1. Introduktion
Thank you for choosing the FNNEMGE Car Jump Starter. This powerful and versatile device is designed to jump start 12V vehicles, including cars, trucks, motorcycles, watercrafts, lawn mowers, and snowmobiles. It also functions as a portable power bank with wireless charging, USB quick charge, an LED flashlight, and a 12V EC-5 output for various automotive accessories. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Vigtige sikkerhedsoplysninger
ADVARSEL: Læs alle sikkerhedsadvarsler og instruktioner. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
- Do not use the jump starter if the smart clamp cable or the device itself is damaged.
- Ensure correct polarity when connecting to a vehicle battery (Red to Positive, Black to Negative). Incorrect connections can cause damage to the device or vehicle.
- Forsøg ikke at sætte gang i et frosset batteri.
- Opbevares utilgængeligt for børn.
- Do not immerse the device in water. It is dustproof and shockproof, but not designed for submersion.
- Undgå at udsætte enheden for ekstreme temperaturer.
- Frakobl smart-cl'enamp cable from the jump starter immediately after the vehicle starts.
3. Pakkens indhold
Upon opening your FNNEMGE Car Jump Starter package, please verify that all the following items are included:
- FNNEMGE Car Jump Starter Unit
- Smart Jumper Cable with Clamps
- Type-C opladerkabel
- USB opladningskabel
- EC-5 cigarettænderadapter
- Opbevaringspose
- Brugervejledning (dette dokument)
Image: All items included in the FNNEMGE Car Jump Starter package.
4. Produktfunktioner
The FNNEMGE Car Jump Starter is equipped with multiple features for convenience and safety:
4.1 Powerful Jump Starting Capability
With a 26800mAh capacity and 6000A peak current, this jump starter can easily start 12V vehicles, including all gas engines and diesel engines up to 10.0L. It is suitable for a wide range of vehicles such as cars, trucks, SUVs, motorcycles, and boats.
Image: The FNNEMGE jump starter is capable of starting various 12V vehicles.
4.2 10W Wireless Power Pack & QC3.0 Fast Charging
The built-in 10W wireless charger and large 26800mAh battery capacity provide ample power to quickly charge your smartphones and other compatible devices. The Quick Charge 3.0 port charges devices significantly faster than conventional charging methods.
Image: Wireless charging and USB Quick Charge 3.0 capabilities.
4.3 Emergency LED Flashlight & Compass
The jump starter features a versatile LED light with four modes: Flashlight, Strobe, SOS, and Red Blue Warning. This makes it ideal for camping, outdoor activities, emergencies, and travel. A built-in compass helps with navigation in the wild.
Image: The LED flashlight in use for emergency situations.
Image: Close-up of the integrated compass for navigation.
4.4 12V EC-5 Output
The included EC-5 output cigarette lighter adapter allows you to power various 12V automotive equipment such as car vacuum cleaners, air compressors, and car refrigerators.
Image: The EC-5 DC 12V output powering automotive accessories.
5. Opsætning og første opladning
Before first use, ensure the jump starter is fully charged. Use the provided Type-C or USB cable to charge the unit. The digital display will show the charging progress.
- Connect the Type-C or USB charging cable to the input port on the jump starter.
- Tilslut den anden ende af kablet til en passende USB-strømadapter (medfølger ikke) eller en USB-port på computeren.
- Det digitale display viser batteriprocententage stigendeasing, mens den oplader.
- Once the display shows 100%, the unit is fully charged and ready for use.
Image: Digital display showing battery status.
6. Betjeningsvejledning
6.1 Jumpstart af et køretøj
Følg disse trin omhyggeligt for at starte dit køretøj med startkabler:
- Sørg for, at jumpstarteren er mindst 50% opladet.
- Connect the blue end of the smart jumper cable to the jump starting port on the jump starter. Ensure a firm connection.
- Tilslut den røde clamp (+) til den positive pol på køretøjets batteri.
- Tilslut den sorte clamp (-) til den negative pol på køretøjets batteri.
