1. Introduktion
Tak for købetasing the Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack. This device is designed to provide convenient, automatic illumination in various indoor and outdoor settings. Featuring motion-sensing technology and a magnetic mount, these battery-operated night lights offer flexible placement and energy-efficient lighting.
Figure 1: Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack (Packaging View)
This image displays the retail packaging for the Bytech BYMCMS101X2 Motion Sensor Night Light, showing two circular white night lights. Key features such as 'Up to 10ft Motion Sensing Range', 'Motion Sensor', 'Ultra Bright Light', 'Battery Operated', and 'Magnetic Mount' are highlighted on the packaging.
2. Pakkens indhold
Tjek venligst pakken for følgende varer:
- 2 x Bytech Motion Sensor Night Lights
- 2 x Magnetic Mounting Plates (pre-attached or separate)
- Brugervejledning (dette dokument)
Bemærk: Batterier er ikke inkluderet og skal købes separat.
3. Specifikationer
| Feature | Beskrivelse |
|---|---|
| Mærke | Bytech |
| Model | BYMCMS101X2 |
| Farve | Hvid |
| Strømkilde | Battery Operated (Batteries not included) |
| Maximum Motion Sensing Range | Op til ca. 1.5 meter (5 fod) |
| Monteringstype | Wall Mount, Magnetic Mount |
| Produktdimensioner | 5 cm D x 5 cm B x 5 cm H (ca. 12.7 cm x 12.7 cm x 12.7 cm) |
| Varens vægt | 1 pound (approx. 0.45 kg) |
| UPC | 805112078202 |
4. Opsætning
4.1 Batteriinstallation
- Locate the battery compartment cover on the back of the night light.
- Open the cover by twisting or sliding it according to the markings.
- Insert the required batteries (e.g., AAA or AA, refer to the compartment markings for correct type and polarity). Ensure correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
4.2 Mounting the Night Light
The Bytech Motion Sensor Night Light offers versatile mounting options:
- Magnetisk montering: The night light features a built-in magnet. Simply attach it to any metallic surface. For non-metallic surfaces, use the included magnetic mounting plate. Peel off the adhesive backing from the plate and firmly press it onto a clean, dry surface. Then, attach the night light to the magnetic plate.
- Vægbeslag: If the magnetic plate is not suitable, the night light may have keyhole slots for screw mounting. (Screws and anchors typically not included).
Figur 2: Side View of Night Light (Illustrative)
Dette billede viser en sideprofile of the Bytech Motion Sensor Night Light, highlighting its compact design and the area where a magnetic mount or wall mount could be attached. The sensor lens is visible on the front face.
Anbefalet placering: For optimal performance, place the night light in areas where motion detection is desired, such as hallways, stairwells, closets, bathrooms, or entryways. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
5. Betjeningsvejledning
The Bytech Motion Sensor Night Light is designed for automatic operation:
- Automatisk aktivering: Once batteries are installed and the night light is placed, it will automatically detect motion within its sensing range (up to 5 feet) in low-light conditions.
- Lys på: When motion is detected in a dark environment, the night light will illuminate.
- Sluk lyset: The light will automatically turn off after a short period (typically 15-30 seconds) if no further motion is detected.
- Dagslyssensor: The integrated daylight sensor prevents the light from activating during daytime or in brightly lit areas, conserving battery life.
6. Vedligeholdelse
6.1 Rengøring
To clean the night light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
6.2 Udskiftning af batteri
When the light output diminishes or the night light stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in Section 4.1.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | 1. Batterierne er døde eller forkert installeret. 2. Det omgivende lys er for skarpt. 3. Ingen bevægelse registreret inden for rækkevidde. | 1. Udskift batterierne, og sørg for at polerne vender korrekt. 2. Test i et mørkere miljø. 3. Ensure motion occurs within 5 feet of the sensor. |
| Lyset er tændt konstant. | 1. Continuous motion within sensing range. 2. Sensor obstruction or malfunction. | 1. Relocate the night light to an area with less constant activity. 2. Clean the sensor lens. If problem persists, contact support. |
| Bevægelsessensorens rækkevidde er dårlig. | 1. Obstructions blocking the sensor. 2. Incorrect placement. | 1. Ensure a clear line of sight to the detection area. 2. Reposition the night light for optimal coverage. |
8. Sikkerhedsoplysninger
- Bland ikke gamle og nye batterier eller forskellige typer batterier.
- Fjern batterierne, hvis enheden ikke skal bruges i en længere periode.
- Bortskaf brugte batterier ansvarligt i henhold til lokale regler.
- This product is intended for indoor use or sheltered outdoor areas. Avoid direct exposure to water or extreme weather conditions.
- Do not attempt to disassemble or modify the night light. This will void the warranty and may cause damage or injury.
- Opbevares utilgængeligt for børn og kæledyr.
9. Garanti og support
Bytech products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Bytech website. Please have your model number (BYMCMS101X2) and proof of purchase ready when contacting support.
For further assistance, you may visit www.bytechintl.com (eksamplinket, verificér det faktiske webwebsted).
