Produkt overview
The Orbit Programmable Hose Faucet Timer is designed to automate your watering schedule, providing convenience and water conservation. This 2-outlet timer allows you to control two separate watering zones from a single faucet. Its large, easy-to-read LCD screen and intuitive dial make programming simple. Key features include flexible scheduling options, a rain delay function, and the ability to manually bypass programmed watering without interruption.
Billede: Forside view of the Orbit 2-Outlet Hose Faucet Timer, showing the digital display, control dial, and buttons.
Opsætning
- Batteri installation: The timer requires two AA batteries (not included). Open the battery compartment on the back of the unit, insert the batteries, ensuring correct polarity, and securely close the compartment.
- Tilslutning til vandhane: Screw the timer onto any standard outdoor faucet. Ensure the connection is hand-tight to prevent leaks. Do not overtighten.
Image: The Orbit 2-Outlet Hose Faucet Timer securely attached to an outdoor garden faucet, with hoses connected to its two outlets.
- Tilslutningsslanger: Attach your garden hoses or watering systems to the two outlets at the bottom of the timer.
- Tænd for vandet: Fully open the faucet to which the timer is connected. The timer will regulate the water flow.
Betjeningsvejledning
The timer features a large dial for selecting programming modes and intuitive buttons for adjustments.
Billede: En detaljeret view of the timer's rotary dial, showing settings like SET CLOCK, START TIME, HOW LONG, HOW OFTEN, OFF, and AUTO.
Image: A close-up of the timer's control buttons, including plus (+), minus (-), STATION, and MANUAL/CLEAR.
1. Indstil uret
- Drej drejeknappen til SÆT UR.
- Brug + og - knapper for at indstille det aktuelle klokkeslæt.
- Tryk på STATION button to switch between outlets if programming them individually (though this model typically programs both simultaneously for time settings).
2. Starttid
- Drej drejeknappen til STARTTID.
- Brug + og - buttons to set your desired watering start time.
3. How Long (Watering Duration)
- Drej drejeknappen til HVOR LÆNGE.
- Brug + og - buttons to set the watering duration from 1 to 240 minutes.
4. How Often (Watering Frequency)
- Drej drejeknappen til HVOR OFTE.
- Brug + og - buttons to set the watering frequency from every 6 hours up to every 7th day.
5. Regnforsinkelsesfunktion
- Drej drejeknappen til AUTO.
- Tryk på + button to activate the rain delay. Each press will cycle through 24, 48, or 72 hours of delay. The timer will resume its schedule after the delay period.
6. Manuel vanding
- Drej drejeknappen til AUTO.
- Tryk på MANUEL/RYD knap.
- Brug + og - knapperne til at indstille den ønskede manuelle vandingsvarighed.
- Trykke MANUEL/RYD again to start manual watering. To stop manual watering, press MANUEL/RYD once more. This function does not interrupt your programmed schedule.
7. Slukning
- Drej drejeknappen til SLUKKET to stop all automatic watering.
Opretholdelse
- Udskiftning af batteri: Replace batteries annually or when the low battery indicator appears on the display. Always use fresh AA alkaline batteries.
- Rensning: Rengør timerens yderside regelmæssigt med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Vinterisering: Before the first frost, remove the timer from the faucet and drain any remaining water. Store the timer indoors in a dry, protected area where temperatures remain above 32°F (0°C) to prevent damage from freezing.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Timer does not turn on/display is blank. | Døde eller forkert installerede batterier. | Udskift batterierne med nye AA-batterier, og sørg for at polariteten vender korrekt. |
| Vand strømmer ikke. | Faucet is off; timer is set to OFF; low water pressure; clogged filter. | Ensure faucet is fully open. Turn dial to AUTO. Check water pressure. Clean the filter washer located at the timer's inlet. |
| Timer continuously waters or leaks. | Internal valve malfunction; loose connection. | Ensure connections are hand-tight. If continuous watering persists, the internal mechanism may be faulty. Contact customer support. |
| Programmeret tidsplan kører ikke. | Timer is in OFF or Rain Delay mode; incorrect programming. | Ensure dial is set to AUTO. Check rain delay status. Re-program the schedule carefully following instructions. |
Specifikationer
- Mærke: Orbit
- Modelnummer: 58910
- Produktdimensioner: 5" D x 2" B x 3" H
- Materiale: Plast
- Farve: Grøn
- Antal indstillinger: 15
- Strømkilde: 2 AA batterier (medfølger ikke)
- Varens vægt: 2.54 pund
- Oprindelsesland: Kina
- UPC: 840041546767
Garanti og support
For detailed warranty information and further support, please refer to the official user guide provided by Orbit. A digital version of the user guide can often be found on the product's listing page or the manufacturer's webwebsted.
Du kan få adgang til Brugervejledning (PDF) for more comprehensive instructions and support.
