Indledning
The Blackmagic Design HyperDeck Studio HD Plus is a professional broadcast deck designed for recording and playback of video. It includes advanced features such as 6G-SDI connectivity, allowing for recording and playback of ProRes up to Ultra HD 30 frames per second. This model also supports HDR (High Dynamic Range) and includes an SDI loop out. Its dual 6G-SDI outputs enable fill and key playback up to 1080p60. For monitoring, it provides an HDMI input and a dedicated 3G-SDI monitoring output with overlays. The unit features an upgraded front panel with improved transport control buttons, a headphone socket, and a built-in speaker. All front panel button presses are sent to a dedicated RS-422 remote output, and the DC power input is a broadcast-style XLR connector.
Image: The Blackmagic Design HyperDeck Studio HD Plus Recorder, shown with the included 6 ft power cord and a 5-pack of Solid Signal cable ties.
Hvad er inkluderet
Din pakke skal indeholde følgende varer:
- Blackmagic Design HyperDeck Studio HD Plus Recorder
- 6 fod strømledning
- 5-Pack Solid Signal Cable Ties
Image: The included 6 ft power cord and the 5-pack of Solid Signal cable ties.
Opsætningsvejledning
Follow these steps to set up your HyperDeck Studio HD Plus Recorder:
- Strømtilslutning: Connect the included 6 ft power cord to the broadcast-style XLR connector on the rear of the HyperDeck Studio HD Plus. Plug the other end into a suitable power outlet.
Image: Rear panel of the HyperDeck Studio HD Plus, highlighting the power input and various video/audio connections.
- Videoindgang: Connect your video source to the HyperDeck using either the 6G-SDI input (BNC) or the HDMI 2.0 Type A input. This model supports ProRes recording up to Ultra HD 30fps via 6G-SDI.
Note: Ensure your source device is compatible with the HyperDeck's supported video standards.
- Video Output (Monitoring): For monitoring, connect a display to the dedicated 3G-SDI monitoring output (BNC) or the HDMI Type A 2.0 output. This output can display overlays.
- Opbevaring: Insert an SD card or connect an external disk via the USB Type-C port for recording. The unit supports recording of SD, HD, and 2K DCI formats.
- Timecode & Reference: If synchronizing with other equipment, connect timecode and reference signals to the respective BNC inputs/outputs.
- Netværksforbindelse (valgfrit): Connect an Ethernet cable for network control or file transfer, if supported by your workflow.
Betjeningsvejledning
The HyperDeck Studio HD Plus features an intuitive front panel for easy operation.
Image: Front panel of the HyperDeck Studio HD Plus, displaying the transport controls, LCD screen, and input/menu buttons.
Kontrol på frontpanelet:
- Transportknapper: Brug REC (rød), SPIL (grøn), STOP (blå), REW, FFWD, og SPRINGE buttons for media control.
- LCD skærm: Displays video preview, timecode, recording status, and menu options.
- Input knap: Selects the active video input source.
- Menu-knap: Giver adgang til systemindstillinger og konfigurationsmuligheder.
- Search Knob: Navigates through media and menu options.
- Hovedtelefonstik: Til lydovervågning.
- Indbygget højttaler: Provides basic audio monitoring.
Indspilning:
- Ensure a formatted storage medium (SD card or external disk) is inserted/connected.
- Select the desired input source using the INPUT knap.
- Tryk på REC knappen for at starte optagelsen. REC-indikatoren lyser.
- Tryk på STOP knappen for at afslutte optagelsen.
Afspilning:
- Brug SØGE knob to navigate to the desired clip.
- Tryk på SPIL knappen for at starte afspilning.
- Bruge REW, FFWD, og SPRINGE knapper til navigation.
- Tryk på STOP for at stoppe afspilning.
USB Webcam Feature:
The USB Type-C port allows the HyperDeck Studio HD Plus to function as a webcam. Connect the unit to your computer via USB-C, and it will be recognized as a video input device. This feature is compatible with video conferencing software like Zoom, Microsoft Teams, and Skype, as well as live streaming applications such as Open Broadcaster and XSplit Broadcaster.
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Ventilation: Ensure the ventilation grilles are clear of obstructions to prevent overheating.
- Firmwareopdateringer: Periodically check the Blackmagic Design webwebsted for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.
- Opbevaring: Når enheden ikke er i brug, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Netledningen er ikke tilsluttet; Problem med stikkontakten. | Ensure power cord is securely connected to the unit and a working power outlet. |
| No Video Input Detected | Incorrect input selected; Cable issue; Source device not outputting signal. | Verify correct input is selected on the HyperDeck. Check video cables and ensure source device is powered on and outputting video. |
| Recording Fails | Storage full; Incorrect media format; Media speed too slow. | Check available storage space. Ensure media is formatted correctly (e.g., ExFAT). Use recommended high-speed media for recording high-resolution formats. |
| Ingen lyd | Audio not embedded in video signal; Volume too low. | Verify audio is present in the input video signal. Adjust volume on monitoring device or HyperDeck. |
Specifikationer
| Feature | Detalje |
|---|---|
| Model | HYPERD/ST/DCHP |
| Mærke | Blackmagic Design (via Solid Signal) |
| Videoindgange | 1 x BNC, 6G-SDI; 1 x HDMI 2.0 Type A |
| Videoudgange | 1 x BNC, 6G-SDI Loop-Out; 2 x BNC, 6G-SDI; 1 x HDMI Type A, 2.0; 1 x BNC, 3G-SDI (Monitor Out) |
| Andre havne | 1 x USB Type-C (Webcam or External Recording); Timecode In/Out (BNC); Reference In (BNC); Ethernet; Remote In/Out (RS-422) |
| Supported Recording Formats | ProRes up to Ultra HD 30fps (via 6G-SDI); SD, HD, 2K DCI |
| HDR-understøttelse | Ja |
| Dimensioner | 16 cm L x 12 cm B x 4 cm H (ca.) |
| Varens vægt | 4.33 pund (ca.) |
Garantioplysninger
For detailed warranty information regarding your Blackmagic Design HyperDeck Studio HD Plus Recorder, please refer to the official documentation provided by Blackmagic Design or visit their official webGarantibetingelserne dækker typisk fabrikationsfejl i en bestemt periode fra købsdatoen.
Note: This product is bundled by Solid Signal. Any specific warranty claims related to the bundle components (power cord, cable ties) should be directed to Solid Signal.
Støtte
For technical support, driver downloads, and the latest firmware updates for your Blackmagic Design HyperDeck Studio HD Plus, please visit the official Blackmagic Design support page:
For inquiries related to the Solid Signal bundle components or purchase, please contact Solid Signal customer service.
