Indledning
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Okin Refined-R Power Recliner Motor Actuator. This motor is designed as a direct replacement for Okin JLDQ.14.270.114A and can also replace JLDQ.14.270.114F series motors, with minor differences that do not affect functionality.
The actuator motor set includes one motor and one connector. The connector features a 2-pin plug with a clip, specifically designed for connection to the master motor or power supply.
Figur 1: Overview of the Okin Refined-R JLDQ-14 Power Recliner Motor Actuator.
Opsætning og installation
Before beginning installation, ensure your recliner's power is disconnected. It is crucial to verify that the replacement motor's brand and model match your existing unit to ensure compatibility with your recliner's frame, which has specific requirements for actuator dimensions, stroke, and plugs.
Kompatibilitetskontrol:
- Confirm your existing motor is an Okin JLDQ.14.270.114A or JLDQ.14.270.114F series.
- Ensure the physical dimensions and plug type (2-pin with clip) are consistent with your recliner's requirements.
Figur 2: Nærbillede view of the motor's identification label, showing model and specifications.
Installationstrin:
- Afbryd strømmen: Unplug the recliner from the wall outlet to prevent accidental operation during installation.
- Fjern den gamle motor: Fjern forsigtigt den gamle motor fra lænestolens stel. Bemærk, hvordan den er monteret og tilsluttet.
- Tilslut ny motor: Attach the new Okin motor to the recliner frame using the existing mounting points. Ensure it is securely fastened.
- Stikforbindelse: Connect the 2-pin plug from the new motor to the corresponding receptacle on your recliner's power supply or control box. Ensure the clip engages properly for a secure connection.
Figure 3: Detail of the 2-pin plug for connecting to the power supply.
The installation process is designed to be straightforward. Once installed, the motor operates quietly.
Betjeningsvejledning
The Okin Refined-R motor actuator is an integral component of your power recliner, enabling smooth and controlled movement. Operation is typically controlled via the recliner's hand control or integrated buttons.
Standarddrift:
- Once installed and connected to power, use your recliner's standard controls (buttons or remote) to extend or retract the footrest and recline the backrest.
- The motor is designed for intermittent use. Its operational frequency is specified as On 1 minute / Off 8 minutes. This duty cycle ensures the longevity and proper functioning of the motor by allowing it to cool down between operations. Avoid continuous operation beyond the recommended duty cycle.
Opretholdelse
To ensure the long-term performance and reliability of your Okin Refined-R motor actuator, periodic maintenance is recommended.
Generelle vedligeholdelsestips:
- Hold rent: Regularly inspect the motor and surrounding areas for dust, debris, or obstructions. Gently wipe clean with a dry cloth.
- Tjek forbindelser: Periodically inspect all electrical connections, especially the 2-pin plug, to ensure they are secure and free from damage.
- Smøring: Motoren er generelt vedligeholdelsesfri med hensyn til intern smøring. Forsøg ikke at smøre interne komponenter, medmindre Okin support specifikt har anvist det.
- Undgå overbelastning: Do not exceed the recliner's weight capacity, as this can strain the motor and reduce its lifespan.
Fejlfinding
If your recliner is not functioning correctly after motor replacement, follow these troubleshooting steps:
Almindelige problemer og løsninger:
- No Movement/Power:
- First, troubleshoot the recliner's switch and power supply. Ensure the recliner is properly plugged into a working electrical outlet.
- Kontroller netledningen for synlige skader.
- Verify that the 2-pin plug from the motor is securely connected to the power supply.
- Motoren reagerer ikke:
- Ensure the motor model matches your recliner's requirements. While this motor can replace JLDQ.14.270.114F, slight differences might exist.
- Inspect the motor's wiring for any pinches, cuts, or loose connections.
- Usædvanlige lyde:
- Check for any obstructions around the motor or linkage mechanisms that might be causing friction or binding.
- Ensure the motor is securely mounted and not vibrating against the frame.
If these steps do not resolve the issue, it is recommended to contact Okin customer support for further assistance.
Specifikationer
Detailed technical specifications for the Okin Refined-R JLDQ.14.270.114A motor actuator:
| Feature | Specifikation |
|---|---|
| Model | JLDQ.14.270.114A (also replaces JLDQ.14.270.114F series) |
| Udseende | Sort (PA), Sølv Hvid (Aluminium) |
| Slagtilfælde | 114 mm |
| Minimumsdimensioner (krympe) | 270 mm |
| Maximum Dimension (Extend) | 384 mm |
| Belastning (trykkraft) | 1000 N |
| Driftsfrekvens | Tændt 1 min / Slukket 8 min |
| Forbindelse | 2-pin plug with clip for master motor/power supply |
| Varens vægt | 2.77 pund |
| Pakkedimensioner | 14.37 x 6.3 x 4.65 tommer |
Figure 4: Visual summary of key product specifications.
Garanti og support
For information regarding warranty coverage or technical support, please refer to the official Okin website or contact their customer service directly. It is recommended to have your product model number (JLDQ.14.270.114A or JLDQ.14.270.114F) and purchase details available when contacting support.
Du kan finde mere information og kontaktoplysninger ved at besøge Okin-butikken på Amazon.
