Yaheetech 1

Yaheetech klassisk metalplatformssengestel

Model: 1 - Twin Size, White

Vigtige sikkerhedsoplysninger

Be cautious when assembling the high headboard to prevent injury. Be aware of sharp edges on the metal frame. Do not exceed the weight capacity of 300 pounds. Always ensure all bolts and connections are securely tightened before use. Keep small parts away from children during assembly.

Pakkens indhold

Før monteringen påbegyndes, skal du kontrollere, at alle nedenstående komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

  • Sengegavl
  • Fodplade
  • Sideskinner (2)
  • Metallameller (12)
  • Centerstøtteben
  • Hardwarepakke (bolte, skiver, møtrikker, unbrakonøgle)
  • Installationsmanual

Monteringsvejledning

This bed frame is designed for quick assembly. All necessary hardware and tools are provided. Please follow these steps carefully for proper setup.

  1. Trin 1: Udpak og identificer delene

    Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part by comparing it to the parts list in the included installation manual.

    All components of the Yaheetech bed frame laid out on the floor before assembly.

    Image: All components of the bed frame are laid out, including the headboard, footboard, side rails, and hardware.

  2. Trin 2: Fastgør sideskinner til hovedgærde og fodgærde

    Connect the side rails to the headboard and footboard using the provided bolts and the Allen wrench. Ensure the L-shaped plates are correctly aligned for a stable structure. Do not fully tighten bolts until all connections are made.

    Close-up of a bed frame joint being secured with a bolt and Allen wrench.

    Image: A hand tightening a bolt on a bed frame joint using an Allen wrench, illustrating the connection process.

    Diagram showing how to align and secure the metal pipes into the notches for assembly.

    Image: Diagram illustrating the alignment of metal pipes into notches for secure assembly.

  3. Trin 3: Installer midterstøtteben

    Attach the center support legs to the designated points on the middle rail. These legs provide additional stability and support for the mattress.

    View of the bed frame's center support leg and its connection point.

    Billede: Et nærbillede view of the bed frame's center support leg, highlighting its attachment to the main frame.

  4. Step 4: Place Metal Slats

    Lay the metal slats across the side rails. Ensure they are evenly spaced and securely seated in their designated slots. The built-in slats are designed to prevent the mattress from sliding.

    Diagram showing how the mattress sits securely on the built-in slats, preventing sliding.

    Image: A diagram illustrating how the mattress is secured by the built-in slats, preventing movement.

  5. Trin 5: Endelig tilspænding

    Once all components are in place and aligned, go back and fully tighten all bolts. Ensure all connections are firm and secure for optimal stability and safety.

    Detaljeret view of the bed frame's sturdy metal construction and secure connections.

    Image: A close-up showing the robust metal construction and securely fastened joints of the bed frame.

Produktegenskaber

  • Klassisk og romantisk design: Features curved lines and thick tube frames, blending with modern, traditional, farmhouse, and rustic home decors.
  • Stærk og holdbar konstruktion: Fully constructed of metal frame for large load-bearing capacity. Includes 12 metal slats for strong mattress support. Powder-coated surface offers rust and scratch resistance.
  • Design med høj hovedgærde: Provides better head protection and a comfortable sitting place for reading or watching TV.
  • Forbedret sikkerhed: Built with round corners, a smooth finish, and protective footpads. The high footboard helps keep bedding from falling onto the floor.
  • Hurtig montering: Comes with all necessary hardware, tools, and an illustrated manual for easy setup.

Retningslinjer for brug

The Yaheetech Classic Metal Platform Bed Frame is designed for comfortable and stable sleep. Here are some guidelines for its use:

  • Ingen boxmadras nødvendig: Denne platformssengeramme er designet til at understøtte din madras direkte, hvilket eliminerer behovet for en boxmadras.
  • Opbevaring under sengen: The frame offers 12.6 inches of ground clearance, providing ample space for under-bed storage containers to help keep your room tidy.
  • Madrasskompatibilitet: Designed for a Twin size mattress measuring 75" L x 39" W.
  • Vægt kapacitet: Sengestellet har en maksimal vægtkapacitet på 450 kg. Overskrid ikke denne grænse for at sikre produktets sikkerhed og levetid.
Diagram showing the dimensions and under-bed clearance of the Twin size bed frame.

