Behringer TD-3-MO-AM Analog Bas Line Synthesizer Brugermanual

Indledning

The Behringer TD-3-MO-AM is a "Modded Out" Analog Bass Line Synthesizer designed to deliver classic bass sounds with enhanced features. It incorporates a Voltage Controlled Oscillator (VCO), MIDI-Controllable Voltage Controlled Filter (VCF), and a Sub-Harmonics Oscillator, providing a versatile platform for electronic music production. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your TD-3-MO-AM synthesizer.

Produkt overview

The TD-3-MO-AM features a pure analog signal path, a 16-step sequencer, and a range of controls for sound shaping. Its compact design and robust construction make it suitable for both studio and live performance environments.

Behringer TD-3-MO-AM Analog Bass Line Synthesizer, front view

Figur 1: Forside view of the Behringer TD-3-MO-AM Analog Bass Line Synthesizer, showcasing its controls and distinctive yellow finish.

Nøglefunktioner:

"Modded Out" design with legendary modifications for enhanced sound capabilities.
Pure analog signal path based on classic VCO, VCF, and VCA designs.
Sawtooth and square waveform VCO with transistor wave-shaping circuitry.
Powerful 4-pole low-pass resonant filter with dedicated controls for cut-off, resonance, envelope, decay, and accent.
Easy-to-use 16-step sequencer with 7 tracks, each supporting up to 250 user patterns.
Integrated distortion circuit for adding grit and character to your bass lines.

Opsætning

Before operating your TD-3-MO-AM, ensure it is properly set up according to these instructions.

Udpakning og inspektion:

Carefully remove the synthesizer from its packaging.
Undersøg enheden for tegn på skader, der kan være opstået under transporten. Kontakt straks din forhandler, hvis der konstateres skader.
Gem de originale emballagematerialer til senere transport eller opbevaring.

Strømtilslutning:

Tilslut den medfølgende strømadapter til POWER DC INPUT on the rear panel of the TD-3-MO-AM. Plug the adapter into a suitable power outlet. Ensure the power switch is in the OFF position before connecting or disconnecting power.

Behringer TD-3-MO-AM Analog Bass Line Synthesizer, rear view med porte

Figur 2: Bagside view of the TD-3-MO-AM, showing the power input, MIDI ports, USB port, and audio output.

Lydforbindelser:

Tilslut PRODUKTION jack (1/4" TS) to your mixer, audio interface, or amplifier ved hjælp af et standard instrumentkabel.
For private monitoring, connect headphones to the TELEFON jack (1/4" TRS).

MIDI and USB Connections:

For MIDI control, connect a MIDI cable from your MIDI controller or interface to the MIDI IN havn.
To daisy-chain MIDI devices, use the MIDI OUT / THRU havn.
Tilslut USB port to your computer for MIDI over USB functionality and firmware updates.

CV/Gate Connections:

The TD-3-MO-AM offers extensive connectivity for integration with modular synthesizers and other CV/Gate compatible equipment:

FILTER IN: External audio input for processing through the internal filter.
SYNC IN: Input for external clock synchronization.
CV OUT: Outputs control voltage for pitch.
PORT UD: Outputs gate signals for note triggers.

Betjeningsvejledning

This section details the primary functions and controls of your TD-3-MO-AM synthesizer.

Behringer TD-3-MO-AM Analog Bass Line Synthesizer, angled front view

Figur 3: Vinklet view highlighting the various knobs and buttons for sound manipulation and sequencing.

TUNE: Justerer oscillatorens samlede tonehøjde.
SKÆRE AF: Controls the cutoff frequency of the low-pass filter.
RESONANS: Adjusts the resonance of the filter, creating a more pronounced or "squelchy" sound.
KUVERT: Controls the amount of envelope modulation applied to the filter cutoff.
HENFALD: Indstiller henfaldstiden for envelope'en.
ACCENT: Adjusts the intensity of accented notes in the sequence.
TID: Controls the playback speed of the sequencer.
BØGEFORM: Selects between sawtooth and square waveforms for the VCO.
FORVRÆNGNING: Engages and controls the built-in distortion effect.
BIND: Justerer det samlede outputniveau.
SEQUENCER CONTROLS: Buttons for pattern selection, step input, accent, slide, and various time modes.

Sequencing Basics:

The TD-3-MO-AM features a powerful 16-step sequencer. To create a pattern:

Vælg en SPORE og PATTERN GROUP using the rotary switches.
Indtast SKRIVE mode.
Input notes using the pitch mode buttons (C, C#, D, etc.) and apply ACCENT or GLIDE som ønsket.
Trykke START/STOP to play your sequence.

Refer to the detailed operational guide available on the Behringer support website for advanced sequencing techniques and MIDI implementation.

Opretholdelse

Proper care and maintenance will ensure the longevity and optimal performance of your TD-3-MO-AM synthesizer.

Rensning:

Afbryd altid strømmen før rengøring.
Brug en blød, tør klud til at tørre enhedens yderside af.
Til genstridigt snavs, en let damp en klud med mild sæbe kan bruges, efterfulgt af en tør klud.
Avoid abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.

