NVX XMICROLOC4 4-kanals linjeudgangskonverter brugermanual

Indledning

The NVX XMICROLOC4 is a 4-channel line output converter designed to seamlessly integrate aftermarket amplifiers with factory OEM (Original Equipment Manufacturer) stereo systems. This device allows you to add an amplifier to your vehicle's existing audio setup without replacing the factory head unit, providing enhanced sound quality and power for your car audio system.

Nøglefunktioner

• High-Powered 4-Channel Output Converter: The NVX XMICROLOC4 is a 4-channel, 600W line output converter (150W per channel) designed to integrate aftermarket amplifiers with factory OEM stereos.
• Premium Audio Performance: Equipped with a premium input circuit that corrects crossover distortion, this converter ensures clear, accurate signal conversion for optimal sound quality.
• Adjustable Outputs for Custom Tuning: The 6:1 step-down ratio with individual adjustable outputs allows for precise control over the audio signal, enabling fine-tuning for balanced sound.
• Built-in Remote Turn-On Trigger: A 12-volt output for amplifier remote turn-on is integrated, enabling easy amplifier activation whenever the stereo is powered on.
• Kompakt og nem installation: The compact design allows for easy installation in tight spaces, making it a practical solution for adding an amplifier to a factory system.

Produkt overview

Figur 1: Hovedprodukt view of the NVX XMICROLOC4, showing the top panel with the NVX logo, gain adjustment screws, and the multi-color wiring harness extending from the unit.

Figur 2: Top view of the NVX XMICROLOC4, highlighting the four blue gain adjustment screws (labeled 'L' for left and 'R' for right channels) and the NVX branding.

Figur 3: Side view of the NVX XMICROLOC4, clearly showing the four RCA output jacks. Two red jacks indicate right channels, and two white jacks indicate left channels for amplifier tilslutning.

Installationsvejledning

Sikkerhedsforanstaltninger

• Always disconnect the vehicle's negative battery terminal before performing any electrical work to prevent short circuits and damage.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede for at undgå elektriske farer.
• Kontakt en professionel installatør af bilstereo, hvis du er usikker på installationstrinnene.

Mounting the XMICROLOC4

Choose a secure, dry location within the vehicle, such as under the dashboard, behind the stereo, or in the trunk. Ensure the location is away from direct heat sources and allows for adequate ventilation. The compact design of the XMICROLOC4 facilitates installation in tight spaces.

Ledningsforbindelser

1. Indgange på højttalerniveau: Connect the speaker wires from your factory stereo's speaker outputs to the corresponding input terminals on the XMICROLOC4's wiring harness. Ensure correct polarity (positive to positive, negative to negative) for each channel (Front Left, Front Right, Rear Left, Rear Right). Refer to your vehicle's wiring diagram for speaker wire identification.
2. RCA udgange: Connect RCA cables from the XMICROLOC4's RCA output jacks to the input jacks of your aftermarket amplifier. Match the front outputs of the XMICROLOC4 to the front inputs of the amplifier, and the rear outputs to the rear inputs.
3. Fjerntænding: Connect the blue 12-volt remote output wire from the XMICROLOC4's harness to the remote turn-on input terminal of your amplifier. This connection will automatically activate your amplifier when the factory stereo is turned on.
4. Jordforbindelse: Connect the black ground wire from the XMICROLOC4's harness to a clean, unpainted metal surface on the vehicle chassis. A solid ground connection is crucial for optimal performance and to prevent noise.

Betjeningsvejledning

Forstærkningsjustering

The NVX XMICROLOC4 features individual adjustable outputs for each channel, allowing for precise control over the audio signal level. After completing the installation and reconnecting the vehicle's battery:

1. Turn on your factory stereo and aftermarket amplivligere.
2. Set the volume on your factory stereo to approximately 75% of its maximum level.
3. Using a small flat-head screwdriver, slowly adjust the gain controls on the top of the XMICROLOC4 (labeled 'L' and 'R' for each channel pair). Start with the lowest gain setting and gradually increase it until the desired output level is achieved without any audible distortion.
4. The 6:1 step-down ratio helps manage signal levels effectively, ensuring a clean signal to your ampJuster amplifier's gain settings as needed after setting the XMICROLOC4's gains.

Specifikationer

Figur 4: Diagram illustrating the dimensions and key specifications of the NVX XMICROLOC4.

Fejlfinding

Opretholdelse

The NVX XMICROLOC4 is designed for reliable operation with minimal maintenance. To ensure its longevity and optimal performance:

• Hold enheden fri for støv og snavs. Brug en blød, tør klud til rengøring.
• Undgå at udsætte enheden for overdreven fugtighed eller ekstreme temperaturer.
• Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver fastgjorte.

Garanti og support

For information regarding warranty coverage, technical support, or service inquiries, please refer to the official NVX website or contact NVX customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.