Okin Motor Model JLDQ.19B.495.344Z01 Instruction Manual

1. Produktet er slutview

The Okin Refined-R Model JLDQ.19B.495.344Z01 is an original Okin JLDQ series motor designed for power recliner and bed actuator replacement. This motor is suitable for replacing existing JLDQ.19B.495.344Z01 units and is also compatible with the JLDQ.19B.495.344Z series, with minor differences that do not affect its functionality.

It is crucial to verify your current motor's brand and model number before purchasing for at sikre kompatibilitet.

Figure 1: Okin Motor Model JLDQ.19B.495.344Z01 with attached cables.

2. Produktfunktioner og komponenter

This actuator motor set consists of one motor unit and three distinct connectors, each serving a specific purpose:

• 5-pin round plug: Designed for connection to the switch hand control.
• 2-pin square plug with clip: Used for connecting to the power supply.
• 2-benet stikkontakt: Intended for connection to a slaved motor, if applicable.

Figur 2: Detaljeret view of the motor's connectors, showing the 2-pin plug for power supply, 5-pin plug for recliner switch, and 2-pin socket for a slaved motor.

Figure 3: Diagram illustrating key product features including dimensions and load capacity.

3. Installationsvejledning

The Okin motor is designed for straightforward installation. Follow these general steps for replacement:

1. Forberedelse: Ensure the power recliner or bed is disconnected from the main power supply. Turn the chair on its side to access the motor area.
2. Afmontering af gammel motor: Carefully disconnect all cables from the existing motor. Note the position and connection type of each cable. Unbolt or unclip the old motor from the frame.
3. Montering af ny motor: Position the new Okin motor in the same location as the old one. Secure it to the frame using the appropriate bolts or clips.
4. Kabelforbindelse: Connect the 5-pin round plug to the hand control, the 2-pin square plug to the power supply, and the 2-pin socket to any slaved motor if present. Ensure all connections are secure.
5. Test: Once installed, carefully return the furniture to its upright position. Reconnect the power supply and test the motor's functionality using the hand control.

Vigtig bemærkning:

Different actuator/motors may not be compatible with all frames. The frame has strict demands for the actuator/motor's minimum install dimension, stroke, and plugs. Always verify your motor brand and model first. The package includes one Okin refined motor, ready for installation.

4. Betjeningsvejledning

Once the Okin motor is correctly installed and connected to the power supply and hand control, operation is simple:

• Tænd: Ensure the recliner or bed is plugged into a functional power outlet.
• Brug af håndbetjeningen: Utilize the buttons on your recliner's hand control to extend or retract the motor. Typically, there are buttons for extending the footrest and reclining the backrest, or for lifting/lowering the bed.
• Glat betjening: The motor is designed for smooth and quiet operation. Avoid forcing the mechanism if it encounters resistance.

Driftsfrekvens:

The motor is designed for intermittent use. Its operation frequency is specified as On 1 minute / Off 8 minutes. Adhering to this cycle helps prevent overheating and prolongs the motor's lifespan.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your Okin motor, consider the following maintenance tips:

• Regelmæssig rengøring: Keep the motor and surrounding areas free from dust and debris. Use a dry cloth to wipe down the exterior.
• Kabelinspektion: Periodically check all cables and connections for any signs of wear, fraying, or loose connections. Ensure plugs are securely seated.
• Smøring: The motor is generally maintenance-free regarding internal lubrication. However, if any moving parts of the recliner mechanism (not the motor itself) become stiff, consult your furniture's manual for appropriate lubrication points.
• Undgå overbelastning: Do not exceed the specified load capacity of the motor (Push force: 1000N, Pull force: 1000N).

6. Fejlfinding

If you encounter issues with your Okin motor, follow these troubleshooting steps:

1. Ingen bevægelse:
   • Check if the power cord is securely plugged into both the wall outlet and the power supply unit.
   • Verify that the power supply unit is functioning correctly (some have indicator lights).
   • Inspect the hand control cable for damage and ensure it is firmly connected to the motor.
2. Intermitterende drift:
   • Ensure the motor is not overheating. Allow it to cool down for at least 8 minutes if it has been operating continuously.
   • Check for any obstructions in the recliner mechanism that might be preventing smooth movement.
3. Usædvanlige lyde:
   • Listen carefully to pinpoint the source of the noise. It might be coming from the furniture mechanism rather than the motor itself.
   • Sørg for, at alle monteringsbolte er stramme og sikre.

General Troubleshooting Advice:

Always troubleshoot the switch and power supply first before assuming an issue with the motor itself. Confirm that the motor and its plug types match your recliner system.

7. Specifikationer

Figure 4: Close-up of the motor's label, showing model number, technical data, and certifications.

8. Garanti og support

For specific warranty information regarding your Okin motor, please refer to the documentation provided with your purchase or contact the manufacturer directly. As a replacement part, warranty terms may vary.

For technical support or further inquiries, please contact OKIN Refined Electric Technology Co.,Ltd. or your product supplier. Always provide your motor's model number (JLDQ.19B.495.344Z01) and any serial numbers for efficient assistance.