1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your KING K902-W Hoot WiFi Smart Programmable Thermostat. This device is designed to control line voltage electric heating systems, offering advanced programming capabilities and remote control via the Hoot smartphone application. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Billede: Forside view of the KING K902-W Hoot WiFi Smart Programmable Thermostat, displaying current temperature and schedule.
2. Sikkerhedsoplysninger
ADVARSEL: Electrical shock hazard. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Failure to follow these instructions could result in serious injury or death.
- Always disconnect power at the main service panel before installing or servicing the thermostat.
- This thermostat is designed for line voltage electric heating systems only (120/208/240V). Do not use with low voltage systems (e.g., gas furnaces, oil furnaces, central air conditioners).
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Do not operate the thermostat with a damaged casing or if it has been exposed to water.
- Keep the thermostat away from direct sunlight, heat sources, and drafts for accurate temperature sensing.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- KING K902-W Hoot WiFi Smart Programmable Thermostat
- Monteringsskruer
- Brugervejledning (dette dokument)
4. Installation
4.1 Wiring (Double Pole, 4-Wire)
The K902-W thermostat is designed for double pole, 4-wire line voltage installations (120/208/240V). It is crucial to follow the wiring diagram provided and adhere to all local electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Afbryd strømmen: Turn off power to the heating circuit at the main service panel before beginning.
- Fjern gammel termostat: Carefully remove your existing thermostat. Note the wiring connections.
- Tilslut ledninger: Connect the four wires from your heating system to the corresponding terminals on the K902-W thermostat. Typically, two wires are for the incoming line voltage and two wires go to the heater load. Refer to the diagram below for specific terminal identification.
- Sikre forbindelser: Sørg for, at alle ledningsforbindelser er tætte og sikre.
Billede: Bagside view of the KING K902-W thermostat, illustrating the wiring terminals for double pole, 4-wire connection.
4.2 Montering
After wiring, carefully mount the thermostat to the wall electrical box using the provided screws. Ensure the thermostat is level and securely fastened. Do not overtighten the screws.
5. Første opsætning og Wi-Fi-forbindelse
Once installed and power is restored, the thermostat will power on. Follow the on-screen prompts for initial setup, including date, time, and temperature unit selection.
Image: Close-up of the KING K902-W thermostat's LCD touchscreen, displaying initial setup options.
5.1 Hoot Smart Phone App
To utilize the smart features and remote control, download the Hoot Smart Phone App from your device's app store. The app is compatible with both iOS and Android devices.
- Download app: Søg efter "Hoot Smart" in the Apple App Store or Google Play Store.
- Opret konto: Open the app and follow the instructions to create a new user account.
- Pair Thermostat: In the app, select to add a new device. Follow the on-screen instructions on both the app and the thermostat to connect to your home Wi-Fi network. Note: The thermostat supports 2.4GHz Wi-Fi networks only.
Image: A smartphone screen showing the Hoot application interface, used for remote control and programming of the thermostat.
6. Betjeningsvejledning
6.1 Berøringsskærmsgrænseflade
The thermostat features a large LCD touchscreen for direct control. The main screen displays the current temperature, set temperature, operating mode, and Wi-Fi status. Use the up/down arrows to adjust the set temperature. The power icon turns the heating system on or off. The hand icon activates a temporary hold.
6.2 Programmeringsplaner
The K902-W allows for programmable schedules with 4 or 6 time periods per day. This feature helps optimize energy usage by adjusting temperatures automatically based on your daily routine. Schedules can be set directly on the thermostat or more conveniently through the Hoot app.
- Access the 'Schedule' or 'Program' menu on the thermostat or within the Hoot app.
- Define desired temperatures for each time period (e.g., Wake, Away, Home, Sleep).
- Apply the schedule to specific days of the week or all days.
6.3 Temperaturkontrol
You can manually adjust the temperature at any time. This adjustment will typically override the current schedule until the next scheduled period begins. To maintain a specific temperature indefinitely, use the 'Hold' function. The thermostat also features a user-defined maximum temperature lock to prevent settings from exceeding a certain limit.
7. Vedligeholdelse
The KING K902-W thermostat requires minimal maintenance.
- Rensning: Wipe the screen and casing med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Firmwareopdateringer: The thermostat supports Over-The-Air (OTA) firmware updates. Ensure your thermostat is connected to Wi-Fi to receive automatic updates that improve performance and add new features.
8. Fejlfinding
Se tabellen nedenfor for almindelige problemer og deres løsninger.
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Termostaten tænder ikke | No power from circuit breaker; incorrect wiring. | Check circuit breaker and ensure it is ON. Verify wiring connections are correct and secure. Consult an electrician if necessary. |
| Problemer med Wi-Fi-forbindelse | Incorrect Wi-Fi password; 5GHz network selected; weak signal; router issues. | Ensure correct 2.4GHz Wi-Fi network and password. Move thermostat closer to router or consider a Wi-Fi extender. Restart your router. |
| Thermostat screen frozen/unresponsive | Midlertidig softwarefejl. | Turn off power to the thermostat at the circuit breaker for 30 seconds, then restore power. |
| Heater not shutting off or running continuously | Faulty thermostat; wiring error; thermostat placed in a cold draft. | Verify thermostat settings and schedule. Check wiring for shorts. Ensure thermostat is not in a cold draft. If issue persists, contact support. |
| Upræcise temperaturmålinger | Thermostat exposed to direct sunlight, heat source, or cold draft. | Relocate thermostat if possible, or shield it from environmental factors affecting its sensor. |
9. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | K902-W |
| Voltage | 120/208/240 volt |
| Ledningskonfiguration | Double Pole, 4-Wire |
| Wattage | 3840 watt (maks.) |
| Temperaturområde | 41º - 90ºF (5º - 32ºC) |
| Temperaturkontrol nøjagtighed | ±1ºF |
| Forbindelse | Wi-Fi (kun 2.4 GHz) |
| Display Type | Large LCD Touchscreen |
| Kontrolmetode | Touch, Smartphone App |
| Monteringstype | Vægmontering |
| Produktdimensioner | 2 x 4 x 4 tommer |
| Varens vægt | 11.4 ounce |
| UPC | 093319335109 |
10. Garanti og support
KING products are manufactured to high-quality standards. This thermostat is covered by the manufacturer's limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official KING website. For technical support, troubleshooting assistance, or warranty claims, please contact KING customer service.
Kontaktoplysninger: Please refer to the official KING website or your product packaging for the most current customer support contact details.
Du kan også besøge KING Butik på Amazon for mere produktinformation.
