Adtran NetVanta 1560-48-Port PoE Switch User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADTRAN NetVanta 1560-48-Port, 740 Watt PoE Switch (Model 17108148PF2). This device is a fully managed rack-mountable Ethernet switch designed for enterprise-class networking, offering 48 PoE+ ports and 4 10-Gigabit SFP+ ports for high-speed connectivity. It is suitable for powering network devices such as IP phones, security cameras, and wireless access points.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af udstyret:

• Sørg for korrekt jordforbindelse af enheden.
• Brug ikke kontakten i omgivelser med for høj fugtighed eller ekstreme temperaturer.
• Use only the power supply provided or specified by the manufacturer.
• Undgå at blokere ventilationsåbningerne for at forhindre overophedning.
• Overlad al service til kvalificeret personale.

3. Pakkens indhold

Bekræft, at din pakke indeholder følgende varer:

• ADTRAN NetVanta 1560-48-Port PoE Switch (Model 17108148PF2)
• Strømledning
• Rack-mount Kit
• Dokumentation (hurtigstartguide, sikkerhedsoplysninger)

Hvis der mangler eller er beskadigede varer, skal du straks kontakte din leverandør.

4. Fysisk beskrivelse

The NetVanta 1560-48 is a standard 1U rack-mountable unit. Its front panel features network ports and status indicators, while the rear panel typically includes the power input and cooling fans.

4.1 Frontpanel

Figure 1: Front Panel of the NetVanta 1560-48 Switch

This image displays the front panel of the Adtran NetVanta 1560-48-Port PoE Switch. It features 48 RJ45 Ethernet ports, arranged in two rows, and four 10-Gigabit SFP+ uplink ports on the right side. Status indicator LEDs (Power, System, Link/Act, Speed, PoE) are visible on the left, along with a console port and a USB port.

4.1.1 havne

• 48 x 10/100/1000Base-T Ethernet Ports: RJ45 connectors supporting Power over Ethernet Plus (PoE+).
• 4 x 10-Gigabit SFP+ Ports: For high-speed fiber uplink connections.
• Konsolport: RJ45 for local management access.
• USB-port: For firmware upgrades or configuration backup/restore.

4.1.2 LED-indikatorer

• Power LED: Indikerer strømstatus.
• System LED: Angiver systemets driftsstatus.
• Link/Act-LED'er (pr. port): Angiver netværksforbindelse og -aktivitet.
• Hastigheds-LED'er (pr. port): Indicates connection speed (e.g., 100Mbps, 1Gbps).
• PoE-LED'er (pr. port): Indicates PoE status for the respective port.

5. Opsætning og installation

Follow these steps to properly install and connect your NetVanta 1560-48 switch.

5.1 Rackmontering

1. Fastgør de medfølgende rackmonteringsbeslag til siderne af switchen med de medfølgende skruer.
2. Fastgør kontakten i et standard 19-tommer udstyrsrack med passende rackskruer.

5.2 Strømtilslutning

1. Tilslut netledningen til vekselstrømsindgangen på bagpanelet af kontakten.
2. Sæt den anden ende af netledningen i en jordet stikkontakt.
3. Verify that the Power LED on the front panel illuminates.

5.3 Netværksforbindelser

1. Connect Ethernet cables from your network devices (e.g., computers, IP phones, access points) to the RJ45 ports on the switch.
2. For high-speed uplinks, insert compatible SFP+ transceivers into the SFP+ ports and connect fiber optic cables.
3. Observe the Link/Act and Speed LEDs to confirm successful connections.

6. Betjeningsvejledning

The NetVanta 1560-48 is a managed switch, offering various configuration and monitoring options.

6.1 Førstegangsadgang

The switch can be accessed via a Command Line Interface (CLI) through the console port or via a web-baseret grafisk brugergrænseflade (GUI).

• CLI-adgang: Connect a serial cable from your computer to the switch's console port. Use a terminal emulation program (e.g., PuTTY) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
• Web GUI-adgang: By default, the switch may obtain an IP address via DHCP or have a default static IP. Refer to the Quick Start Guide for the default IP address or DHCP discovery method. Access the GUI by entering the switch's IP address into a web browser.

6.2 Grundlæggende konfiguration

Upon initial access, it is recommended to:

• Change the default administrator password.
• Configure the management IP address.
• Indstil systemets tid og dato.
• Enable necessary management protocols (e.g., SNMP, SSH, HTTPS).

6.3 PoE-drift

The switch provides 740 Watts of total PoE+ power. Connected PoE-compatible devices will automatically receive power upon connection, provided the port is enabled for PoE and sufficient power is available.

• Monitor PoE status via the front panel LEDs or the management interface.
• Configure PoE settings (e.g., power priority, power limits) through the switch's management interface.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din switch.

7.1 firmwareopdateringer

Periodically check the ADTRAN support website for the latest firmware versions. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware package for a safe update process.

7.2 Rengøring

• Sørg for, at kontakten er slukket og frakoblet strømkilden før rengøring.
• Brug en blød, tør klud til at tørre ydersiden af ​​kontakten af.
• Use compressed air to clear dust from ventilation openings and ports.
• Brug ikke flydende eller aerosolrengøringsmidler.

7.3 Miljøhensyn

Maintain the operating environment within specified temperature and humidity ranges to prevent hardware failure.

8. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

8.1 Ingen strøm

• Symptom: Strøm-LED er slukket.
• Handling:
  • Kontroller, at netledningen er korrekt tilsluttet både afbryderen og stikkontakten.
  • Kontroller stikkontakten med en anden enhed for at sikre, at den fungerer.
  • Sørg for, at tænd/sluk-knappen (hvis den er monteret) er i 'ON'-positionen.

8.2 No Network Link

• Symptom: Link/Act LED for a port is off.
• Handling:
  • Sørg for, at Ethernet-kablet er korrekt tilsluttet i begge ender.
  • Prøv et andet Ethernet-kabel.
  • Kontroller, at den tilsluttede enhed er tændt og fungerer korrekt.
  • Check port configuration in the switch's management interface.

8.3 PoE Device Not Powering On

• Symptom: PoE-compatible device does not receive power.
• Handling:
  • Verify the device is PoE-compatible (802.3af/at).
  • Check the PoE LED for the port; if off, ensure PoE is enabled for that port in the switch configuration.
  • Ensure the total PoE power budget (740W) of the switch is not exceeded.
  • Prøv at tilslutte enheden til en anden PoE-port.

9. Specifikationer

Key technical specifications for the ADTRAN NetVanta 1560-48-Port PoE Switch:

10. Garanti og support

For warranty information and technical support, please refer to the official ADTRAN website or contact your authorized ADTRAN reseller. Keep your purchase receipt for warranty claims.

ADTRAN Support: www.adtran.com/support