Indledning
This manual provides essential information for the safe and efficient operation of your SMACO High-Pressure Air Compressor. Please read this manual thoroughly before using the compressor to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
Figur 1: SMACO High-Pressure Air Compressor. This image shows the compact black unit with orange "SMACO X" branding on the fan cover, a pressure gauge, control knobs, and power switches. It also displays the high-pressure hose and battery clamps for 12V DC connection.
Sikkerhedsoplysninger
Always observe the following safety precautions to reduce the risk of injury or damage to the compressor:
- Sørg for, at kompressoren er placeret på en stabil, plan overflade under drift.
- Brug ikke kompressoren i våde omgivelser eller i nærheden af brandfarlige materialer.
- Brug altid passende øjenbeskyttelse, når du bruger kompressoren.
- Do not exceed the maximum pressure rating of 4500 PSI (300 Bar / 30 MPa).
- Allow the compressor to cool down for 10 minutes after 25 minutes of continuous operation.
- Hold børn og kæledyr væk fra kompressoren under drift.
- Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
Produkt overview og funktioner
The SMACO High-Pressure Air Compressor is designed for versatility and portability, suitable for various high-pressure air applications.
- Integrated Power Adapter: Built-in transformer for direct connection to 110V/220V AC outlets or 12V DC car batteries.
- Automatic Pressure Shut-off: Stopper automatisk oppustningen, når det forudindstillede tryk er nået.
- Oliefri design: Eliminates the need for oil, ensuring clean and dry air output.
- Ventilator kølesystem: Efficient cooling to maintain optimal operating temperature.
- Water/Oil Separator: Filters out moisture and oil from the compressed air.
- Kompakt og bærbar: Lightweight design with a convenient wire spool for easy transport and storage.
Figur 2: Portability of the SMACO Air Compressor. This image illustrates the compact size of the compressor, being held by a person, with dimensions of approximately 10 inches (height), 8.7 inches (depth), and 9.5 inches (width), highlighting its portability and integrated wire spool design.
Figur 3: Fan Cooling System. This image shows the internal fan cooling system of the compressor, emphasizing its oil-free operation and integrated oil-moisture filter. It also reminds users of the 25 minutes run / 10 minutes cool duty cycle.
Ansøgninger
The SMACO High-Pressure Air Compressor is suitable for inflating various high-pressure air devices, including:
- PCP Airguns
- Paintball Tanks
- Mini Scuba Tanks
Figur 4: Wide Range of Applications. This image displays the compressor's versatility, showing it being used for paintball airguns, PCP rifles, and mini scuba tanks, with approximate inflation times for different tank sizes (0.5L, 1.0L, 2.0L) to 200 bar.
Opsætning
Before operating the compressor, ensure proper power connection and preparation.
Strømforsyningsforbindelse:
The compressor supports both 12V DC and 110V/220V AC power sources.
- Til 12V DC (bilbatteri): Tilslut den røde clamp til den positive (+) pol på dit bilbatteri og den sorte terminalamp to the negative (-) terminal. Ensure your car engine is running to provide stable power.
- For 110V/220V AC (Household Outlet): Plug the integrated power cord directly into a standard wall outlet. The compressor has a built-in power adapter.
Figur 5: Convenient Power Supply. This image illustrates the two power options: connecting to a 12V car battery (with the car running) and plugging into a 110V/220V AC home outlet, demonstrating the integrated power adapter.
Betjeningsvejledning
Følg disse trin for sikker og effektiv drift:
- Tilslut strøm: Select the appropriate power source (12V DC or 110V/220V AC) and connect the compressor. Ensure the AC voltage switch (if applicable) is set correctly (110V is default).
- Tilslut lufttank: Securely connect the high-pressure hose from the compressor to your air tank (PCP airgun, paintball tank, or mini scuba tank). Ensure all connections are tight to prevent leaks.
- Spænd udluftningsventilen: Ensure the bleed valve (usually a knob on the side) is fully tightened before starting inflation.
- Indstil ønsket tryk: Use the pressure setting knob to set your target pressure. The compressor will automatically stop when this pressure is reached. The maximum setting is 4500 PSI (300 Bar).
- Start inflation: Turn on the main power switch, then press the "START" button. The compressor will begin filling the tank.
- Monitordrift: Observe the pressure gauge during inflation. The compressor will automatically shut off when the preset pressure is achieved.
- Efter påfyldning: Once the compressor stops, turn off the main power switch. Slowly loosen the bleed valve to release residual pressure from the hose before disconnecting the air tank.
- Køl ned: Allow the compressor's fan to run for 2-3 minutes after operation to aid cooling, then turn off the fan.
Figur 6: Intelligent Pressure System. This image highlights the automatic pressure setting and shut-off feature, showing a user relaxing while the compressor inflates a tank, with a close-up of the pressure gauge indicating the automatic stop function.
Figur 7: Detailed Operation Steps. This image provides a four-step visual guide to operating the compressor: 1) Connecting power (AC or DC), 2) Tightening the bleed valve and connecting the hose to the air tank, 3) Setting the air pressure and starting inflation, and 4) Post-filling procedures including turning off the compressor, loosening the bleed valve, disconnecting the hose, and turning off the fan.
Opretholdelse
Regelmæssig vedligeholdelse sikrer din kompressors levetid og optimale ydeevne.
- Køling: Adhere to the duty cycle of 25 minutes run time followed by 10 minutes cool down. This prevents overheating and extends the life of the compressor.
- Oil-Free System: This compressor is oil-free, eliminating the need for oil changes.
- Filtervedligeholdelse: The dual filtration system (5µm fiber and activated carbon) helps ensure clean, dry air. Periodically check and replace filter elements as needed to maintain air quality.
- Rensning: Keep the exterior of the compressor clean and free of dust and debris. Ensure the fan vents are unobstructed for proper airflow.
- Opbevaring: Opbevar kompressoren et tørt, køligt sted væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
If you encounter issues with your SMACO compressor, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Kompressoren starter ikke. | Ingen strøm, løs forbindelse, strømafbryder slukket. | Check power source, ensure connections are secure, turn on power switch. |
| Kompressoren stopper for tidligt. | Preset pressure reached, overheating, power interruption. | Check preset pressure, allow unit to cool down, verify stable power supply. |
| Luftlækage fra forbindelser. | Loose hose connections, worn O-rings. | Spænd alle forbindelser, inspicer og udskift O-ringe, hvis de er beskadigede. |
| Langsom inflation. | Clogged filter, low power supply. | Check and replace filter elements, ensure adequate power (e.g., car engine running for 12V DC). |
If the problem persists, contact SMACO customer support for assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | HEAP1 |
| Dimensioner (L x B x H) | 9.5 x 5.6 x 10 cm (ca. 3.7 x 2.2 x 3.9 tommer) |
| Vægt | 9.7 kg (ca. 21.4 lbs) |
| Strømkilde | 12V DC (car battery), 110V/220V AC (household electricity) |
| Wattage | 250 W |
| Max tryk | 4500 PSI / 30 MPa / 300 bar |
| Støjniveau | 70 dB |
| Kølesystem | Ventilator køling |
| Filtrering | Oil-free, 5µm fiber filter, activated carbon |
| Duty Cycle | 25 minutes run / 10 minutes cool |
Garanti og support
For warranty information or technical support, please contact SMACO customer service. Keep your purchase receipt as proof of purchase.
Note: Specific warranty terms may vary by region and retailer. Please refer to the documentation provided at the time of purchase or contact SMACO directly for details.
