Midea Vanddispenser MYL712S-B Brugermanual

Indledning

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Midea Water Dispenser Model MYL712S-B. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Midea MYL712S-B is a floor-standing water dispenser offering hot, cold, and normal temperature water, featuring a 3-push button faucet and an integrated 15-liter small refrigerator compartment.

Sikkerhedsinstruktioner

To prevent personal injury or property damage, observe the following safety precautions:

• Ensure the dispenser is connected to a grounded power outlet (220V/60Hz).
• Nedsænk ikke dispenseren, ledningen eller stikket i vand eller andre væsker.
• Hold dispenseren væk fra direkte sollys og varmekilder.
• Brug ikke dispenseren med en beskadiget ledning eller stik.
• Tag stikket ud af dispenseren, før du rengør eller udfører vedligeholdelse.
• Supervise children when they are near the appliance. The hot water faucet has a safety lock.
• Bloker ikke ventilationsåbningerne på apparatet.
• Only use bottled water suitable for water dispensers.
• Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.

Produkt overview

Gør dig bekendt med komponenterne i din Midea vanddispenser.

Figur 1: Front view of the Midea MYL712S-B Water Dispenser. This image shows the dispenser in its upright, floor-standing position. The upper section contains the water bottle receptacle, the three push-button faucets for hot, cold, and normal water, and the drip tray. Below the dispenser section, a small refrigerator compartment is visible, indicated by the word "REFRIGERATOR" in blue lettering.

Nøglekomponenter:

• Beholder til vandflaske: Located at the top, designed to hold standard water bottles.
• Push-Button Faucets: Three distinct buttons for dispensing hot, cold, and normal temperature water.
• Drypbakke: Opsamler spildt vand, aftagelig for nem rengøring.
• Indikatorlys: Display power status, heating, and cooling operations.
• Køleskab: A 15-liter storage space at the bottom for cooling beverages or small items.
• Strømledning: Til tilslutning til en stikkontakt.

Opsætning og installation

1. Udpakning: Tag forsigtigt dispenseren ud af emballagen. Undersøg den for eventuelle skader.
2. Placering: Place the dispenser on a flat, stable surface in a well-ventilated area, away from direct sunlight and heat sources. Ensure there is at least 10 cm (4 inches) of space from walls for proper ventilation.
3. Indledende rengøring: Before first use, clean the drip tray and water tank (if accessible) with mild soap and water. Rinse thoroughly.
4. Installation af vandflaske:
   • Remove the protective seal from a new water bottle.
   • Carefully invert the water bottle and place it firmly onto the water bottle receptacle at the top of the dispenser. Ensure it is seated correctly to prevent leaks.
5. Strømtilslutning: Sæt netledningen i en jordet 220V/60Hz stikkontakt.
6. Indledende vandstrøm: Before turning on heating or cooling, dispense at least 1 liter of water from each faucet (hot, cold, normal) to ensure the tanks are filled and air is purged from the system. This prevents damage to heating elements.

Betjeningsvejledning

Dispensering af vand:

• Koldt vand: Press the blue button. The cold water indicator light will illuminate when cooling is active.
• Varmt vand: Press the red button. For safety, the hot water faucet typically has a child-safety lock. Push the safety lock forward or backward (depending on design) and then press the red button. The hot water indicator light will illuminate when heating is active.
• Normal Temperature Water: Press the green or uncolored button (if applicable). This water is dispensed at room temperature.

Allow approximately 15-30 minutes for the water to reach desired hot or cold temperatures after initial setup or refilling.

Using the Refrigerator Compartment:

The lower compartment functions as a small refrigerator. Open the door to store beverages or small food items. This compartment is not designed for freezing or long-term storage of perishable goods.

Vedligeholdelse og rengøring

Regelmæssig rengøring sikrer optimal ydeevne og hygiejne.

1. Udvendig rengøring: Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
2. Drypbakke: Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse and dry thoroughly before replacing.
3. Water Tank (Descaling):
   • Tag stikket ud af dispenseren og fjern vandflasken.
   • Drain all water from the hot and cold tanks using the respective faucets.
   • For descaling, a solution of water and white vinegar (e.g., 1 part vinegar to 4 parts water) can be used. Pour the solution into the water bottle receptacle and allow it to sit for 15-30 minutes.
   • Drain the solution completely. Rinse the tanks multiple times by filling with clean water and draining until no vinegar smell remains.
4. Kondensator spoler: Periodically clean the condenser coils at the back of the dispenser with a soft brush or vacuum cleaner to ensure efficient cooling. Ensure the dispenser is unplugged before cleaning the coils.

Fejlfinding

Specifikationer

Garanti og support

For warranty information and customer support, please refer to the warranty card included with your product or contact Midea customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Midea webwebstedet eller kontakt deres autoriserede servicecentre.