Wireless Car Alarm System User Manual

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VJOYCAR Wireless Car Alarm System. This universal vehicle anti-theft security system features a 2-way LCD pager remote control, a siren horn, and integrated shock, vibration, window, door, and trunk open alarm capabilities. Designed for DIY installation, it offers advanced security without complex wiring.

Pakkens indhold

Bekræft at alle komponenter er til stede i din pakke:

Car Alarm Siren with Motion Sensor
Two-Way Remote Key (LCD Pager)
One-Way Remote Key
Car Adaptor Air Sensor
High Frequency Antenna
Power Cables (Red/Black) with Fuse

Components of the VJOYCAR Wireless Car Alarm System, including the siren, two remote keys, air sensor, and antenna.

Figure 1: Included components of the VJOYCAR Wireless Car Alarm System.

Opsætning og installation

The VJOYCAR Wireless Car Alarm System is designed for quick and easy DIY installation, typically taking about 5 minutes. No cutting of original car cables is required, preserving your vehicle's circuit integrity.

Siren Installation

Connect the red cable of the siren to the car battery's positive (+) terminal.
Connect the black cable of the siren to the car battery's negative (-) terminal.
Connect the high frequency antenna to the designated connector on the siren.
Securely fix the siren in a suitable location, such as near the wiper, ensuring it is stable and protected.

Diagram showing the easy DIY installation of the car alarm siren by connecting red and black cables to the car battery.

Figure 2: Simplified diagram of the siren's power connection to the car battery.

Air Pressure Sensor Setup

Locate the on/off button on the car adaptor air sensor and turn it on. The LED light will flash, indicating it is active.
Plug the car adaptor air sensor into your car's cigarette lighter port. The red light will flash, confirming it is working.
The air sensor can be removed and hidden anywhere in the car after it is fully charged (lasts for approximately 5 days on a full charge).

Image showing the car adaptor air sensor and its battery indicator, emphasizing its portability and charging via cigarette lighter.

Figure 3: The car adaptor air sensor, designed for easy plug-and-play operation.

Installationsvideoguide

Video 1: Official VJOYCAR installation guide demonstrating the connection of the siren and antenna to the car battery.

Betjeningsvejledning

Tilkobling og frakobling af systemet

Use the 2-way LCD pager remote control to arm or disarm the alarm system. When armed, the system monitors for unauthorized entry or significant vibrations.

Video 2: Demonstration of arming and disarming the alarm system using the remote control.

2-Way Pager and Long Distance Monitoring

The system features a 2-way LCD pager remote control that receives notifications from the alarm siren. The RF high-frequency antenna ensures a communication range of up to 1000 meters (in open air conditions).

Image illustrating the 1000-meter range of the 2-way pager alarm system, showing a car in a parking lot and the remote control.

Figure 4: The 2-way pager remote control provides real-time alerts over long distances.

Sensor Functionality

The system incorporates multiple sensors to detect various threats:

Lufttrykssensor: Detects illegal opening of car doors, windows, or the trunk. The siren will alarm, and a notification will be sent to the LCD remote control.
Vibration/Motion Sensor: Detects car vibration or motion. The siren will alarm, and a notification will be sent to the LCD remote control.

Two images: top shows a car door being opened with a red dot indicating air sensor detection; bottom shows a car being towed with a red dot indicating shock sensor detection.

Figure 5: Visual representation of air sensor detecting door/trunk opening and shock sensor detecting car movement.

Video 3: Demonstration of the alarm triggering when a car door is opened.

Video 4: Demonstration of the alarm triggering when the car trunk is opened.

Find Car Function

With just one click on your remote, you can activate a function to help you locate your car in a large parking area.

Image showing a car park with a red location pin indicating the 'Find Car' feature, alongside the two remote keys.

Figure 6: The 'Find Car' feature assists in locating your vehicle.

Adjusting Vibration Sensitivity

The system offers 8 levels of vibration sensitivity, from low to high. You can adjust this setting to suit your environment and prevent false alarms.

Image showing the siren and remote keys with text indicating '8 Level of vibration sensitivity' and '1-8' for adjustment.

Figure 7: Adjusting the vibration sensitivity of the alarm system.

Video 5: Guide on how to adjust the siren's sensitivity using the remote control.

Trigger-tilstande

The alarm system supports four different trigger modes:

Mode 1 (Sound Once): Allows vibration trigger (default setting).
Mode 2 (Sound Twice): Allows low voltage udløser.
Mode 3 (Sound Three Times): Allows both vibration trigger and low voltage udløser.
Mode 4 (Sound Four Times): Forbids both vibration and low voltage triggers (effectively mutes the siren).

Image showing the siren and remote keys with text describing the '4 Kinds of Trigger Mode' and their functions.

Figur 8: Overview of the four available trigger modes for the alarm system.

