closed. If leak persists, contact customer support. |
| Hot tub losing inflation. | Air valve not sealed; small puncture. | Ensure air valve caps are tightly secured. Check for small punctures and use the repair kit. Re-inflate as needed. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | EDOSTORY |
| Modelnavn | PH050012-01 |
| Farve | Sort |
| Produktdimensioner | 75 cm L x 47 cm B x 25 cm H |
| Varens vægt | 53 pund |
| Materiale | Polyvinylchlorid (PVC) |
| Form | Oval |
| Kapacitet | 145 gallons |
| Antal dyser | 90 |
| Siddekapacitet | 2 (Recommended for 2 adults or 1-2 adults + 1-2 children) |
| Montering påkrævet | Ja |
Garanti og support
The Edostory Inflatable Hot Tub Spa comes with a 1-year warranty. If you encounter any problems with your hot tub, please do not hesitate to contact Edostory customer support. They are committed to providing premium after-sale service to help solve any issues you may experience.
For support, please refer to the contact information provided in your original purchase documentation or visit the official EDOSTORY webwebsted.
