Nerf Elite 2.0 Volt SD-1 Blaster brugsanvisning
Model: E9952F03 | Brand: Nerf
Indledning
The Nerf Elite 2.0 Volt SD-1 Blaster is designed for fun, active play, featuring a light beam for enhanced targeting. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and safety guidelines.
Sikkerhedsoplysninger
ADVARSEL: FOR AT UNDGÅ ØJENSKADER.
Do not aim at eyes or face. Use of eyewear is recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.
ADVARSEL: KVÆLNINGSFARE - Små dele kan dannes. Ikke egnet til børn under 3 år.
Anbefales fra 8 år og op.
Hvad er der i æsken
- Nerf Elite 2.0 Volt SD-1 Blaster
- 6 officielle Nerf Elite-pile
- Brugsanvisning (dette dokument)
Image: The Nerf Elite 2.0 Volt SD-1 Blaster shown alongside the included 6 Nerf Elite Darts.
Opsætning
1. Batteriinstallation
The light beam feature requires 2x 1.5V AAA alkaline batteries (not included).
- Find batterirummet på blasteren.
- Skru dækslet til batterirummet af med en stjerneskruetrækker (medfølger ikke).
- Isæt 2 AAA-batterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
- Sæt dækslet på igen og fastgør det med skruen.
2. Indlæsning af dartpile
The Volt SD-1 blaster is a single-shot blaster. It includes storage for additional darts.
- Insert one official Nerf Elite dart into the front barrel of the blaster.
- Additional darts can be stored in the integrated dart storage slots on the blaster.
Billede: Et nærbillede view of the blaster, highlighting the front-loading barrel and the dart storage slots.
Betjeningsvejledning
1. Klargøring af blæseren
To prepare the blaster for firing, pull the priming handle located at the back of the blaster all the way back until it clicks into place. Then, push it forward to return it to its original position.
2. Affyring af pile
Once primed, aim the blaster at your target and pull the trigger to fire the dart.
3. Using the Light Beam Targeting
The Volt SD-1 features a light beam to assist with targeting, especially in low-light conditions. The beam works on targets up to 15 feet (4.5 meters) away.
- Press the button located near the front of the blaster to activate the light beam.
- Align the light beam with your target for improved accuracy.
- Press the button again to turn off the light beam.
Image: The blaster with its light beam activated, demonstrating the targeting feature.
Opretholdelse
- Keep the blaster clean by wiping it with a dry cloth.
- Avoid exposing the blaster to extreme temperatures or moisture.
- Store darts in a clean, dry place to maintain their integrity.
- Fjern batterierne, hvis blasteren ikke skal bruges i længere tid, for at forhindre lækage.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Dart affyres ikke eller affyres svagt. | Blaster not fully primed; damaged dart; non-official dart. | Ensure priming handle is pulled back completely until it clicks. Use only official Nerf Elite darts. Replace damaged darts. |
| Light beam not working. | Batterierne er døde eller forkert installeret. | Check battery polarity. Replace with fresh AAA alkaline batteries. |
Specifikationer
- Modelnummer: E9952F03
- Produktdimensioner: 0.39 x 0.39 x 0.39 tommer
- Varens vægt: 12 ounce
- Producentens anbefalede alder: 8 - 8 år
- Batterier påkrævet: 2 x 1.5V AAA alkaliske batterier (medfølger ikke)
- Darttype: Official Nerf Elite Darts
- Light Beam Range: Op til 15 fod (4.5 meter)
- Fabrikant: Hasbro
Garanti og support
For information regarding product warranty or customer support, please refer to the manufacturer's official webwebstedet eller kontakt deres kundeservice direkte. Specifikke garantioplysninger kan variere afhængigt af region og forhandler.
Producent: Hasbro
Besøg Nerf Store for flere produkter og information.