Opretholdelse

To ensure the longevity and optimal performance of your VJOYCAR Wireless Car Alarm System, follow these general maintenance guidelines:

Keep the siren and sensors clean and free from excessive dirt or debris.
Regularly check the connections to the car battery to ensure they are secure.
Monitor the battery life of the air pressure sensor and recharge as needed.
Avoid exposing the remote controls and siren to extreme temperatures or direct water immersion.
If the system is not functioning correctly, refer to the troubleshooting section before attempting any repairs.

Fejlfinding

If you encounter issues with your VJOYCAR Wireless Car Alarm System, please consult the following common troubleshooting steps:

Problem	Mulig årsag/løsning
Siren does not sound or stops working.	Tjek strømforsyningen: Ensure the siren is perfectly installed and both power cables (red and black) have a secure power supply from the car battery. Remote Control Setting: Verify that the 2-way remote control is not set to "auto disarm" mode. In this mode, if the remote is close to the car, the siren may not sound even if the car is shaken, as it disarms automatically. Lydløs tilstand: Check if the remote control is in "mute" mode (often activated by pressing a specific button, e.g., '#'). In mute mode, the siren will not sound, but the alarm will still notify the 2-way remote control. Aktiveringstilstand: Confirm that the vibration working mode is activated and on for both 1-way and 2-way remote controls. Kontakt support: If the issue persists, contact VJOYCAR customer support for further assistance or a potential replacement siren.
False alarms or excessive sensitivity.	Juster følsomhed: The system has 8 levels of vibration sensitivity. Adjust it to a lower level if you are experiencing too many false alarms. Refer to the "Adjusting Vibration Sensitivity" section. Trigger -tilstand: Consider changing the trigger mode to one that is less sensitive to minor disturbances, such as Mode 4 which forbids vibration triggers.
Fjernbetjeningen reagerer ikke.	Tjek batteri: Ensure the remote control's battery is not depleted. Replace if necessary. Rækkevidde: Verify you are within the 1000-meter operating range. Obstacles like buildings can reduce effective range.

For any complex issues or if troubleshooting steps do not resolve the problem, please do not hesitate to contact VJOYCAR customer support. They can provide the latest user manual or specific assistance.

Produktspecifikationer

Feature	Detalje
Mærke	VJOYCAR
Varens vægt	1.63 pund
Pakkedimensioner	7.83 x 6.3 x 3.39 tommer
Trådløs fjernbetjening	Ja
Kompatible enheder	Cars (12-15V power input)
Maksimal rækkevidde	1000 Meters (RF high frequency antenna)
Støjniveau	125 dB
Sensorer	Built-in shock/vibration sensor, built-in air pressure sensor
Installationstype	DIY (Do-It-Yourself)

Garanti og support

For warranty information, technical support, or to obtain the latest version of this user manual, please contact VJOYCAR customer service through their official channels. Your satisfaction is important, and they are available to assist with any questions or concerns regarding your product.

Du kan også henvende dig til den officielle Brugervejledning (PDF) for yderligere detaljer.

	VJOYCAR X6 trådløst bilalarmsystem: Installations- og brugervejledning Detaljeret installations- og brugervejledning til VJOYCAR X6 trådløst bilalarmsystem. Dækker pakkens indhold, trinvis installation af sirene, antenne og luftsensor samt omfattende instruktioner til betjening af envejs- og tovejsfjernbetjeninger, inklusive triggerindstillinger og justering af følsomhed.
	T10 brugervejledning: Funktioner, specifikationer og betjening Omfattende brugervejledning til T10 GPS-sporingsenheden. Lær om dens funktioner, hardwarespecifikationer, installation, SMS-kommandoer til sporing, fjernlytning, advarsler og strømstyring.
	V70 OBD Bilcomputermåler Brugermanual Brugermanual til V70 OBD-bilcomputerens måler, med detaljeret produktionsbeskrivelse, specifikationer, driftsindstillinger, softwareopdateringer, datastrømsparametre og serviceprocedurer.
	VJOYCAR GPS HUD Tekniske specifikationer og brugervejledning Detaljerede tekniske specifikationer, brugsanvisninger og garantioplysninger for VJOYCAR GPS Head-Up Display (HUD) til biler og lastbiler. Lær om dens funktioner, strømkrav, driftsforhold og garantipolitik.
	Brugervejledning til GPS-køretøjssporing - VJOYCAR Omfattende brugervejledning til VJOYCAR GPS-køretøjssporeren (version V2.1), der dækker installation, opsætning, betjening, alarmhåndtering og fejlfinding.
	VJOYCAR W02 5.5" Head-up-display (HUD) brugermanual - installation, indstillinger og betjening Omfattende brugermanual til VJOYCAR W02 5.5-tommer OBDII Head Up Display (HUD). Denne vejledning dækker installation, hovedfunktioner, detaljerede indstillinger, almindelige betjeningsprocedurer, fejlfinding af almindelige problemer og tekniske specifikationer for sikker og bekvem kørsel.

VJOYCAR 2-Way LCD Pager Remote Control DIY Install System