Plustek OpticFilm 8200i Ai Film- og diasscanner brugermanual

1. Introduktion

The Plustek OpticFilm 8200i Ai is a high-resolution film and slide scanner designed for converting 35mm negatives and slides into digital images. It features a built-in infrared channel for dust and scratch removal, IT8 calibration for accurate color reproduction, and is bundled with SilverFast Ai Studio 8 software for advanced image processing.

Image 1.1: Plustek OpticFilm 8200i Ai scanner and included accessories.

2. Pakkens indhold

Verify that all items are present in the package before proceeding with setup:

• Plustek OpticFilm 8200i Ai Scanner
• SilverFast Ai Studio 8 Software (License Key/Download Information)
• IT8 Calibration Target (ISO 12641-1 compliant 1997)
• 35mm Negative Film Stripe Holders (8 pieces)
• USB kabel
• Strømadapter
• Hurtig startvejledning

Image 2.1: Included 35mm Negative Film Holders.

3. Opsætning

3.1. Systemkrav

Sørg for, at din computer opfylder minimumssystemkravene:

• Operating System: Windows 7/8/10/11 or Mac OS 10.7.x ~ 11.x (Big Sur)
• Tilgængelig USB -port
• Sufficient Hard Disk Space for Software and Scanned Images

3.2. Software installation

1. Download the latest drivers and SilverFast Ai Studio 8 software from the official Plustek webwebsted (www.plustek.com).
2. Run the installer for the drivers first, following the on-screen instructions.
3. Install SilverFast Ai Studio 8. You will need to register your software using the provided license key.

3.3. Hardwareforbindelse

1. Tilslut strømadapteren til scanneren og derefter til en stikkontakt.
2. Connect the USB cable to the scanner and then to an available USB port on your computer.
3. Power on the scanner using the power button. The indicator light should illuminate.

3.4. IT8 Calibration

For optimal color accuracy, perform IT8 calibration using the included IT8 target and SilverFast software. This process ensures consistent and accurate color reproduction.

Image 3.1: IT8 calibration process for accurate color results.

4. Betjeningsvejledning

4.1. Loading Film and Slides

1. Open the appropriate film holder (35mm negative or slide holder).
2. Carefully place your film strips or mounted slides into the designated slots, ensuring they are flat and correctly oriented.
3. Close the film holder securely.
4. Sæt den isatte filmholder i scannerens filmåbning.

4.2. Scanning Process with SilverFast Ai Studio 8

Launch SilverFast Ai Studio 8 software on your computer.

Image 4.1: Scanner front panel featuring IntelliScan and QuickScan buttons.

1. Preview Scan: Initiate a preview scan within SilverFast to see a low-resolution version of your film/slide. This allows for cropping and initial adjustments.
2. Juster indstillinger: Utilize SilverFast's tools for color correction, exposure adjustment, and other enhancements.
3. iSRD (Infrared Dust & Scratch Removal): Activate the iSRD feature. The scanner's built-in infrared channel detects and removes dust and scratches from the film surface, significantly reducing the need for manual retouching.


Image 4.2: Illustration of iSRD technology for defect removal.

4. HDRi (High Dynamic Range Imaging): Enable HDRi to capture 64-bit RAW data, including information from the infrared channel. This provides maximum detail and dynamic range for post-processing.


Image 4.3: SilverFast interface demonstrating HDRi 64-bit RAW data capture.

5. 16-bit Histogram: Use the 16-bit histogram tool for precise adjustment of black point, white point, and midtones, ensuring optimal tonal range in your scans.


Billede 4.4: Eks.amples of 16-bit histogram adjustments in SilverFast.

6. Final Scan: Once settings are optimized, initiate the final high-resolution scan. Save your digital images in your preferred format.

4.3. Using IntelliScan and QuickScan Buttons

The scanner features two front panel buttons for quick operations:

• IntelliScan: Configurable through SilverFast, this button can be assigned to perform a specific scanning task or open the SilverFast software.
• QuickScan: Also configurable, this button can be set to perform a quick scan with predefined settings or launch a specific application.

5. Vedligeholdelse

5.1. Rengøring af scanneren

• Sørg for, at scanneren er slukket og taget ud af stikket, inden rengøring.
• Brug let en blød, fnugfri klud damprengøres med vand eller et mildt, ikke-slibende rengøringsmiddel til at tørre ydersiden af.
• For the film path and glass surfaces, use a specialized lens cleaning cloth and solution to avoid scratches and residue. Do not spray cleaner directly onto the scanner.
• Use a can of compressed air to remove dust from the film slot and internal areas.

5.2. Film Holder Care

Keep film holders clean and free of dust or debris, as these can transfer to your film and affect scan quality. Store them in a clean, dry place when not in use.

6. Fejlfinding

7. Specifikationer

• Scannertype: Film (35mm negatives and slides)
• Modelnavn: 8200i Ai
• Optisk opløsning: 7200 dpi
• Forbindelse teknologi: USB (infrared channel for iSRD)
• Farvedybde: 24 bpp (up to 64-bit HDRi RAW data)
• Optisk sensorteknologi: CMOS
• Medfølgende software: SilverFast Ai Studio 8
• Kalibrering: IT8 Calibration Target included
• Understøttede operativsystemer: Windows 7/8/10/11, Mac OS 10.7.x ~ 11.x

8. Garanti og support

For warranty information, technical support, and driver downloads, please visit the official Plustek website or contact Plustek customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Plustek Webwebsted: www.plustek.com