GYS 059856 Malingtykkelsesmåler Brugermanual

1. Introduktion

This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.

Læs venligst denne vejledning grundigt, før du betjener enheden, og gem den til fremtidig reference.

2. Sikkerhedsoplysninger

• Sørg altid for, at enheden er ren og tør før brug.
• Udsæt ikke enheden for ekstreme temperaturer, fugt eller direkte sollys.
• Undgå at tabe eller udsætte enheden for kraftige stød.
• Forsøg ikke selv at skille enheden ad eller reparere den. Kontakt kvalificeret personale for service.
• Opbevar enheden utilgængeligt for børn.
• Bortskaf batterier ansvarligt i henhold til lokale regler.

3. Produktet er slutview

The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.

Figur 1: Forside view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.

3.1 nøglekomponenter

• LCD-skærm: Shows measurement readings, units, and mode indicators.
• MODE knap: Used to switch between measurement modes (Single, Continuous, Differential).
• UNIT knap: Used to switch between metric (µm) and imperial (mils) units.
• NUL knap: Used for zero calibration and powering the device on/off.
• Målesonde: Located at the bottom of the device, used to contact the surface for measurement.

4. Opsætning

4.1 Batteriinstallation

Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.

4.2 Tænd/sluk

Tryk og hold på NUL button to power on the device. To power off, press and hold the NUL button again. The device also features an automatic shut-off function to conserve battery life.

5. Betjeningsvejledning

The GYS 059856 offers three measurement modes and supports both metric and imperial units.

5.1 Selecting Measurement Units

Tryk på ENHED button to toggle between metric (µm) and imperial (mils) units.

5.2 Måletilstande

Tryk på MODE button to cycle through the following measurement modes:

• Enkelt måletilstand: Takes a single reading each time the probe is placed on the surface.
• Kontinuerlig måletilstand: Continuously takes readings as the probe is moved across the surface.
• Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.

5.3 Tage en måling

1. Ensure the surface to be measured is clean and free of debris.
2. Select the desired measurement unit and mode.
3. Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
4. Read the thickness value displayed on the LCD screen.
5. Lift the device from the surface to prepare for the next measurement (in Single mode).

6. Kalibrering

Accurate measurements depend on proper calibration. The device supports three calibration functions:

6.1 Nulkalibrering

This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the NUL knap).

6.2 To-punkts kalibrering

This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.

6.3 Easy Calibration

Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.

Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.

7. Vedligeholdelse

• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
• Probepleje: Keep the measurement probe clean and free from scratches or damage.

8. Fejlfinding

9. Specifikationer

• Model: GYS 059856
• Fabrikant: gys
• Produktmål (L x B x H): 10.5 x 6.1 x 2.8 cm
• Vægt: 137 gram
• Måleprincip: Non-magnetic coating on metallic surfaces
• Måleenheder: Metric (µm), Imperial (mils)
• Måletilstande: Single, Continuous, Differential
• Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
• Automatisk slukning: Ja
• ASIN: B09GS7G1N4
• Producentreference: 059856
• Tilgængelighed af reservedele: Information ikke tilgængelig

10. Garanti og support

For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.

GYS Official Webwebsted: www.gys.fr