Image: A detailed diagram illustrating the dimensions of the Twin size bed frame, including the 12.6-inch under-bed clearance.

Pleje og vedligeholdelse

For at sikre din Yaheetech-sengerammes lange levetid og udseende, skal du følge disse enkle plejeinstruktioner:

  • Rensning: Tør metalrammen af ​​med en blød kludamp cloth. Avoid using abrasive cleaners or harsh chemicals, as they may damage the powder-coated finish.
  • Regelmæssig inspektion: Kontrollér regelmæssigt alle bolte og forbindelser for at sikre, at de forbliver stramme. Spænd dem igen om nødvendigt for at opretholde stabiliteten og forhindre knirken.
  • Undgå overdreven kraft: Do not jump on the bed or apply excessive force to the frame, as this can cause structural damage.
  • Beskyttende fodpuder: The frame is equipped with protective footpads to prevent scratching floors. Ensure these remain intact.

Fejlfinding

If you encounter any issues with your bed frame, please refer to the common problems and solutions below:

  • Knirkende lyde: If the bed frame squeaks, it is usually due to loose connections. Re-tighten all bolts, especially those connecting the side rails to the headboard and footboard, and the center support legs.
  • Madrasglidende: The bed frame features built-in slats designed to prevent mattress sliding. Ensure your mattress is correctly positioned within the frame. If sliding persists, verify that the mattress size matches the frame's specifications.
  • Ustabilitet/Vinklen: This indicates that some connections may not be fully secure. Review all assembly steps and ensure every bolt is tightened. Check that the center support legs are firmly on the ground.
  • Manglende dele: If you discover any missing parts during assembly, please contact Yaheetech customer support immediately for assistance.

Specifikationer

AttributDetalje
StørrelseTvilling
Produktdimensioner77 cm L x 41.5 cm B x 42 cm H
Speciel funktionIngen boxmadras nødvendig, Opbevaring under sengen, Robust, Knirkebestandig
FarveHvid
Finish TypePulverlakeret
Inkluderede komponenterInstallationsmanual, Hovedgærde, Lameller, Fodgærde
Kompatibel med madrasstørrelse75 cm L × 39 cm B
MærkeYaheetech
MøbelfinishGlat finish
Montering påkrævetJa
Afstand til jord12.6 tommer
Varens vægt32.4 pund
OprindelseslandKina
Varemodelnummer1
Dato først tilgængelig16. september 2021

Garanti og support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Yaheetech webwebsted. Gem din købskvittering i tilfælde af garantikrav.

Relaterede dokumenter - 1

Preview Yaheetech 611805 (TWIN) Sengestel Samlevejledning
Omfattende samlevejledning til Yaheetech 611805(TWIN) sengestellet. Denne vejledning indeholder trinvise instruktioner, delelister og vigtige sikkerhedsoplysninger til samling af din nye seng.
Preview Yaheetech metal twin sengestel (model #591898) monteringsvejledning
Dette dokument indeholder monteringsvejledning til Yaheetech metalsengestel til to enkeltsenge, model nr. 591898. Det indeholder en liste over dele, trinvise monteringsdiagrammer med tekstlige beskrivelser og vigtige sikkerhedsadvarsler.
Preview Yaheetech 611340 Sengeramme Samlevejledning
Omfattende vejledning til samling af Yaheetech 611340 sengestellet. Denne manual indeholder trinvise instruktioner, en liste over dele og sikkerhedsoplysninger til nem installation af din metalseng med en hovedgærde af træ.
Preview Yaheetech metal queensize sengsramme monteringsvejledning (model nr. 611085)
Detaljeret monteringsvejledning til Yaheetech metal queensize-sengramme (modelnr. 611085), inklusive deleliste, sikkerhedsadvarsler og trinvis vejledning til en problemfri opsætning.
Preview Yaheetech 613629 (Fuld) Monteringsvejledning til sengestel
Detaljeret monteringsvejledning til Yaheetech 613629 (Full) sengestel, inklusive stykliste og trinvis vejledning.
Preview Yaheetech Metal Platform Sengestel Installations- og Samlevejledning
Detaljeret installations- og samlevejledning til Yaheetech metalplatformssengeramme. Indeholder deleliste, trinvis vejledning, sikkerhedsadvarsler og kontaktoplysninger.