Opbevaring:

Store the synthesizer in a cool, dry place away from direct sunlight and extreme temperatures.
If storing for an extended period, it is recommended to use the original packaging or a protective case to prevent dust accumulation and physical damage.

Firmwareopdateringer:

Kontroller Behringer regelmæssigt website for firmware updates. Updates can provide new features, performance improvements, and bug fixes. Follow the instructions provided with the firmware update carefully.

Fejlfinding

This section addresses common issues you might encounter with your TD-3-MO-AM. If you experience problems not covered here, please contact Behringer support.

Problem	Mulig årsag	Løsning
Ingen lydudgang.	Strømmen er ikke tilsluttet, eller enheden er slukket. Lydstyrkeknappen er skruet ned. Kabler forkert tilsluttet. External mixer/amp problemer.	Ensure power adapter is connected and unit is powered on. Forøg BIND knop. Check all audio cables for proper connection to PRODUKTION og høretelefoner. Verify external audio equipment is functioning correctly.
MIDI not responding.	Forkert MIDI-kabelforbindelse. MIDI settings on TD-3-MO-AM or external device. USB driver issues (for USB MIDI).	Ensure MIDI cables are connected to MIDI IN og MIDI OUT / THRU korrekt. Check MIDI channel settings on both the synthesizer and your external MIDI device. Install the latest USB drivers from the Behringer website if using USB MIDI.
Sequenceren afspiller ikke.	Not in Play mode. No pattern programmed. Tempo set too low.	Sørg for MODE kontakten er indstillet til SPIL. Program a pattern using the SKRIVE mode. Forøg TEMPO knop.

Specifikationer

Detailed technical specifications for the Behringer TD-3-MO-AM Analog Bass Line Synthesizer.

Feature	Detalje
Modelnavn	TD-3-MO-AM
Varemodelnummer	000-EYG02-00010
Synthesizer Type	Analog baslinjesyntetiser
Oscillator	VCO with Sawtooth and Square Waveforms, Sub-Harmonics Oscillator
Filter	4-pole Low-Pass Resonant Filter (MIDI-Controllable VCF)
Sequencer	16-step, 7 tracks, 250 user patterns per track
Forbindelse	MIDI In/Out/Thru, USB, Audio Output (1/4" TS), Phones (1/4" TRS), CV/Gate (Filter In, Sync In, CV Out, Gate Out)
Dimensioner (L x B x H)	6.5 x 12.01 x 2.2 tommer (16.51 x 30.51 x 5.59 cm)
Vægt	1.76 pund (800 gram)
Kropsmateriale	Bas træ
Farve	Rav
Fabrikant	Music Tribe USA

Garanti og support

Behringer products are designed for reliability and performance. For detailed warranty information and technical support, please visit the official Behringer webwebstedet eller kontakt din lokale forhandler.

Online support: Access FAQs, download manuals, and find firmware updates on the Behringer support page.
Produktregistrering: Register your product online to receive important updates and activate your warranty.
Servicecentre: Locate authorized service centers for repairs and maintenance.

For the most current information, please visit: www.behringer.com/support

	Behringer TD-3-MO "Modded Out" Analog Bass Line Synthesizer Lynstartguide En hurtigstartguide til Behringer TD-3-MO "Modded Out" analog baslinjesynthesizer, der dækker opsætning, tilslutninger, software- og hardwarekonfiguration, tuning, synkronisering og clocktypeindstillinger, signalflow og grundlæggende betjening.
	Behringer TD-3-MO Lynstartguide En hurtigstartguide til Behringer TD-3-MO "Modded Out" analog baslinjesynthesizer, der dækker opsætning, tilslutninger, software- og hardwarekonfiguration, tuning, synkronisering og clock-typeindstillinger samt grundlæggende betjening.
	Behringer TD-3-MO-SR/TD-3-MO-AM Analog Bass Line Synthesizer Lynstartguide Lynstartguide og betjeningsmanual til Behringer TD-3-MO-SR/TD-3-MO-AM "Modded Out" analog baslinjesynthesizer, der dækker opsætning, kontroller, mønsteroprettelse, sporsekvensering og tekniske specifikationer.
	Behringer TD-3 hurtigstartguide Denne vejledning indeholder vigtige sikkerhedsinstruktioner og opsætningsoplysninger til Behringer TD-3 analog baslinjesynthesizer.
	Behringer TD-3 analog baslinjesynthesizer hurtigstartguide Start din musikalske rejse med Behringer TD-3 analog baslinjesynthesizer. Denne hurtigstartguide giver vigtige oplysninger om opsætning, tilslutninger, kontroller og betjening af TD-3, et kraftfuldt instrument med en klassisk analog lydmotor, sequencer og effekter.
	Behringer MonoPoly analog synthesizer: Hurtigstartguide Kom i gang med Behringer MonoPoly, en analog 4-stemmig polyfonisk synthesizer med 37 tangenter i fuld størrelse, 4 VCO'er, VCF, 2 LFO'er, 2 envelopes, Sync og Cross Modulation samt en arpeggiator. Denne guide dækker opsætning, kontroller, tilslutning og grundlæggende betjening.

Behringer 000-EYG02-00010

Behringer TD-3-MO-AM Analog Bass Line Synthesizer