ATEM POWER 200W monokrystallinsk solpanel brugermanual

1. Introduktion

This user manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your ATEM POWER 200W Monocrystalline Solar Panel. This portable solar suitcase is designed for outdoor use, providing reliable power for 12V batteries in RVs, camping setups, and other off-grid applications. It features a 20A MPPT controller and a USB output for charging various devices.

Figure 1.1: The ATEM POWER 200W Monocrystalline Solar Panel and its included accessories.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing or operating the solar panel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Må ikke skilles ad: Do not attempt to disassemble, repair, or modify the solar panel or controller. Refer all servicing to qualified personnel.
• Korrekt ventilation: Ensure adequate ventilation around the MPPT controller during operation to prevent overheating.
• Vandeksponering: While the panel is designed for outdoor use, avoid submerging the controller in water. Protect connections from moisture.
• Elektriske forbindelser: Ensure all electrical connections are secure and correctly polarized before connecting to a battery or device. Incorrect wiring can cause damage.
• Batterikompatibilitet: Only connect to compatible battery types as specified in the specifications section (AGM, lead acid, Gel, Calcium & LiFePO4 batteries).
• Børn og kæledyr: Keep the solar panel and its components out of reach of children and pets.
• Håndtering: Handle the solar panel with care. Avoid dropping or subjecting it to strong impacts.
• Temperatur: Do not operate the solar panel outside its specified temperature range (refer to specifications).

3. Pakkens indhold

Verify that all items listed below are present and undamaged upon opening the package. If any items are missing or damaged, contact customer support.

• 1 x 200W Foldable Monocrystalline Solar Panel
• 1 x 20A MPPT Solar Controller
• 1 x 500CM Cable with 50A Anderson Plug
• 1 x 50CM Cable with Alligator Clamps & 50A Anderson Plug
• 1 x bæretaske
• 1 x Brugermanual (dette dokument)

Figure 3.1: Contents of the ATEM POWER 200W Solar Panel package.

4. Nøglefunktioner

The ATEM POWER 200W Monocrystalline Solar Panel is engineered with advanced features for optimal performance and durability:

• Monocrystalline Solar Cells: Utilizes A-grade monocrystalline solar cells with an energy conversion efficiency of up to 21%. Premium PET films ensure a light penetration rate of 95%.


Figure 4.1: High-efficiency monocrystalline solar cells.

• MPPT-controller: Equipped with a 20A MPPT (Maximum Power Point Tracking) controller, which harvests up to 20% more energy compared to traditional PWM controllers. It also features an auto-optimization function for immediate reconnection after any interruption.
• Let og bærbart design: Manufactured without glass, this solar panel weighs approximately 15.32 pounds (6.95kg). Its foldable design and robust carrying handle enhance portability, making it easy to transport.

Figure 4.2: The solar panel's portable and foldable design.
• Integrated Kickstands: Built-in kickstands allow for easy adjustment of the panel's angle to optimize solar energy harvesting throughout the day.


Figure 4.3: Integrated kickstands for optimal sun exposure.

• Holdbar konstruktion: Features anodized aluminum frames, reinforced corner protectors, and PET construction for enhanced durability, heat transfer, and resistance to dirt, corrosion, heat, and UV.


Figure 4.4: PET construction layers for durability.

• Diode Bypass Technology: Protects shaded cells from overheating and minimizes power loss caused by partial shading.
• Multiple Functionality: Compatible with various 12V battery types including AGM, lead acid, Gel, Calcium, and LiFePO4. Includes a 5V 1.5A USB port for direct charging of portable devices like smartphones and digital cameras.

5. Opsætningsvejledning

Follow these steps to set up your ATEM POWER 200W Monocrystalline Solar Panel:

1. Pakker ud: Fjern forsigtigt alle komponenter fra emballagen, og kontroller dem i forhold til listen "Pakkens indhold".
2. Vælg placering: Select a location that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or other obstructions.
3. Unfold Panel: Unfold the solar panel completely. The integrated kickstands will allow you to prop up the panel.
4. Juster vinkel: Adjust the kickstands to angle the panel directly towards the sun. For optimal performance, the panel should be perpendicular to the sun's rays.
5. Connect MPPT Controller: The 20A MPPT controller is integrated. Ensure its connections are secure.
6. Tilslut til batteri:
   • Using the 50CM cable with alligator clamps and 50A Anderson plug: Connect the alligator clamps to your 12V battery terminals (red to positive, black to negative). Then connect the Anderson plug to the corresponding port on the solar panel's integrated controller.
   • Using the 500CM cable with 50A Anderson plug: If your battery system has an Anderson plug input, connect this cable directly from the solar panel to your battery system.

   Vigtig: Always connect the solar panel to the battery før exposing the panel to sunlight to prevent damage to the controller. Disconnect the panel from the battery før folding or moving it.
7. Tilslut USB-enheder (valgfrit): If charging portable devices, connect them to the 5V 1.5A USB port on the MPPT controller.

6. Betjeningsvejledning

Once set up, the ATEM POWER 200W Monocrystalline Solar Panel operates largely automatically. The MPPT controller will manage the charging process to your 12V battery.

• Overvågning: The MPPT controller typically has indicators (LEDs or a small display) to show charging status and battery voltage. Refer to the controller's specific manual for detailed monitoring information.
• Optimal ydeevne: For best results, periodically check the panel's orientation and adjust its angle to face the sun directly as the sun moves across the sky.
• Skygge: Even partial shading of the panel can significantly reduce its output. Position the panel to avoid any shadows. The diode bypass technology helps mitigate power loss from shading, but full sun exposure is always ideal.
• USB-opladning: The USB port provides a stable 5V 1.5A output for charging small electronic devices. Ensure your device is compatible with these charging specifications.
• Opbevaring: When not in use, disconnect the panel from the battery, fold it, and store it in its carry bag in a cool, dry place away from direct sunlight.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer dit solpanels levetid og optimale ydeevne.

• Rensning:
  • Periodically clean the surface of the solar panel to remove dust, dirt, leaves, or other debris that may accumulate and reduce efficiency.
  • Use a soft cloth and mild, non-abrasive cleaning solution with water. Do not use harsh chemicals or abrasive materials that could scratch the panel surface.
  • Ensure the panel is dry before folding or storing.
• Undersøg forbindelser: Regularly check all electrical connections (Anderson plugs, alligator clamps) for corrosion, looseness, or damage. Ensure they are clean and secure.
• Fysisk inspektion: Inspect the panel for any physical damage, such as cracks, dents, or frayed cables. If damage is found, discontinue use and contact customer support.
• Opbevaring: Store the folded solar panel in its protective carry bag in a dry, cool environment when not in use for extended periods.

8. Fejlfinding

This section addresses common issues you might encounter with your solar panel. For problems not listed here, contact customer support.

9. Specifikationer

Technical specifications for the ATEM POWER 200W Monocrystalline Solar Panel:

Figur 9.1: Produktdimensioner.

10. Garanti og support

Garanti: The ATEM POWER 200W Monocrystalline Solar Panel comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or natural disasters.

Kundesupport: For technical assistance, warranty claims, or any questions regarding your product, please contact ATEM POWER customer support. Refer to the contact information provided on the product packaging or the official ATEM POWER webwebsted.

For more information, visit the official ATEM POWER store: ATEM POWER Store on Amazon.