- Once connected, the indicator light on the smart cable will turn green, indicating a safe connection. If it's red or flashing, check connections and battery status.
- Start dit køretøj.
- Når køretøjet starter, skal du straks fjerne smart-cl'en.amp from the jump starter, then disconnect the clamps fra køretøjets batteri.
Image: Jump starter connected to a vehicle battery.
Video: A demonstration of connecting and using the FNNEMGE Car Jump Starter to start a vehicle. This video shows the process from unboxing to successful engine start, including the use of the LED light and compass.
6.2 Brug som powerbank
Sådan oplader du dine elektroniske enheder:
- USB-opladning: Connect your device's USB charging cable to one of the USB output ports (USB1 or USB2) on the jump starter. The QC3.0 port provides faster charging for compatible devices.
- Trådløs opladning: Place your Qi-compatible smartphone on the wireless charging pad located on the top surface of the jump starter. Ensure the phone is centered for optimal charging.
Image: Charging multiple devices using the jump starter's USB outputs.
6.3 Brug af LED-lommelygten
Press and hold the power button for 3 seconds to turn on the LED flashlight. Short press the power button to cycle through the different light modes:
- Flashlight (steady on)
- Strobe (fast flashing)
- SOS (Morse code for distress)
- Red Blue Warning (alternating red and blue flashing)
Press and hold the power button again to turn off the flashlight.
6.4 Using the 12V EC-5 Output
To power 12V automotive accessories:
- Insert the EC-5 cigarette lighter adapter into the EC-5 output port on the jump starter.
- Plug your 12V automotive accessory into the cigarette lighter adapter.
7. Vedligeholdelse og opbevaring
- Opladning: For optimal battery life, recharge the jump starter every 3-6 months, even if not used.
- Rensning: Tør enheden af med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
- Opbevaring: Store the jump starter in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Vandtæt/støvtæt: The device is designed to be waterproof, dustproof, and shockproof, making it reliable for outdoor activities and adverse weather conditions. However, avoid intentional submersion.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Køretøjet starter ikke. | Lavt batteri på jumpstarter; forkert CLamp forbindelse; bilbatteriet er helt dødt. | Ensure jump starter is sufficiently charged. Check clamp connections for correct polarity and secure contact. If vehicle battery is extremely low, use the override function on the smart cable (refer to smart cable instructions). |
| Smart-kabelindikatorlampen blinker rødt. | Incorrect polarity; short circuit; over-temperature. | Afbryd clamps and re-connect with correct polarity. Check for any short circuits. Allow device to cool down if it's hot. |
| Enheden oplader ikke. | Faulty cable; faulty adapter; charging port issue. | Try a different charging cable and/or USB power adapter. Ensure the charging cable is fully inserted into the port. |
| Trådløs opladning virker ikke. | Phone not Qi-compatible; phone not centered; phone case too thick. | Sørg for, at din telefon understøtter trådløs Qi-opladning. Placer telefonen på opladningspad'en igen. Fjern de tykke telefoncovers. |
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | FNNEMGE |
| Modelnummer | FG602 |
| Peak Output Current | 6000 Amps |
| Batterikapacitet | 26800mAh |
| Produktdimensioner | 3.9" D x 5.1" B x 9.9" H |
| Varens vægt | 2.51 pund (1.14 kilo) |
| Batteritype | Lithiumpolymer (1 påkrævet, inkluderet) |
| Trådløs opladningsoutput | 10W |
| USB udgang | USB Quick Charge 3.0, USB 2.0 |
| DC-udgang | 12V EC-5 |
| LED-lystilstande | Flashlight, Strobe, SOS, Red Blue Warning |
10. Garanti og support
FNNEMGE products are manufactured to high-quality standards. In case of product malfunction or any issues, please do not hesitate to contact our customer service team. We are committed to providing good after-sales service.
For support, please contact us via email:
Please have your product model number (FG602) and purchase details ready when contacting support.
