Einhell FREELEXO 350 Robot Batteri Plæneklipper Brugermanual

Indledning

This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Einhell FREELEXO 350 Robot Battery Lawn Mower. Please read this manual thoroughly before using the device and keep it for future reference.

Figure 1: Einhell FREELEXO 350 Robot Battery Lawn Mower. This image shows the red and black robotic lawn mower from a front-side angle, highlighting its compact design and robust wheels.

Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af enheden:

• Ensure the work area is clear of obstacles and people, especially children and pets, before operation.
• Do not operate the mower in wet conditions or during rain. The integrated rain sensor will automatically send the mower back to its charging station.
• Regularly inspect the blades for wear and damage. Replace worn blades promptly.
• The mower is equipped with impact, tilt, and lift sensors for safety. Do not attempt to bypass these features.
• Activate the anti-theft PIN code feature to secure your device.
• Always turn off the mower and remove the battery before performing any maintenance or cleaning.

Opsætning og installation

The FREELEXO 350 comes with all necessary installation equipment for lawn sizes up to 350 m². This includes 110 meters of boundary wire, 150 fastening hooks, three replacement blades, and four connecting clips.

1. Installation af afgrænsningskabel

The boundary wire defines the mowing area. Lay the 110 meters of boundary wire around the perimeter of your lawn, securing it with the provided fastening hooks. Ensure the wire is laid flat and taut to prevent tripping hazards and ensure proper mower operation.

Figur 2: Eksample of boundary wire installation. This diagram illustrates how to lay the boundary wire around a lawn area, including obstacles and pathways, to define the mowing zone for the robotic mower.

2. Placering af ladestation

Place the charging station on a flat, level surface within the boundary wire area, preferably in a shaded location with access to a power outlet. Connect the boundary wire ends to the charging station as per the detailed instructions in the full manual.

Figure 3: The charging station for the Einhell FREELEXO 350. This image shows the black charging base where the robotic mower returns to recharge its battery.

3. Initial Battery Charge

Before first use, ensure the 2.0 Ah Power X-Change battery is fully charged. Insert the battery into the mower or charge it directly using a compatible Einhell Power X-Change charger.

Figure 4: Hand inserting the Power X-Change battery into the robotic lawn mower. This image demonstrates the easy access compartment for battery installation and removal.

Betjeningsvejledning

The FREELEXO 350 is designed for autonomous operation, ensuring consistent lawn care.

1. Programmering af klippetider

Mowing times can be programmed in 8 stages using the intuitive keypad on the mower. This allows you to set a schedule that suits your lawn's needs and your personal preferences. A separate program can also be set for mowing additional areas not part of the main lawn.

Figure 5: Close-up of the Einhell FREELEXO 350's control panel. This image shows the buttons for setting mowing times (e.g., 4H, 6H, 8H, 10H) and the central dial for cutting height adjustment.

2. Justering af klippehøjde

The cutting height can be adjusted from 20 mm to 60 mm to achieve your desired lawn length. Use the central dial on the mower's control panel to select the appropriate height setting.

Figure 6: Hand adjusting the cutting height dial on the robotic lawn mower. This image highlights the ease of setting the desired grass length.

3. Automatiske funktioner

• Regnsensor: The integrated rain sensor detects precipitation and automatically sends the mower back to its charging station to protect it from adverse weather.
• Lavt batteri-returnering: When the battery power is low, the mower automatically returns to the charging station to recharge, ensuring continuous operation.
• Sikkerhedssensorer: Impact, tilt, and lift sensors ensure the mower stops or adjusts its operation if it encounters an obstacle, is lifted, or tilted, enhancing safety.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your FREELEXO 350.

1. Udskiftning af kniv

The mower is supplied with three replacement blades. Inspect the blades regularly for sharpness and damage. Dull or damaged blades can affect cutting quality and increase battery consumption. Replace them as needed following the instructions in the full manual.

Figur 7: View of the mower's underside, showing the rotating disc with three cutting blades. The arrows indicate the direction of rotation for effective mowing.

2. Rensning

Keep the mower's chassis, wheels, and sensors clean. Use a soft brush or cloth to remove grass clippings and dirt. Do not use high-pressure washers or immerse the device in water.

3. Batteripleje

The 2.0 Ah Power X-Change battery is designed for durability. Store the battery in a cool, dry place when not in use, and avoid extreme temperatures. For long-term storage, ensure the battery is partially charged (around 50%).

Fejlfinding

This section addresses common issues you might encounter with your robotic lawn mower. For more detailed troubleshooting, refer to the complete product manual.

Tekniske specifikationer

Garanti og support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Einhell webGarantibetingelserne kan variere afhængigt af region og forhandler.

If you require technical support, have questions about operation, or need to order spare parts, please contact Einhell customer service or the retailer from whom you purchased the product. Keep your model number (3413992) and purchase receipt ready when contacting support.

For generelle forespørgsler kan du besøge Einhell-embedsmand webwebsted.