YAOHUIMI A420210928-(R51)-561

YAOHUIMI brugermanual til udskiftning af fjernbetjening

For Midea AC Air Conditioner Models: MSAGBU-18HRFN8-QRD1GW, MSAGDU-24HRFN8-QRD0GW, MSAGBU-09HRFN8-QRD1GW(GA), MSAGBU-12HRFN8-QRD1GW(GA), RG10A10(B2S)/BGEF

1. Introduktion

This manual provides instructions for the operation and maintenance of your YAOHUIMI replacement remote control. This remote is designed to be compatible with specific Midea AC Air Conditioner models. Please verify your air conditioner model number against the list provided to ensure compatibility.

Important Note: This is not a universal remote control. Compatibility is limited to the specified Midea AC models.

2. Produktet er slutview

The YAOHUIMI replacement remote control offers direct functionality for your Midea AC unit. Key features include:

  • Dobbelt temperaturdisplay: Shows temperature in both Fahrenheit (°F) and Celsius (°C).
  • Grøn baggrundsbelysning: Enhances visibility and ease of operation in low-light conditions.
  • Direkte kompatibilitet: Pre-programmed for specific Midea AC models, requiring no setup.
YAOHUIMI Replacement Remote Control with green backlight display

Billede 1: Forside view of the YAOHUIMI replacement remote control, showing the green backlit display and various function buttons.

3. Opsætning og batteriinstallation

Denne fjernbetjening kræver to AAA-batterier (medfølger ikke).

  1. Åbent batterirum: Locate the battery compartment cover on the back of the remote control. Slide the cover downwards or press the latch and lift to open.
  2. Indsæt batterier: Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  3. Luk batterirummet: Replace the battery compartment cover by sliding it back into position until it clicks securely.

No programming is required. The remote is ready for use once batteries are installed.

Close-up of the remote control's green backlit display

Billede 2: Et nærbillede view highlighting the green backlight feature of the remote control's display, indicating enhanced visibility.

4. Betjeningsvejledning

Gør dig bekendt med knapperne og deres funktioner:

KnapFungere
ON/OFFTænder eller slukker klimaanlægget.
MODESkifter mellem driftstilstande: AUTO, KØLING, TØRRING, VARME.
TEMP ▲ / ▼Justerer den ønskede temperaturindstilling.
BLÆSERHASTIGHEDAdjusts fan speed: HIGH, MED, LOW.
SWINGControls the vertical louver swing function.
SOVEActivates/deactivates sleep mode for energy-efficient operation.
TIMER TIL / TIMER FRASets the timer for the unit to turn on or off automatically.
NULSTIL LÅSResets settings or locks the remote to prevent accidental changes.
LED DISPLAYToggles the display light on the AC unit.
TURBOActivates rapid cooling or heating.
LUFT RETNINGAdjusts the horizontal louver direction.
Remote control highlighting Fahrenheit and Celsius display options

Image 3: Illustration showing the remote control's capability to display temperature in both Fahrenheit and Celsius, with a conversion graphic.

5. Vedligeholdelse

  • Rensning: Tør fjernbetjeningen af ​​med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.
  • Udskiftning af batteri: Replace batteries when the remote's display becomes dim or the remote stops responding. Always replace both batteries at the same time with new ones of the same type.
  • Opbevaring: Hvis fjernbetjeningen ikke skal bruges i længere tid, skal batterierne tages ud for at forhindre lækage.

6. Fejlfinding

ProblemLøsning
Fjernbetjeningen svarer ikke.
  • Kontroller batteriets orientering.
  • Udskift batterierne med nye.
  • Ensure there are no obstructions between the remote and the AC unit's receiver.
Skærmen er svag eller tom.Udskift batterierne.
AC unit does not respond to commands.
  • Confirm the remote is compatible with your specific Midea AC model.
  • Ensure the remote is pointed directly at the AC unit.
  • Check if the AC unit is powered on.

7. Specifikationer

  • Modelnummer: A420210928-(R51)-561
  • Mærke: YAOHUIMI
  • Strømkilde: 2 x AAA batterier (medfølger ikke)
  • Kompatibilitet: Specific Midea AC Air Conditioner models (e.g., MSAGBU-18HRFN8-QRD1GW, MSAGDU-24HRFN8-QRD0GW, MSAGBU-09HRFN8-QRD1GW(GA), MSAGBU-12HRFN8-QRD1GW(GA), RG10A10(B2S)/BGEF)
  • Funktioner: Fahrenheit/Celsius display, Green Backlight

8. Garanti og support

For garantioplysninger eller teknisk support henvises til sælgerens kontaktoplysninger, som du oplyste ved køb. Gem din købskvittering som købsbevis.

Manufacturer: HUIMIKEJI

Relaterede dokumenter - A420210928-(R51)-561

Preview Invacare Nutron el-kørestol reservedelskatalog - R32, R51-serien
Find detailed part numbers, diagrams, and assembly information for Invacare Nutron power wheelchairs, including models R32, R32 LX, R50 LX, R51, R51 LX, R51 LXP, and RWD. Essential for maintenance and repair.
Preview R50&R51 Betjeningsvejledning - Fujian Youtong Industries
Betjeningsvejledning og tekniske specifikationer for Fujian Youtong Industries R50&R51 trådløse sender, med detaljerede oplysninger om funktioner, betjeningsprocedurer og FCC-overholdelse.
Preview Thule Thru Axle Adapter 561-1 for Thule OutRide 561: Installation Instructions
Detailed instructions for installing the Thule Thru Axle Adapter 561-1 onto a Thule OutRide 561 bike rack. Includes product specifications, dimensions, and step-by-step visual guidance.
Preview IKEA NARRÖN Upholstered Bed Frame Assembly Instructions
Comprehensive assembly guide for the IKEA NARRÖN upholstered bed frame, detailing parts, tools, and step-by-step instructions with textual descriptions of diagrams.
Preview Midea Control System Technical Service Manual: Remote Controllers and Accessories
Detailed technical service manual for Midea control systems, covering various wireless remote controllers (RM02, R05, RM05, R51, etc.), wired controllers, centralized controllers, gateways, and accessories. Includes specifications, performance features, and operational instructions.
Preview Installationsvejledning til STid SPECTRE nano UHF- og Bluetooth®-læser
Omfattende installationsvejledning til STid SPECTRE nano UHF & Bluetooth®-læseren, der dækker tekniske specifikationer, monteringsvejledning, ledningsføring, konfiguration og overholdelse af regler.