1. Introduktion
Welcome to the world of the LEXiBOOK Power Puppy, your new interactive robot companion. This manual provides essential information for the safe and effective use of your Power Puppy, including setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before first use and retain it for future reference.
2. Sikkerhedsoplysninger
- Anbefalet alder: Velegnet til børn fra 3 år og opefter.
- Batterisikkerhed: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Remove batteries if the product is not used for an extended period.
- Kvælningsfare: Small parts may be present. Not suitable for children under 3 years without adult supervision.
- Overvågning: Voksenopsyn anbefales under leg.
- Opladning: Only use the provided USB charging cable for the robot's rechargeable battery. Do not attempt to charge non-rechargeable batteries.
3. Pakkens indhold
Sørg for at alle varer er til stede i pakken:
- 1 x LEXiBOOK Power Puppy Smart Robot Dog
- 1 x fjernbetjening
- 1 x Rechargeable Battery (for robot)
- 1 x USB ladekabel

Billede 3.1: The LEXiBOOK Power Puppy robot dog, its remote control, a green rechargeable battery, and a USB charging cable.
4. Opsætning
4.1. Charging the Robot's Battery
- Locate the battery compartment on the Power Puppy.
- Indsæt det genopladelige batteri i rummet.
- Connect the USB charging cable to the robot and a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The robot's indicator light will show charging status (refer to product for specific light behavior).
- Allow approximately 2 hours for a full charge. Disconnect once fully charged.
4.2. Installation af fjernbetjeningsbatterier
Fjernbetjeningen kræver 2 x AA-batterier (medfølger ikke).
- Åbn batterirummet på bagsiden af fjernbetjeningen.
- Isæt 2 nye AA-batterier, og sørg for at polerne vender korrekt (+/-).
- Luk batterirummet forsvarligt.

Billede 4.1: The LEXiBOOK Power Puppy robot dog in black with blue accents, accompanied by its black remote control.
5. Betjeningsvejledning
5.1. Tænd/sluk
- To turn on the Power Puppy, locate the power switch (usually on the underside or back) and slide it to the 'ON' position.
- To turn off, slide the switch to the 'OFF' position.
5.2. Fjernbetjeningsfunktioner
The remote control allows for various commands and interactions. Refer to the diagram below for button layout and functions:

Billede 5.1: A close-up of the Power Puppy's remote control, highlighting various buttons for different commands and functions.
- Retningstaster: Styr bevægelse fremad, bagud, til venstre og til højre.
- Lyseffekter: Activates various light patterns on the robot's eyes and collar.
- Sit Down / Sit Up: Commands the robot to sit or stand.
- Songs / Music: Plays various musical tunes.
- Hej: Initiates a greeting action.
- Tal: The robot barks to count numbers.
- Bevægelseskontrol: Activates the gesture control mode.
- Program: Går i programmeringstilstand (se 5.4).
- Håndstand: Commands the robot to perform a handstand.
- Bind: Justerer lydstyrken.
- Angry / Enervated: Triggers an 'angry' or 'enervated' reaction.
- Stop: Halts all current actions.
- Go Down / Get Up: Commands the robot to lower or raise its body.
- Armstrækninger: Commands the robot to perform push-up movements.
- Yoga: Commands the robot to perform a yoga pose.
- Animal Sounds & Guard: Plays animal sounds or activates guard mode.
- Follow-Me: Activates the 'Follow-Me' function (see 5.3).
- Demo: Initiates a demonstration sequence of various tricks.
5.3. Gesture Control and Follow-Me Function
The Power Puppy responds to hand gestures and can follow you.
- Bevægelseskontrol: Press the 'Gesture Control' button on the remote. The robot will then respond to specific hand movements (e.g., moving forward when a hand is placed in front of it). Experiment with different gestures to discover its reactions.
- Følg mig funktion: Activate this function via the remote. The Power Puppy will attempt to follow your movements, staying close to you.
5.4. Programming Function
You can program a sequence of movements and actions for your Power Puppy.
- Tryk på knappen 'Program' på fjernbetjeningen for at gå i programmeringstilstand.
- Input your desired sequence of commands using the remote control buttons.
- Press the 'Program' button again to save and execute the sequence. The robot will then perform the programmed actions.
5.5. Interaktive funktioner
- Taktil respons: The Power Puppy reacts to caresses on its head, often initiating a dance or other affectionate response.
- Lyd og lyseffekter: The robot features LED lights in its eyes and on its collar, which illuminate during various actions and expressions. It also produces a variety of sounds, including barking, music, and animal imitations.
- Tricks and Movements: The Power Puppy can perform numerous tricks such as sitting, lying down, begging, doing push-ups, handstands, and yoga poses.

Billede 5.2: Four images showing the Power Puppy in different poses: lying down, standing on hind legs, sitting, and doing a handstand.

Billede 5.3: En side view of the LEXiBOOK Power Puppy, showcasing its black body with blue robotic details and wheels for feet.
Video 5.1: A video demonstrating the various features and interactive capabilities of the LEXiBOOK Power Puppy robot dog, including remote control, gesture control, programming, and different movements.
6. Vedligeholdelse
- Rensning: Tør robotten og fjernbetjeningen af med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Batteripleje: Remove batteries from the remote control if it will not be used for an extended period. Fully charge the robot's rechargeable battery before long-term storage.
- Opbevaring: Store the Power Puppy in a cool, dry place away from direct sunlight and extreme temperatures.
7. Fejlfinding
- Robotten svarer ikke:
- Ensure both the robot and remote control are powered on.
- Check if the robot's rechargeable battery is fully charged.
- Udskift batterierne i fjernbetjeningen, hvis de er lave eller afladede.
- Ensure there are no obstructions between the remote control and the robot.
- Robot Not Moving Correctly:
- Verify the robot is on a flat, smooth surface.
- Check for any debris or hair caught in the wheels or joints.
- Batteri holder ikke opladning:
- Ensure the USB charging cable is properly connected to both the robot and the power source.
- Prøv en anden USB-strømkilde.
- If the issue persists, the rechargeable battery may need replacement. Contact customer support.
8. Specifikationer
| Modelnummer | DOG01BK |
| Mærke | LEXiBOG |
| Produktdimensioner | 25.7 cm (længde) x 16 cm (bredde) x 28 cm (højde) |
| Varens vægt | 1.67 pund (ca. 0.76 kg) |
| Anbefalet alder | 3 år og opefter |
| Robot batteri | 1 x Rechargeable Battery (included) |
| Batterier til fjernbetjening | 2 x AA batterier (medfølger ikke) |
| Fabrikant | Lexibog |
| Udgivelsesdato | 26. august 2021 |

Billede 8.1: An image illustrating the approximate dimensions of the Power Puppy robot dog: 28cm height, 25.7cm length, and 16cm width.
9. Garanti
The LEXiBOOK Power Puppy comes with a 2 års garanti. This product was designed and developed in Europe and manufactured in China. Please retain your proof of purchase for warranty claims.
10. Support
For yderligere assistance, teknisk support eller garantiforespørgsler, besøg venligst den officielle LEXiBOOK. webwebstedet eller kontakt deres kundeserviceafdeling. Se produktemballagen for specifikke kontaktoplysninger.
- Online support: Visit the LEXiBOOK Store on Amazon
- Fabrikant: Lexibog





