Indledning
This manual provides comprehensive instructions for the setup, operation, and maintenance of your TASCO Low Glow 12 Mega Pixels Trail Camera. Designed for reliability and ease of use, this camera captures high-quality images and 720P video, making it an excellent tool for wildlife monitoring, hunting, and security surveillance.
Figur 1: Forside view of the TASCO Low Glow 12 MP Trail Camera, showcasing its compact design and IR flash array.
Nøglefunktioner:
- Crystal Clear 12 Mega Pixel Images: Capture high-resolution still photographs.
- 720P Video Recording: Record clear video footage.
- PIR Motion Sensor with 70FT Range: Detects movement up to 70 feet away for automatic capture.
- 70FT Low Glow IR Flash: Provides illumination for night captures without startling wildlife, with a range of up to 70 feet.
- Lang batterilevetid: Operates for up to 12 months on 8 AA batteries (not included).
- Holdbart design: IP67 International Protection Rating ensures resistance to dust and water.
Hvad er der i æsken
Upon unpacking your TASCO Trail Camera, please verify that all components are present and in good condition:
- TASCO Low Glow 12 MP Trail Camera (OD Green)
- Monteringsstrop
Figure 2: Contents of the box, including the trail camera and the mounting strap.
Opsætning
1. Batteriinstallation
- Åbn låsen på kamerahuset.
- Find batterirummet.
- Insert 8 new AA alkaline or lithium batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Luk batterirummet forsvarligt.
2. Indsættelse af SD-kort
- Find SD-kortstikket med kamerahuset åbent.
- Insert a formatted SD card (up to 32GB, Class 10 recommended) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- For at fjerne det skal du skubbe kortet let ind, indtil det springer ud.
3. Montering af kameraet
- Select a suitable location for your camera, such as a tree or post, ensuring a clear view af det ønskede område.
- Før den medfølgende monteringsrem gennem rillerne på bagsiden af kameraet.
- Securely fasten the strap around the mounting surface. Adjust the camera angle as needed.
Operating Your Trail Camera
1. Tænd/sluk
- To power on, slide the power switch to the 'ON' position. The indicator light will briefly illuminate.
- For at slukke skal du skubbe tænd/sluk-knappen til 'OFF'-positionen.
2. Valg af tilstand
The camera typically features different operating modes, such as Photo, Video, or Photo+Video. Refer to the on-screen menu (if available) or physical switch to select your desired capture mode.
3. PIR-bevægelsessensor
The Passive Infrared (PIR) sensor detects heat and motion within its 70-foot range. When motion is detected, the camera will trigger and capture an image or video according to your selected settings.
4. Low Glow IR Flash
For night captures, the camera utilizes a 70-foot Low Glow IR flash. This technology emits infrared light that is nearly invisible to the human eye and most animals, allowing for discreet night photography and videography.
Figur 3: Eksample of a daytime image captured by the trail camera, showing a deer in its natural habitat.
Figur 4: Eksample of a nighttime image captured by the trail camera, demonstrating the effectiveness of the Low Glow IR flash.
5. ViewOptagede medier
Til view images and videos, remove the SD card from the camera and insert it into a compatible device such as a computer or an SD card reader. Navigate to the DCIM folder on the SD card to access your media files.
Opretholdelse
1. Rensning
- Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Rengør kamerahuset med reklameamp klud efter behov.
2. Batteripleje
- Replace all batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
- Fjern batterierne, hvis kameraet ikke skal bruges i længere tid, for at forhindre lækage.
3. Opbevaring
- Opbevar kameraet et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Kameraet tænder ikke | Incorrect battery installation; Dead batteries; Corrupted SD card. | Check battery polarity; Replace all batteries; Remove SD card and try powering on. |
| Dårlig billed-/videokvalitet | Dirty lens/sensor; Low light conditions; Object too far/close. | Clean lens and sensor; Ensure adequate lighting or proper IR flash usage; Adjust camera placement. |
| Video not playing on mobile devices (e.g., Apple products) | Video format incompatibility (AVI); Device limitations. | Use a computer to view videos; Convert video files to a compatible format; Use a dedicated SD card reader for your mobile device. |
| Kort batterilevetid | Frequent triggers; Cold weather; Low-quality batteries. | Reduce trigger sensitivity; Use lithium batteries in cold weather; Use high-quality alkaline or lithium batteries. |
Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Effektiv stillopløsning | 12 MP |
| Videooptagelsesopløsning | 720p |
| Videooptagelsesformat | AVI |
| PIR bevægelsessensor rækkevidde | 70 FT |
| IR flash rækkevidde | 70 FT (Low Glow) |
| Strømkilde | 8 x AA batterier (medfølger ikke) |
| Forbindelsesteknologi | Trådløs (Wi-Fi) |
| International Protection Rating | IP67 |
| Produktmål (L x B x H) | 6 x 4 x 3 tommer |
| Varens vægt | 12 ounce |
| Farve | OD Green |
| Inkluderede komponenter | Rem |
Garanti og support
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your product packaging or visit the official Vikeri webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
For additional assistance, you may also contact the manufacturer, Tasco, directly through their official support channels.
