Yaheetech Black Computer Desk YA-00108010 Instruction Manual

Indledning

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Yaheetech Black Computer Desk (Model YA-00108010). Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality.

Figure 1: Yaheetech Black Computer Desk in a home office environment.

Sikkerhedsoplysninger

To ensure your safety and prevent damage to the product, please observe the following:

• Do not sit on the desk. The desk is designed to support computer equipment and office supplies, not human weight.
• Sørg for, at alle skruer og fastgørelseselementer er forsvarligt fastspændt under montering.
• Placer skrivebordet på en flad, stabil overflade for at forhindre det i at vælte.
• Hold små dele væk fra børn under montering.

Pakkens indhold

Før montering påbegyndes, skal du kontrollere, at alle nedenstående komponenter er til stede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• All wooden panels (numbered 1-17)
• Hardware (screws, cam locks, dowels, drawer slides, handle)
• Assembly tools (screwdriver, Allen key - usually included or required)

Note: A detailed parts list with corresponding labels is typically included in the physical packaging.

Monteringsvejledning

Follow these steps carefully to assemble your Yaheetech Computer Desk. It is recommended to have a second person assist with certain steps.

1. Forbered skuffeskinner: Separate the inner (G-2) and outer (G-1) parts of the drawer slides. Attach the G-2 slides to the designated drawer side panel (Part 10) using screws.
2. Fastgør skuffeskinner til sidepaneler: Secure the G-1 slides to the main desk side panels (Parts 7, 8, 9) where the drawer will be located.
3. Saml skuffekassen: Connect the drawer side panels (Parts 15, 16, 17) and the drawer bottom (Part 1) using the provided fasteners.
4. Install Drawer Handle: Attach the drawer handle (Part D) to the front of the assembled drawer box.
5. Saml hovedbordrammen: Connect the main desk side panels (Parts 7, 8, 9) with the bottom panel (Part 13) and back panel (Part 14). Then, attach the top panel (Part 6).
6. Fastgør Hutch: Secure the hutch components (Parts 2, 3, 4, 5) to the top panel of the desk.
7. Installer skuffe: Carefully align the assembled drawer with the slides on the desk frame and push it in until it clicks into place.
8. Installer tastaturbakke: Attach the keyboard tray to its designated sliding mechanism under the main desk surface.

Betjeningsvejledning

Sliding Keyboard Tray

The keyboard tray is designed for convenient storage and access to your keyboard and mouse. Gently pull the tray outwards to extend it for use, and push it inwards to retract it when not needed. The smooth-gliding mechanism ensures effortless movement.

Opbevaringsskuffe

The integrated drawer provides a secure space for small office supplies, documents, or personal items. Pull the handle to open the drawer and push it back to close. The full-extension slides allow for easy access to the entire drawer contents.

Justerbare hylder

The open storage compartment features an adjustable shelf. To change the shelf height, remove the shelf, reposition the shelf pins to your desired height, and then place the shelf back onto the pins. This allows for flexible storage of items of various sizes, such as books, CPU, or decorative items.

Figure 2: Key features of the desk, including the hutch, drawer, keyboard tray, and open storage.

Figure 3: The adjustable shelf in the storage compartment.

Opretholdelse

To maintain the appearance and longevity of your desk:

• Clean the desk surface with a soft, damp klud. Undgå slibende rengøringsmidler eller stærke kemikalier.
• Wipe up spills immediately to prevent water damage.
• Regularly check all fasteners and tighten them if necessary to ensure stability.

Figure 4: The desk surface is designed to be water-resistant.

Fejlfinding

• Ustabilitet: Check that all screws and fasteners are securely tightened. Ensure the desk is placed on a level surface.
• Drawer/Keyboard Tray not sliding smoothly: Check the alignment of the slides and ensure no obstructions are present. Lubricate slides if necessary with a suitable product.
• Manglende dele: Refer to the package contents list and contact customer support if any parts were missing upon delivery.

Specifikationer

Figur 5: Detaljerede dimensioner af skrivebordet.

Garanti og support

This product is eligible for returns within 30 days of receipt. For specific warranty details or customer support, please refer to your purchase documentation or contact Yaheetech customer service. Please note that spare parts availability may vary.