Kiwi S2205908 Akku-boremaskine og tilbehørssæt Brugermanual

1. Introduktion

Thank you for choosing the Kiwi S2205908 Cordless Drill and Accessory Set. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

The Kiwi S2205908 (also known as Khsd 7517) is a versatile 12V cordless drill designed for various drilling and screwdriving tasks around the home and workshop. It features a maximum rotational speed of 750 RPM and comes with a 1.3 Ah Lithium-Ion battery.

2. Sikkerhedsinstruktioner

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektrisk værktøj, for at reducere risikoen for brand, elektrisk stød og personskade.

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Brug altid øjenbeskyttelse. Brug høreværn, når du bruger boremaskinen i længere tid. Klæd dig korrekt på; undgå løstsiddende tøj eller smykker. Fastgør langt hår.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Tag stikket ud af strømkilden og/eller fjern batteriet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Brug og pleje af batteripakken: Genoplad kun med den oplader, der er angivet af producenten. Brug ikke batteripakker med andre elværktøjer.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er til stede i din pakke:

• Kiwi S2205908 Cordless Drill
• 12V 1.3 Ah Lithium-Ion Battery Pack
• Battery Charger (AC powered)
• Assorterede borekroner
• Assorted Screwdriver Bits
• Bit Holder
• Opbevaringskasse
• Brugervejledning (dette dokument)

Image 1: Kiwi S2205908 Cordless Drill and Accessory Set. This image displays the yellow and black cordless drill, a 12V 1.3Ah Lithium-Ion battery, a selection of drill bits, a bit holder, and the clear plastic storage case.

4. Produktfunktioner og komponenter

Familiarize yourself with the main parts of your cordless drill:

1. Nøglefri Chuck: Til hurtige og nemme borskift.
2. Momentjusteringsring: To select the desired torque setting for screwdriving or drilling.
3. Frem/tilbage-vælger: To change the rotation direction.
4. Udløserkontakt: Aktiverer boremaskinen og styrer hastigheden baseret på tryk.
5. Batteri pakke: Removable 12V 1.3 Ah Lithium-Ion battery.
6. Ventilationsåbninger: Til motorkøling.

Image 2: Kiwi S2205908 Cordless Drill. This image provides a detailed view of the yellow and black drill, highlighting its ergonomic handle, keyless chuck, and the 12V 1.3Ah Lithium-Ion battery pack.

5. Opsætning

5.1 Opladning af batteriet

The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use.

1. Connect the AC charger to a standard wall outlet.
2. Skub batteripakken ind i opladeren, indtil den klikker på plads.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger instructions for specific light indications).
4. Once charged, disconnect the charger from the outlet and remove the battery pack.

Note: The battery pack may become warm during charging. This is normal. Do not charge in extreme temperatures.

5.2 Installation og fjernelse af batteripakken

• Sådan installeres: Juster batteripakken med bunden af ​​borehåndtaget, og skub den ind, indtil den klikker sikkert på plads.
• For at fjerne: Press the battery release button (if present, typically on the sides of the battery) and slide the battery pack out of the handle.

5.3 Installing and Removing Drill/Screwdriver Bits

1. Ensure the drill is switched off and the forward/reverse selector is in the neutral (locked) position.
2. Rotate the keyless chuck counter-clockwise to open the chuck jaws.
3. Sæt det ønskede bor eller skruetrækkerhoved i patronen, og sørg for, at det er centreret.
4. Rotate the keyless chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten only.
5. For at fjerne: Drej spændepatronen mod uret for at løsne kæberne og trække boret ud.

6. Betjeningsvejledning

6.1 Fremad-/bagudrotation

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening screws) and to the right for reverse rotation (removing screws). Position it in the center to lock the trigger and prevent accidental starting.

6.2 Hastighedskontrol

The drill features variable speed control. The speed of rotation is controlled by the amount of pressure applied to the trigger switch. Pressing the trigger lightly results in lower speed, while pressing it fully results in maximum speed (up to 750 RPM).

6.3 Justering af moment

The torque adjustment ring allows you to select the appropriate torque setting for screwdriving applications. Lower settings are for smaller screws or softer materials, while higher settings are for larger screws or harder materials. The drill setting (often indicated by a drill bit icon) provides maximum torque for drilling.

6.4 Boring

1. Vælg det passende bor til materialet og hulstørrelsen.
2. Set the torque adjustment ring to the drill icon for maximum power.
3. Mark the drilling spot.
4. Hold om muligt boremaskinen fast med begge hænder.
5. Start drilling at a low speed to prevent the bit from wandering, then increase speed as the bit engages the material.
6. Tryk konstant og jævnt. Brug ikke for meget kraft på boremaskinen.

6.5 Skruning

1. Vælg den korrekte skruetrækkerbit til skruehovedet.
2. Set the torque adjustment ring to a suitable setting for the screw size and material. Start with a lower setting and increase if needed.
3. Place the screwdriver bit into the screw head.
4. Apply firm, steady pressure to prevent cam-out (the bit slipping from the screw head).
5. Start at a low speed and increase as the screw drives in.

7. Vedligeholdelse

• Rensning: Hold værktøjets ventilationsåbninger rene for at forhindre overophedning. Brug en blød, tøramp klud til at rengøre ydersiden. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Batteripleje: Store battery packs in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Recharge them periodically if not in use.
• Opbevaring: When not in use, store the drill and accessories in their original case in a dry, secure location out of reach of children.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

Kiwi products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or contact Kiwi customer service through their official webwebsted eller kontaktkanaler.

Gem venligst din købsbevis i tilfælde af garantikrav.