Indledning
This manual provides essential instructions for the proper setup, operation, and maintenance of your Technics SL-1200MK7 Direct Drive Turntable. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.
Image: A black Technics SL-1200MK7 direct drive turntable, featuring a slipmat with the Technics logo, a tonearm, and pitch control faders. This image illustrates the overall design of the turntable.
Sikkerhedsinstruktioner
To prevent electric shock, fire, damage, or injury, please observe the following safety precautions:
- Udsæt ikke denne enhed for regn eller fugt.
- Fjern ikke dækslet. Service udføres kun af kvalificeret personale.
- Ensure the unit is placed on a stable, level surface to prevent vibrations and ensure proper operation.
- Connect the unit to a grounded power outlet. Proper grounding is essential to prevent humming and ensure sound quality.
- Undgå at placere enheden i nærheden af varmekilder eller i direkte sollys.
- Opbevares utilgængeligt for børn.
Hvad er der i æsken
Verify that all the following components are included with your Technics SL-1200MK7 turntable:
- Pladespiller enhed
- slipmat
- Slipsheet
- Støvdæksel
- EP plade adapter
- Balancevægt
- Hovedskal
- Screw set for cartridge
- PHONO kabel
- PHONO jordledning
- AC-strømforsyningsledning
- Brugervejledning (dette dokument)
Opsætning
Follow these steps to properly set up your turntable:
- Udpakning og placering: Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from speakers to minimize vibration feedback.
- Stylus/Cartridge Installation: Attach your chosen cartridge to the head shell using the provided screw set. Note: A stylus is not included with the turntable and must be purchased separately.
- Tonearm Balance and Tracking Force:
- Attach the head shell with the cartridge to the tonearm.
- Mount the balance weight onto the rear of the tonearm.
- Adjust the balance weight until the tonearm is perfectly level (floating freely).
- Set the tracking force ring to "0" while the tonearm is balanced.
- Rotate the balance weight to apply the recommended tracking force for your cartridge (typically 0-4g, as per the turntable's adjustment range).
- Anti-skøjteløbsjustering: Set the anti-skating dial to match the tracking force you applied. This helps prevent the stylus from skipping inwards.
- Arm-Height Adjustment: The tonearm height can be adjusted from 0 to 6 mm to ensure the tonearm is parallel to the record surface when playing. Use the tonearm height adjustment ring at the base of the tonearm.
- Tilslutning af kabler:
- Connect the PHONO cable from the turntable's output to the PHONO input on your amplifier eller modtager.
- Connect the PHONO earth lead (ground wire) from the turntable to the ground terminal on your amplivligere. Proper grounding is crucial to eliminate hum.
- Connect the AC power supply cord to the turntable and then to a wall outlet.
- Støvdæksel: Place the dust cover on the turntable to protect it when not in use.
Betjeningsvejledning
Once set up, operating your SL-1200MK7 is straightforward:
- Tænd: Tænd for pladespilleren ved hjælp af strømafbryderen.
- Vælg hastighed: Choose the appropriate speed (33-1/3, 45, or 78 rpm) using the speed selector buttons. For 78 rpm, ensure the switch is engaged.
- Stedrekord: Carefully place a record on the platter. If playing an EP record, use the provided adaptor.
- Start afspilning:
- Løft tonearmen ved hjælp af cue-håndtaget.
- Tryk på START/STOP button to begin platter rotation. The platter will reach the selected speed quickly due to the direct drive system (approx. 0.7 seconds to 33 1/3 rpm).
- Carefully position the stylus over the desired groove on the record.
- Lower the tonearm gently using the cueing lever.
- Juster tonehøjde: Use the pitch control fader to fine-tune the playback speed if desired.
- Stop afspilning: At the end of the record, or when you wish to stop, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button to halt platter rotation.
Opretholdelse
Regular maintenance ensures the longevity and optimal performance of your turntable:
- Rengøring af støvdækslet: Brug en blød, tør klud til at tørre støvdækslet af. Brug en let tør klud til at fjerne genstridige mærker.amp klud og tør straks. Undgå slibende rengøringsmidler.
- Cleaning the Platter and Chassis: Wipe the metal platter and turntable chassis with a soft, dry cloth. Do not use solvents or harsh chemicals.
- Styluspleje: Regularly clean your stylus with a dedicated stylus brush or cleaner to remove dust and debris, which can affect sound quality and record wear.
- Optagelsespleje: Keep your records clean and stored properly to prevent dust accumulation and scratches.
- Undgå væsker: Do not spill liquids on the turntable. If liquid enters the unit, disconnect power immediately and consult a qualified technician.
Fejlfinding
Hvis du støder på problemer med din pladespiller, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No sound or humming noise | Improper grounding; PHONO cable not connected; Stylus not installed correctly. | Ensure the PHONO earth lead is securely connected to your amplifier's ground terminal. Verify PHONO cable connections. Check stylus installation and cartridge wiring. |
| Start/Stop button feels stiff or sticks | Button pressed incorrectly (e.g., from the edge); Internal mechanism issue. | Press the START/STOP button firmly and directly in the center. If the issue persists, contact customer support. |
| Sound is distorted or skipping | Incorrect tracking force or anti-skating; Dirty stylus; Damaged record. | Re-adjust tracking force and anti-skating. Clean the stylus. Inspect the record for damage. |
| One channel is quieter than the other | Loose cartridge wiring; Damaged stylus; Imbalance in amplifier indstillinger. | Check the wiring between the cartridge and head shell. Inspect the stylus for damage. Verify ampIndstillinger for sikringsbalance. |
| Feedback or vibration noise | Turntable placed on an unstable surface; Too close to speakers. | Ensure the turntable is on a solid, level, and isolated surface. Move the turntable further away from speakers. |
Specifikationer
Key technical specifications for the Technics SL-1200MK7 Direct Drive Turntable:
- Type: Direct Drive Manual Turntable
- Pladespiller hastigheder: 33-1/3, 45 rpm (with switch 78 rpm)
- Startmoment: 0.18 N·m / 1.8 kg·cm
- Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
- Wow og fladder: 0.025 % WRMS
- Fadets diameter: 332 mm (13-5/64 tommer)
- Tonearm Effective Length: 230 mm (9-1/16")
- Tonearm Overhang: 15 mm (19/32")
- Tonearm Offset Angle: 22°
- Sporingsfejlvinkel: Within 2° 32’ (at the outer groove of 30 cm (12") record) / Within 0° 32' (at the inner groove of 30 cm (12") record)
- Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
- Arm-height Adjustment Range: 0 - 6 mm
- Head Shell Weight: Ca. 7.6 g
- Strømforsyning: AC 110-240 V, 60 Hz
- Strømforbrug: 8 W
- Dimensioner (B x H x D): 453 x 169 x 353 mm (17.8 x 6.7 x 13.9 tommer)
- Vægt: Ca. 9.6 kg / 21.2 lbs
- Materiale: Metal (Chassis)
- Farve: Sort
Garanti og support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Technics webwebsted.
Online ressourcer:
